Metal Polishing - to much like hard work!
Metal Polishing - to much like hard work!
![[Image: dirty%20engine2.jpg]](https://lh5.ggpht.com/__au3oYfoKLQ/S3H6uRoqPqI/AAAAAAAABF8/-rRgYViY8Rw/s640/dirty%20engine2.jpg)
And after some serious elbow work, got it like this
![[Image: IMAG0007.jpg]](https://lh6.ggpht.com/__au3oYfoKLQ/TKinNZt8lII/AAAAAAAAQS4/NkXvzOcBucs/s640/IMAG0007.jpg)
Now that took me 2hrs and I reckon to get it with a mirror finish I'd need another week LOL
Kudos to those guys that polish their metal bits to a mirror finish, wish I had that patience
Toyota Altezza Z Edition.
![[Image: sig.jpg]](http://i5.photobucket.com/albums/y196/todd69/sig.jpg)
Well it used to look like this
And after some serious elbow work, got it like this
Now that took me 2hrs and I reckon to get it with a mirror finish I'd need another week LOL
Kudos to those guys that polish their metal bits to a mirror finish, wish I had that patience
Toyota Altezza Z Edition.
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino
22-08-2017, 07:51 AM #2miles better mate. now carry on and dont give up
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
22-08-2017, 07:58 AM #5look good mate, i know what you mean about the effort, it sucks lol
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
After the initial sand down give the parts a run over with this in a drill and it'll give them a mat finish, then go over it with some autosol metal polish, will start to come up to a shine after a bit :thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Looking good mate, if you want to speed up the polishing a bit buy one of these CLICK ME?
After the initial sand down give the parts a run over with this in a drill and it'll give them a mat finish, then go over it with some autosol metal polish, will start to come up to a shine after a bit :thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Bandit Looking good mate, if you want to speed up the polishing a bit buy one of these CLICK ME?
After the initial sand down give the parts a run over with this in a drill and it'll give them a mat finish, then go over it with some autosol metal polish, will start to come up to a shine after a bit :thumbup1:
Done, see if i can polish a couple of bits now lol
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
22-08-2017, 11:16 AM #7Bandit Looking good mate, if you want to speed up the polishing a bit buy one of these CLICK ME?
After the initial sand down give the parts a run over with this in a drill and it'll give them a mat finish, then go over it with some autosol metal polish, will start to come up to a shine after a bit :thumbup1:
Done, see if i can polish a couple of bits now lol
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Also hit one of the hit shields, which came up not to bad but I think it would really need chromed to be any good.
Must stop this!
![[Image: IMAG0012.jpg]](https://lh3.ggpht.com/__au3oYfoKLQ/TKnsHO1Z1KI/AAAAAAAAQUI/G15-fookJYw/s640/IMAG0012.jpg)
Toyota Altezza Z Edition.
Had a stab at the PS today, top came up like a mirror but didn't touch the sides, would really need to take it off.
Also hit one of the hit shields, which came up not to bad but I think it would really need chromed to be any good.
Must stop this!
Toyota Altezza Z Edition.
looking good mate
more patience than me
1 Guest(s)
1 Guest(s)
Views 1,016
Last Post by
Views 1,510
Last Post by