JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Modifications & Tuning anyone got there arches rolled and photos and widest wheels you can fit 18" ???

anyone got there arches rolled and photos and widest wheels you can fit 18" ???

anyone got there arches rolled and photos and widest wheels you can fit 18" ???

Pages (4): 1 2 3 4 Next
danielson
Member
109
08-02-2018, 01:24 PM
#1
whats the widest wheels i could fit to my is 200 in 18"
danielson
08-02-2018, 01:24 PM #1

whats the widest wheels i could fit to my is 200 in 18"

jimxms
Posting Freak
2,473
08-02-2018, 11:09 PM
#2
Depends just as much on offsets and lowering tbh.

I'm about to fit some 9" to the back of mine with rolled arches. They have a 37 offset and I'll be running a slight stretch with 225 tyres. The car is also dropped quite low on coilies.

I have heard that someone across the pond has exactly the same setup as me with 10mm spacers in the rear too. But being as they are in the USA with nice flat roads, they probably have the suspension super hard.
jimxms
08-02-2018, 11:09 PM #2

Depends just as much on offsets and lowering tbh.

I'm about to fit some 9" to the back of mine with rolled arches. They have a 37 offset and I'll be running a slight stretch with 225 tyres. The car is also dropped quite low on coilies.

I have heard that someone across the pond has exactly the same setup as me with 10mm spacers in the rear too. But being as they are in the USA with nice flat roads, they probably have the suspension super hard.

FirebirdPhil
Posting Freak
7,101
09-02-2018, 03:06 AM
#3
Have a chat with Jay_Russel, he fits 20" wheels every summer and has had NO arch rolling.

"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
09-02-2018, 03:06 AM #3

Have a chat with Jay_Russel, he fits 20" wheels every summer and has had NO arch rolling.


"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"

Rabster
Posting Freak
10,234
09-02-2018, 03:13 AM
#4
i have 19's on mine but had the arches rolled
Rabster
09-02-2018, 03:13 AM #4

i have 19's on mine but had the arches rolled

danielson
Member
109
09-02-2018, 08:14 AM
#5
would like 10js got to work out the offset jimxms are they 37 + i know the is has a strange ofset with 10js i would think i would need + 55+57
danielson
09-02-2018, 08:14 AM #5

would like 10js got to work out the offset jimxms are they 37 + i know the is has a strange ofset with 10js i would think i would need + 55+57

jimxms
Posting Freak
2,473
09-02-2018, 09:21 AM
#6
I could be wrong, but I think 10J's would be very hard to fit under without stretched tyres, pulled+rolled arches and stiff suspension. Regardless of offset
jimxms
09-02-2018, 09:21 AM #6

I could be wrong, but I think 10J's would be very hard to fit under without stretched tyres, pulled+rolled arches and stiff suspension. Regardless of offset

danielson
Member
109
09-02-2018, 09:55 AM
#7
after i get my arches rolled and pulled i will try and find a wheel to see if it fits were would i find wheels like that in the uk ??? looked on ebay in japan theres some but how much Confusedhock:
danielson
09-02-2018, 09:55 AM #7

after i get my arches rolled and pulled i will try and find a wheel to see if it fits were would i find wheels like that in the uk ??? looked on ebay in japan theres some but how much Confusedhock:

Chri5
Posting Freak
1,894
09-02-2018, 11:12 AM
#8
danielson would like 10js got to work out the offset jimxms are they 37 + i know the is has a strange ofset with 10js i would think i would need + 55+57

The offset would need to be lower than that otherwise it'll be into the suspension won't it???
My 200sx is 9.5j(iirc) et37 but I run 25mm spacers to push the wheel out and to clear the legs.
Chri5
09-02-2018, 11:12 AM #8

danielson would like 10js got to work out the offset jimxms are they 37 + i know the is has a strange ofset with 10js i would think i would need + 55+57

The offset would need to be lower than that otherwise it'll be into the suspension won't it???
My 200sx is 9.5j(iirc) et37 but I run 25mm spacers to push the wheel out and to clear the legs.

jimxms
Posting Freak
2,473
09-02-2018, 11:17 AM
#9
Give willtheyfit.com a try.

Here's a rough idea of how a 10J with 32 offset and 255 tyres would compare to the stock 17" alloys (ignore the location of the suspension in that image)

[Image: wheelimage.php?tyrediameter=625.3&tyrewi...aspect2=45]
jimxms
09-02-2018, 11:17 AM #9

Give willtheyfit.com a try.

Here's a rough idea of how a 10J with 32 offset and 255 tyres would compare to the stock 17" alloys (ignore the location of the suspension in that image)

[Image: wheelimage.php?tyrediameter=625.3&tyrewi...aspect2=45]

Asi
Posting Freak
2,510
09-02-2018, 11:49 AM
#10
i have rolled the arches on mine all round.
the size are 9.5j wide offset of 20
the front are 8.5j offset of 25

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
Asi
09-02-2018, 11:49 AM #10

i have rolled the arches on mine all round.
the size are 9.5j wide offset of 20
the front are 8.5j offset of 25


[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

Pages (4): 1 2 3 4 Next
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 3
Views 239
11-07-2020, 10:33 PM
Last Post by Fry-Up
Replies 34
Views 1,584
27-07-2017, 07:33 AM
Last Post by reganlives