Best way to clean injectors....literally (Redex need not apply)
Best way to clean injectors....literally (Redex need not apply)
EDIT: cheers for all the offers guys. All really handy <3
Shall I buy some cleaning solution and ship them off to one of you guys?
Been reading on pistonheads and it seems a few people recommend "Sea Clean" or some form of alcohol (Meth etc). I supposed deionised water or w/e may do the trick providing that they are primed with petrol again after?
EDIT: cheers for all the offers guys. All really handy <3
Shall I buy some cleaning solution and ship them off to one of you guys?
Dark Samurai Jim I have one if you send the injectors to me with a few beer tokens
your 12 thats illegal! lol
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
11-04-2018, 01:06 AM #12Dark Samurai Jim I have one if you send the injectors to me with a few beer tokens
your 12 thats illegal! lol
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
jimxms Been reading on pistonheads and it seems a few people recommend "Sea Clean" or some form of alcohol (Meth etc). I supposed deionised water or w/e may do the trick providing that they are primed with petrol again after?
Upto you mate, let me know
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
11-04-2018, 01:07 AM #13jimxms Been reading on pistonheads and it seems a few people recommend "Sea Clean" or some form of alcohol (Meth etc). I supposed deionised water or w/e may do the trick providing that they are primed with petrol again after?
Upto you mate, let me know
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Dark Samurai
11-04-2018, 01:08 AM #14I was joking about the beer tokens part but it would be cheaper to get them here to stavs wouldnt it?
![[Image: Old-Jamaica-Ginger-Beer-Can.gif]](http://foodsmartworld.com/wp-content/uploads/2011/04/Old-Jamaica-Ginger-Beer-Can.gif)
Sorted 
Dark Samurai
11-04-2018, 03:15 AM #16Yes mate. Its a metal bowl that vibrates so it should take chemicals
I used these people for mine: http://www.injectorcleaning.co.uk/
You want them cleaning with an ASNU system. These produce before and after results and also check the spray pattern etc is correct.
I used these people for mine: http://www.injectorcleaning.co.uk/
toxo You want them cleaning with an ASNU system. These produce before and after results and also check the spray pattern etc is correct.
I used these people for mine: http://www.injectorcleaning.co.uk/
Just came across a similar service on ebay as it goes. Expensive, but I suppose worth it if done properly.
Only other avenue I want to explore first is if I can source some 7MGTE injectors 'cheap' instead.
toxo You want them cleaning with an ASNU system. These produce before and after results and also check the spray pattern etc is correct.
I used these people for mine: http://www.injectorcleaning.co.uk/
Just came across a similar service on ebay as it goes. Expensive, but I suppose worth it if done properly.
Only other avenue I want to explore first is if I can source some 7MGTE injectors 'cheap' instead.
Mikey
Mikeydinho
19-04-2018, 01:16 AM #20Get them flow tested, they clean them and bring them back up to good as new, think mine was £50 to have them done. Also they can find any issues i.e if you have a bad injector. IMO its worth it dont cut cornors.
Mikey
8 Guest(s)
8 Guest(s)
Views 790
Last Post by