question???are decats any good??
question???are decats any good??
30-06-2018, 08:22 AM
you still got the same number?
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino
30-06-2018, 08:22 AM #31lol you have to earn priveledges :p only joking mate ill send you the pic by text you still got the same number?
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
![[Image: tempsig2.jpg]](http://i121.photobucket.com/albums/o227/84stoney/tempsig2.jpg)
ad: It was a tough call to make, but the Supercharged IS200 is being retired.
01-07-2018, 04:14 AM
question for jim, you got the toyo hp y pipe correct? if so has yours got an o2 hole in the y pipe as i didnt think it should have one, but mine does? so will need to get a bung to block the hole?
Attached Files
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino
01-07-2018, 04:14 AM #34i goy my y pipe today got a question though, is the over hang correct that it just slides into the back box end of the exhaust so to keep it tight?
question for jim, you got the toyo hp y pipe correct? if so has yours got an o2 hole in the y pipe as i didnt think it should have one, but mine does? so will need to get a bung to block the hole?
Attached Files
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
01-07-2018, 04:21 AM
is300_dino i goy my y pipe today got a question though, is the over hang correct that it just slides into the back box end of the exhaust so to keep it tight?
Yeppers
is300_dino question for jim, you got the toyo hp y pipe correct? if so has yours got an o2 hole in the y pipe as i didnt think it should have one, but mine does? so will need to get a bung to block the hole?
Yep, the IS300 has the last o2 sensor half way down the right-hand part of the Y (before it merges into one pipe).
My toyo one had 3 sensor holes...but thats another story lol.
is300_dino i goy my y pipe today got a question though, is the over hang correct that it just slides into the back box end of the exhaust so to keep it tight?
Yeppers
is300_dino question for jim, you got the toyo hp y pipe correct? if so has yours got an o2 hole in the y pipe as i didnt think it should have one, but mine does? so will need to get a bung to block the hole?
Yep, the IS300 has the last o2 sensor half way down the right-hand part of the Y (before it merges into one pipe).
My toyo one had 3 sensor holes...but thats another story lol.
01-07-2018, 04:41 AM
i have an afr gauge in the dash but as i didnt install it not sure where the sensor for it is located or shoud be moved to? have you got a rough idea?
cheers for your help mate i have been searching myis but theres so many threads im yet to get to the treasured info lol
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino
01-07-2018, 04:41 AM #36ok cool, yeah i knew that the sensor was located in the y pipe had to replace it about 2 years ago when it went funny, will find some bungs to cap B1s2 and B2s2, and the other 2 sensors should just screw in and work properly is that correct??
i have an afr gauge in the dash but as i didnt install it not sure where the sensor for it is located or shoud be moved to? have you got a rough idea?
cheers for your help mate i have been searching myis but theres so many threads im yet to get to the treasured info lol
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
01-07-2018, 05:06 AM
is300_dino ok cool, yeah i knew that the sensor was located in the y pipe had to replace it about 2 years ago when it went funny, will find some bungs to cap B1s2 and B2s2, and the other 2 sensors should just screw in and work properly is that correct??
Yeppers
is300_dino i have an afr gauge in the dash but as i didnt install it not sure where the sensor for it is located or shoud be moved to? have you got a rough idea?
cheers for your help mate i have been searching myis but theres so many threads im yet to get to the treasured info lol
Hmm so you had an AFR installed by someone, but you're not sure where they put the sensor?
Could it be that its a narrowband gauge and is taking its reading by piggybacking the signal from one of the existing OEM sensors?
If its definitely a wideband then I'd expect that they would have installed it somewhere in the downpipe, as anywhere else would have been a lot of hassle to get to.
is300_dino ok cool, yeah i knew that the sensor was located in the y pipe had to replace it about 2 years ago when it went funny, will find some bungs to cap B1s2 and B2s2, and the other 2 sensors should just screw in and work properly is that correct??
Yeppers
is300_dino i have an afr gauge in the dash but as i didnt install it not sure where the sensor for it is located or shoud be moved to? have you got a rough idea?
cheers for your help mate i have been searching myis but theres so many threads im yet to get to the treasured info lol
Hmm so you had an AFR installed by someone, but you're not sure where they put the sensor?
Could it be that its a narrowband gauge and is taking its reading by piggybacking the signal from one of the existing OEM sensors?
If its definitely a wideband then I'd expect that they would have installed it somewhere in the downpipe, as anywhere else would have been a lot of hassle to get to.
01-07-2018, 05:13 AM
toxo AFRs need to go as close to the header merge as possible. So they are getting readings from all 6 cylinders, but the air's still hot.
Its a tough one, because until the Y pipe merges, you will only be reading from 3 cylinders.
I've got mine installed directly at the point where the Y merges so I get a reading from all cylinders. Its quite far down the pipe, so probably lags a little behind and has a slight loss of resolution. But its good enough to be an early warning system for serious tuning issues imo.
toxo AFRs need to go as close to the header merge as possible. So they are getting readings from all 6 cylinders, but the air's still hot.
Its a tough one, because until the Y pipe merges, you will only be reading from 3 cylinders.
I've got mine installed directly at the point where the Y merges so I get a reading from all cylinders. Its quite far down the pipe, so probably lags a little behind and has a slight loss of resolution. But its good enough to be an early warning system for serious tuning issues imo.
01-07-2018, 05:22 AM
these ones http://www.acautotechnic.com/product_inf...cts_id=262
Edited 12-08-2011, 03:00 PM by is300_dino.
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino
01-07-2018, 05:22 AM #40i have ac autotechics gauges if that helps lol
these ones http://www.acautotechnic.com/product_inf...cts_id=262
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
Recently Browsing
5 Guest(s)
5 Guest(s)
Recently Browsing
5 Guest(s)
5 Guest(s)
Related Threads…
Replies 2
Views 184
Views 184
20-02-2020, 09:33 AM
Last Post bylex2oos
Last Post by
Replies 3
Views 288
Views 288
08-09-2019, 02:59 AM
Last Post byMKT222
Last Post by
Replies 1
Views 232
Views 232
09-07-2019, 01:43 AM
Last Post bySparkystav
Last Post by
Replies 38
Views 1,996
Views 1,996
24-02-2019, 02:21 AM
Last Post byjay_russell
Last Post by
Replies 6
Views 412
Views 412
21-12-2018, 12:36 PM
Last Post byis300_dino
Last Post by
Replies 47
Views 2,005
Views 2,005
10-11-2018, 09:44 PM
Last Post byjay_russell
Last Post by