TTE Supercharger Install Help!
TTE Supercharger Install Help!
it completely slipped my mind to take a photo
oooh oooh
speak to aj get him to open his ecu box up as i left a small snipet of cable on the sensor wire in the car so he can identify the wire this way mate
if memory serves the 2 wires for the ecu will produce a resistance AFAIK so i would check this 1st using a multimeter
it completely slipped my mind to take a photo
oooh oooh
speak to aj get him to open his ecu box up as i left a small snipet of cable on the sensor wire in the car so he can identify the wire this way mate
![[Image: downloadje.jpg]](http://imageshack.us/photo/my-images/228/downloadje.jpg/)
![[Image: download1b.jpg]](http://imageshack.us/photo/my-images/220/download1b.jpg/)
Uploaded with ImageShack.us
these are the pics aj sent so power is same as the fcd
brown signal wire went into the ecu green with yellow strip
the red with yellow strip went in to the ecu , just about can see is it green with red strip
![[Image: 46032_548210708527052_942106859_n.jpg]](https://sphotos-d.ak.fbcdn.net/hphotos-ak-ash3/p206x206/46032_548210708527052_942106859_n.jpg)
lookatmybiceps
07-07-2018, 10:35 PM #22
Uploaded with ImageShack.us
these are the pics aj sent so power is same as the fcd
brown signal wire went into the ecu green with yellow strip
the red with yellow strip went in to the ecu , just about can see is it green with red strip
Bandit I got a clutch conversion kit from Gord for mine, not sure if he can still get them but might be worth asking? :thumbup1: at the moment i have a home made induction kit fitted with Apexi filter :thumbup1:
the clutch adaptor is from a RAV4 so you can get one from any dealer - they need to look on the parts fiche for it. you will need a T-piece and about 40cm of brake fluid resistant tubing.
Bandit I got a clutch conversion kit from Gord for mine, not sure if he can still get them but might be worth asking? :thumbup1: at the moment i have a home made induction kit fitted with Apexi filter :thumbup1:
the clutch adaptor is from a RAV4 so you can get one from any dealer - they need to look on the parts fiche for it. you will need a T-piece and about 40cm of brake fluid resistant tubing.
lookatmybiceps
09-07-2018, 02:21 AM #25ok just installed it, it kicking out a lot of black smoke and when i turn the engine cuts out and its runing very lumpy it it guna be the chip, not wired right, but there is no ecu light on?
lookatmybiceps
09-07-2018, 04:19 AM #28ah it ok i got a wire wrong seams to run better now will go for a drive to see
lookatmybiceps
09-07-2018, 05:56 AM #30went for a run the pipe was close to the air con pump scuffed a bit and i think i hit fuel cut, as i floored it in 3gear as speed was picking up it made a woosh sound and it was like i slamed the brakes on for a second, is the chip still not wired right it seems fine apart from this, i conected the 2 senor wires to blue with yellow strip on the ecu and there are 2 wires this color and im prety sure thats how aj had it wired looking at the pics
6 Guest(s)
6 Guest(s)
Views 1,867
Last Post by
Views 723
Last Post by
Views 472
Last Post by
Views 938
Last Post by
Views 112
Last Post by
Views 86
Last Post by
Views 415
Last Post by
Views 427
Last Post by