Altezza Digital cluster project
Altezza Digital cluster project
no mate both mine are in place. is 200 is a little different maybe. the other one i have here is the same. you cant remove it as there is a plate over it. and the plate is stuck down
jay_russell no mate both mine are in place. is 200 is a little different maybe. the other one i have here is the same. you cant remove it as there is a plate over it. and the plate is stuck down
jay_russell no mate both mine are in place. is 200 is a little different maybe. the other one i have here is the same. you cant remove it as there is a plate over it. and the plate is stuck down
yer i've not go in from the back but the front as thats the side i need to get to. maybe thats why it's still in there
the good news is the 3 center dials can be changed out for my ones i have now so there will be no problems with the oil pressure
seecarr11 you got a modellista cluster!!! those are rare like rocketships that are made out of wood!!
you're sitting on a gold mine right there
seecarr11 you got a modellista cluster!!! those are rare like rocketships that are made out of wood!!
you're sitting on a gold mine right there
well as you can see the oil pressure has gone and in it's place is the original power meter from my cluster. now yo go and see if it all works
well i have a few lights on i should not have but not sure if thats a problem. the gauges in the middle dont all work but i might change out the small plus lead to mine as it have a few extra wires on it
it was only the top small gauge that was not working. it's only the average kmh dial. not like i use it anyhow and that since i put the turbo in it's way off. just need to fix the rest of the displays leds on the bottom digital part.waiting for them to come
that top light on is your headlight adjuster one isnt it? you havent got them have you? only in the ones with HID'sfrom stock?