anyone got there arches rolled and photos and widest wheels you can fit 18" ???
anyone got there arches rolled and photos and widest wheels you can fit 18" ???
22-02-2018, 04:16 PM
danielson does his rub ???
Nope a little on the front but not a lot and it was only rubbing on the arch lining but it soon stops lol
Things done :- SPC turbo kit (custom), Blueflame cat back with custom tip, B&M shortshift, grooved discs all round, Mintex pads all round, OEM wheels in white,Denso ik22s, Calipers painted black,04 spec rear lights, Tein basic coilovers, Helix organic clutch, Fan washer jets, late spec headlights (dark), Carbon bonnet, Hotchkis anti roll bars, Front arm rest, Top box from late spec.
danielson does his rub ???
Nope a little on the front but not a lot and it was only rubbing on the arch lining but it soon stops lol
Things done :- SPC turbo kit (custom), Blueflame cat back with custom tip, B&M shortshift, grooved discs all round, Mintex pads all round, OEM wheels in white,Denso ik22s, Calipers painted black,04 spec rear lights, Tein basic coilovers, Helix organic clutch, Fan washer jets, late spec headlights (dark), Carbon bonnet, Hotchkis anti roll bars, Front arm rest, Top box from late spec.
19-05-2018, 01:41 AM
I ditched the front arch liners as I melted a hole in one lol, I've DIY rolled the arches all round and I dont rub, but do scrape my wishbones on the inside lip of the fronts on full lock and hard cornering at slow speeds, nothing some spacers cant sort though.
Im going to have my arches rolled so that flat lip on the arches disappears completley
Im also pretty low Id say compared with most on here so you shouldnt have any issues unless you slam the thing!
My advice would be 9's on the front 9.5/10's on the rear
![[Image: OJCSig.jpg]](http://i462.photobucket.com/albums/qq341/dh-all-the-way/OJCSig.jpg)
DanielWatts Banging 9.5J Wheels 'coz that's how you roll
Im running 18x9.5j et35 Rota Torque Drifts all round on mine.
I ditched the front arch liners as I melted a hole in one lol, I've DIY rolled the arches all round and I dont rub, but do scrape my wishbones on the inside lip of the fronts on full lock and hard cornering at slow speeds, nothing some spacers cant sort though.
Im going to have my arches rolled so that flat lip on the arches disappears completley
Im also pretty low Id say compared with most on here so you shouldnt have any issues unless you slam the thing!
My advice would be 9's on the front 9.5/10's on the rear
DanielWatts Banging 9.5J Wheels 'coz that's how you roll
03-07-2018, 06:40 AM
bounty` Im running 18x9.5j et35 Rota Torque Drifts all round on mine.
I ditched the front arch liners as I melted a hole in one lol, I've DIY rolled the arches all round and I dont rub, but do scrape my wishbones on the inside lip of the fronts on full lock and hard cornering at slow speeds, nothing some spacers cant sort though.
Im going to have my arches rolled so that flat lip on the arches disappears completley
Im also pretty low Id say compared with most on here so you shouldnt have any issues unless you slam the thing!
My advice would be 9's on the front 9.5/10's on the rear
Going back to a subject I brought up aaages ago, I was looking at getting some Rota Torques months ago.
I used the wheel fitment guide from the my.is site to create a spreadsheet that works out all the possible fitment issues for me.
And it says that I can fit a 18x8.5 et48 with 5mm spacers front and rear with no issues at all. (my car isn't lowered below standard, although its a sport model and I'd just be refitting my 225 tyres on them)
Would you say this is correct that I could do that with no rolling, arch liner mods etc?
EDIT: Meant 18x8.5, not 18x8
Edited 14-08-2011, 04:17 PM by sprinter2012.
sprinter2012
03-07-2018, 06:40 AM #35bounty` Im running 18x9.5j et35 Rota Torque Drifts all round on mine.
I ditched the front arch liners as I melted a hole in one lol, I've DIY rolled the arches all round and I dont rub, but do scrape my wishbones on the inside lip of the fronts on full lock and hard cornering at slow speeds, nothing some spacers cant sort though.
Im going to have my arches rolled so that flat lip on the arches disappears completley
Im also pretty low Id say compared with most on here so you shouldnt have any issues unless you slam the thing!
My advice would be 9's on the front 9.5/10's on the rear
Going back to a subject I brought up aaages ago, I was looking at getting some Rota Torques months ago.
I used the wheel fitment guide from the my.is site to create a spreadsheet that works out all the possible fitment issues for me.
And it says that I can fit a 18x8.5 et48 with 5mm spacers front and rear with no issues at all. (my car isn't lowered below standard, although its a sport model and I'd just be refitting my 225 tyres on them)
Would you say this is correct that I could do that with no rolling, arch liner mods etc?
EDIT: Meant 18x8.5, not 18x8
03-07-2018, 06:58 AM
sprinter2012
03-07-2018, 06:58 AM #36Ignore my above post, I found my original thread from when I first asked and I'd already decided the maximum for the front was 8", although I could go a fair bit wider on the rear but decided to also just stick with 8" on the back as I'm not running big power, and it means I can rotate the wheels
Recently Browsing
4 Guest(s)
4 Guest(s)
Recently Browsing
4 Guest(s)
4 Guest(s)
Related Threads…
Replies 7
Views 632
Views 632
26-02-2018, 01:32 AM
Last Post byFirebirdPhil
Last Post by
Replies 34
Views 1,620
Views 1,620
27-07-2017, 07:33 AM
Last Post byreganlives
Last Post by
Replies 2
Views 360
Views 360
14-06-2017, 02:33 PM
Last Post byormi
Last Post by
Replies 6
Views 540
Views 540
09-06-2017, 12:39 AM
Last Post byLexusrob
Last Post by