Intake Temp sensor and breather on aftermarket KIT
Intake Temp sensor and breather on aftermarket KIT
22-05-2018, 03:35 PM
I am trying to do my own intake(I got the 3 inch 90 and 45 degrees, the airfilter and the pipe) but I was just wondering where should I stick the brether pipe and the intake sensor...or HOW? I am thinking makig a whole in the intake hose and get it in there but what about the breather?
Any pics would be great.
Cheers.
Mercer
Hi all,
I am trying to do my own intake(I got the 3 inch 90 and 45 degrees, the airfilter and the pipe) but I was just wondering where should I stick the brether pipe and the intake sensor...or HOW? I am thinking makig a whole in the intake hose and get it in there but what about the breather?
Any pics would be great.
Cheers.
Mercer
22-05-2018, 11:57 PM
If you were for example to go from the 2.75" pipe up to a 3" pipe, the MAF reading would be incorrect and you'd get an engine check light and the car would run like a pig.
If its anything like the IS300, the MAF sensor is best kept in the same if possible. However, whats FAR more important is that the diameter of the intake pipe is kept the same.
If you were for example to go from the 2.75" pipe up to a 3" pipe, the MAF reading would be incorrect and you'd get an engine check light and the car would run like a pig.
23-05-2018, 04:00 AM
It can be mounted anywhere along the intake, you can just make a hole in the silicone pipe and push it in.
as for the breather, if your still Normally aspirated just put one of the small filters you can get off the likes of Ebay.
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
23-05-2018, 04:00 AM #4Its just a temp sensor mate not a pressure or flow sensor (hence thread title changed)
It can be mounted anywhere along the intake, you can just make a hole in the silicone pipe and push it in.
as for the breather, if your still Normally aspirated just put one of the small filters you can get off the likes of Ebay.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
23-05-2018, 04:05 AM
Sparkystav as for the breather, if your still Normally aspirated just put one of the small filters you can get off the likes of Ebay.
What difference dose it make if you are N/A or not for the small filters ???????????
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Sparkystav as for the breather, if your still Normally aspirated just put one of the small filters you can get off the likes of Ebay.
What difference dose it make if you are N/A or not for the small filters ???????????
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
23-05-2018, 04:16 AM
Sparkystav Its just a temp sensor mate not a pressure or flow sensor (hence thread title changed)
It can be mounted anywhere along the intake, you can just make a hole in the silicone pipe and push it in.
as for the breather, if your still Normally aspirated just put one of the small filters you can get off the likes of Ebay.
Cheers mate. Much appreciated. I will see if I can actually get a catch can with a breather on top.
Sparkystav Its just a temp sensor mate not a pressure or flow sensor (hence thread title changed)
It can be mounted anywhere along the intake, you can just make a hole in the silicone pipe and push it in.
as for the breather, if your still Normally aspirated just put one of the small filters you can get off the likes of Ebay.
Cheers mate. Much appreciated. I will see if I can actually get a catch can with a breather on top.
23-05-2018, 05:22 AM
Moley What difference dose it make if you are N/A or not for the small filters ???????????
With a boosted engine, the boost pressure can push (small amounts of) oil out through this breather, and you might want to consider an oil catch can. See Jim's thread "Catch me if you can" for more info on this. With no turbo/supercharger this should not occur and so a small filter is all that is needed.
![[Image: tempsig2.jpg]](http://i121.photobucket.com/albums/o227/84stoney/tempsig2.jpg)
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:Moley What difference dose it make if you are N/A or not for the small filters ???????????
With a boosted engine, the boost pressure can push (small amounts of) oil out through this breather, and you might want to consider an oil catch can. See Jim's thread "Catch me if you can" for more info on this. With no turbo/supercharger this should not occur and so a small filter is all that is needed.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:
23-05-2018, 05:23 AM
hawk77ojc Cheers mate. Much appreciated. I will see if I can actually get a catch can with a breather on top.
Not sure there is any point in a catch can without a charger? Other than engine bay bling. What do you think it would catch? Any ideas Stav?
Edited 04-07-2011, 02:58 PM by Stoney.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:hawk77ojc Cheers mate. Much appreciated. I will see if I can actually get a catch can with a breather on top.
Not sure there is any point in a catch can without a charger? Other than engine bay bling. What do you think it would catch? Any ideas Stav?
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:
23-05-2018, 08:22 AM
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
23-05-2018, 08:22 AM #10Just bling mate.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Recently Browsing
4 Guest(s)
4 Guest(s)
Recently Browsing
4 Guest(s)
4 Guest(s)
Related Threads…
Replies 5
Views 291
Views 291
13-12-2020, 12:59 AM
Last Post byRabster
Last Post by
Replies 6
Views 914
Views 914
12-03-2018, 08:04 AM
Last Post byjimxms
Last Post by