Coilovers and equal ride height
Coilovers and equal ride height
The coilovers were set to equal gap before they were put on, the question is how do i get equal height?, do i adjust the coilover gap to different height settings or adjust the spring tension adjuster to set equal height? how have you guys equal your ride height?
Coils were fitted by Charlesworth motors a while back..
Ta
A question for those with coilovers, On my IS i have the BC Racing coilovers, have noticed that the ride height is not equal, drivers side front is slightly higher than the passenger front, and drivers side rear is lower than the passenger rear, (I noticed the same when i had the lowering springs on) :blink:
The coilovers were set to equal gap before they were put on, the question is how do i get equal height?, do i adjust the coilover gap to different height settings or adjust the spring tension adjuster to set equal height? how have you guys equal your ride height?
Coils were fitted by Charlesworth motors a while back..
Ta
start at the first thread at the bottom then count up to the locking nut lets say your drivers one is 15 threads and the passengers one is 20 threads that means you need to wind the locking nut up 5 threads job done now your car will be even..
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
count the threads on the coil over..
start at the first thread at the bottom then count up to the locking nut lets say your drivers one is 15 threads and the passengers one is 20 threads that means you need to wind the locking nut up 5 threads job done now your car will be even..
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
thanks, wanted to make sure that it's ok drive if the coilovers are set different heights, "only slightyly tho" Going to sort it out over weekend hopefully, and get the spacers on, hoping to get photos up soon, just few things to finish up first..
P.S Ormi your car is hust tooooooooooooooooo SLYCK :drool:
I was waiting for Ormi's input thanks, wanted to make sure that it's ok drive if the coilovers are set different heights, "only slightyly tho"
Going to sort it out over weekend hopefully, and get the spacers on, hoping to get photos up soon, just few things to finish up first..
P.S Ormi your car is hust tooooooooooooooooo SLYCK :drool:
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
since whats been added?if you mean the spacers they only affect the track of the car ie the wheels will stick out further but it wont affect anything else..
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
1 Guest(s)
1 Guest(s)
Views 294
Last Post by
Views 1,554
Last Post by
Views 1,614
Last Post by