Supra dials redlining - literally
Supra dials redlining - literally
09-03-2018, 12:22 AM
toxo I think it'd look a whole lot better if they weren't blue to start with (I hate blue dials!!) and if it only changed the rev counter, changed the speedo when that got past say 120mph, etc, to function more like warnings
hock:hock: What's wrong with blue dials? :lol: Look better than when they were orange in my car anyway :ppurplewitch That would either drive me nuts .... or I'd be testing it ever ten seconds and blow up my car
Me too... except I think my car takes more than 10 seconds to actually GET to the redline point :lol: I'd have to set it at around 4k revs to ever see it...
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
toxo I think it'd look a whole lot better if they weren't blue to start with (I hate blue dials!!) and if it only changed the rev counter, changed the speedo when that got past say 120mph, etc, to function more like warnings
hock:hock: What's wrong with blue dials? :lol: Look better than when they were orange in my car anyway :ppurplewitch That would either drive me nuts .... or I'd be testing it ever ten seconds and blow up my car
Me too... except I think my car takes more than 10 seconds to actually GET to the redline point :lol: I'd have to set it at around 4k revs to ever see it...
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
09-03-2018, 12:31 AM
DaveEdin
Chavtastic
Don't get me wrong, blue dials can be made to look great but most people just replace 1 set of bulbs for another without thinking about what will happen to the needles, useability (your eyes can't focus on bright red and bright blue at the same time for example, opposite ends of the visible spectrum), brightness etc. You only need to look at a set of VW dials to see blue LEDs done well. ![[Image: 3661180826_e0de75f4fc.jpg]](http://farm3.static.flickr.com/2438/3661180826_e0de75f4fc.jpg)
Not too bright, the needles are contrasting and still well visible, and so on. They look tidy and professional, unlike the Supra dials in the video which are way too bright and if anything would actually be a distraction while driving! There's so much glare inside the binnacle it just looks naff. More brightness in the backlights makes it harder to pick out the needles, especially if they're the same colour as the backlight itself.
Hope that makes sense, I'm not knocking blue dials per se, just that when I usually see them 'modified' to blue they never look that good!
Edited 20-04-2011, 10:09 AM by toxo.
DaveEdin
Chavtastic
Don't get me wrong, blue dials can be made to look great but most people just replace 1 set of bulbs for another without thinking about what will happen to the needles, useability (your eyes can't focus on bright red and bright blue at the same time for example, opposite ends of the visible spectrum), brightness etc. You only need to look at a set of VW dials to see blue LEDs done well. Not too bright, the needles are contrasting and still well visible, and so on. They look tidy and professional, unlike the Supra dials in the video which are way too bright and if anything would actually be a distraction while driving! There's so much glare inside the binnacle it just looks naff. More brightness in the backlights makes it harder to pick out the needles, especially if they're the same colour as the backlight itself.
Hope that makes sense, I'm not knocking blue dials per se, just that when I usually see them 'modified' to blue they never look that good!
09-03-2018, 12:36 AM
Mine look nice and bright, with the needles perfectly visible as well (pic's a bit rubbish, my phone camera's fault)
![[Image: IMAG0494.jpg]](http://i919.photobucket.com/albums/ad36/daveplank/IMAG0494.jpg)
As with all mods though, some will like, some won't
And I like, which is all that really matters in the end :wink:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Heh I know what you mean, there is rather a lot of glare in the supra...
Mine look nice and bright, with the needles perfectly visible as well (pic's a bit rubbish, my phone camera's fault)
As with all mods though, some will like, some won't And I like, which is all that really matters in the end :wink:
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
09-03-2018, 12:41 AM
You can see exactly what I mean about needles from your photo. As you say it's a cack camera phone shot but where is your rev counter needle?
Speedo needle gets dimmer towards the end (common problem with changing colour actually).
Could be worse, you could've fitted those hideous visual performance / el glow dials :lol:
You can see exactly what I mean about needles from your photo. As you say it's a cack camera phone shot but where is your rev counter needle? Speedo needle gets dimmer towards the end (common problem with changing colour actually).
09-03-2018, 12:44 AM
:biggrin: Looks good to me when driving though...
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
It's there :lol: pointing at around 800rpm... It's perfectly visible to the eye,but I took 4 shots with the camera and none of the buggers showed the needles to any great degree... You can hardly tell where any of them are in the pics though...
:biggrin: Looks good to me when driving though...
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
![[Image: 2012_lexus_lfa_0147_cd_gallery.jpg]](http://www.caranddriver.com/var/ezflow_site/storage/images/reviews/car/10q1/world_exclusive!_2012_lexus_lfa_tested-short_take_road_test/gallery/2012_lexus_lfa_instrument_cluster_photo_47/3458750-1-eng-US/2012_lexus_lfa_0147_cd_gallery.jpg)
09-03-2018, 03:40 AM
[SIGPIC][/SIGPIC]
[COLOR="Orange"]JAPANESE PERFORMANCE FEATURE SEPT 2011
BEST OVERALL SUPRA WINNER ACE CAFE 23/06/11
2nd BEST IN SHOW (JAE 2011)
3rd BEST MODIFIED (JAE 2011)
[/COLOR]
[COLOR="Orange"]See my build thread here
[/COLOR]
http://www.outlawjapclub.co.uk/forum/sho...php?t=5851
lol thats great, i would have it in mine lol
[SIGPIC][/SIGPIC]
[COLOR="Orange"]JAPANESE PERFORMANCE FEATURE SEPT 2011
BEST OVERALL SUPRA WINNER ACE CAFE 23/06/11
2nd BEST IN SHOW (JAE 2011)
3rd BEST MODIFIED (JAE 2011)
[/COLOR]
[COLOR="Orange"]See my build thread here
[/COLOR]
http://www.outlawjapclub.co.uk/forum/sho...php?t=5851
09-03-2018, 08:49 AM
And I'd definitely agree with those who have mentioned the LFA dials!
sprinter2012
09-03-2018, 08:49 AM #20I'd take a guess and say they have been done with RGB LED's but only using the pins for red and blue, how they get it do change though I don't know. Probably linked to an aftermarket rev limiter of some sort.
And I'd definitely agree with those who have mentioned the LFA dials!
Recently Browsing
1 Guest(s)
1 Guest(s)
Recently Browsing
1 Guest(s)
1 Guest(s)
Related Threads…
Replies 36
Views 688
Views 688
14-03-2020, 12:46 PM
Last Post byis300_dino
Last Post by
Replies 15
Views 599
Views 599
13-01-2019, 08:33 AM
Last Post byracestyle
Last Post by
Replies 96
Views 3,160
Views 3,160
19-12-2018, 01:46 AM
Last Post byMikey
Last Post by
Replies 5
Views 324
Views 324
13-08-2018, 01:47 PM
Last Post byjay_russell
Last Post by
Replies 5
Views 327
Views 327
10-08-2018, 01:40 AM
Last Post byPhil01
Last Post by
Replies 20
Views 1,122
Views 1,122
16-07-2018, 12:16 PM
Last Post bynickie-b
Last Post by
Replies 26
Views 1,051
Views 1,051
23-05-2018, 03:28 PM
Last Post bySHAHZ
Last Post by
Replies 54
Views 1,598
Views 1,598
10-03-2018, 04:08 AM
Last Post bypurplewitch
Last Post by