Ice fitting time IS200!!
Ice fitting time IS200!!
the amp isnt so hard, again if you take your time.. remember to remove the ski hatch cover.
LEXUS IS200 Sport Navigator - 140.8db
Kenwood DNX 8220 BT - Custom OEM Screen Conversion - PS2 - Epic 150
Front: MB Quart QSC216 / Centre: MB Quart PKH110 / Rear:MB Quart RUA213 / Sub: MB Quart PWH 302 x 2 / AMPS: JL 1000/1 - JL 300/4
yep aerial into the blue auto antenna lead, you may also have a remote lead if not, its the same thing!
the amp isnt so hard, again if you take your time.. remember to remove the ski hatch cover.
LEXUS IS200 Sport Navigator - 140.8db
Kenwood DNX 8220 BT - Custom OEM Screen Conversion - PS2 - Epic 150
Front: MB Quart QSC216 / Centre: MB Quart PKH110 / Rear:MB Quart RUA213 / Sub: MB Quart PWH 302 x 2 / AMPS: JL 1000/1 - JL 300/4
Replacing the head unit initially seems like it's going to be hard, given all the bits you need to remove, but it's really very straightforward. You can of course ask on here if you get stuck or are unsure about something.
One other thing is that a new head unit might have an illumination feed, so that it can dim the head unit illumination when you turn your lights on. It's not mandatory to wire this up, but if it does have this function and you do want to use it, then you can just tap into one of the existing illumination wires in the dash - I will put up a separate thread on this.
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
25-06-2016, 01:28 AM #12You shouldn't really be able to damage the aircon unit. Just take the connectors out of it carefully, not doing anything silly (i.e. levering the connector itself and not just yanking the wires themselves lol). I'm sure it'll be fine.
Replacing the head unit initially seems like it's going to be hard, given all the bits you need to remove, but it's really very straightforward. You can of course ask on here if you get stuck or are unsure about something.
One other thing is that a new head unit might have an illumination feed, so that it can dim the head unit illumination when you turn your lights on. It's not mandatory to wire this up, but if it does have this function and you do want to use it, then you can just tap into one of the existing illumination wires in the dash - I will put up a separate thread on this.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
![[Image: NiksLex.jpg]](http://i356.photobucket.com/albums/oo2/n2khl/NiksLex.jpg)
did you have a look at the walkthrough on here for doing it? Well done for getting it sorted, and glad that you've got over the swine flu now.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
11-07-2016, 10:37 PM #16I still found the amp a pain even with the walkthrough. But without the walkthrough I think I would have given up !
Well done for getting it sorted, and glad that you've got over the swine flu now.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
2 Guest(s)
2 Guest(s)
Views 913
Last Post by
Views 18,884
Last Post by
Views 2,184
Last Post by
Views 670
Last Post by
Views 627
Last Post by