Manifold lambda
Manifold lambda
Jimbob-T-Lex
10-07-2018, 01:16 AM #1What I've done is got hold of a stainless manifold and fitted then gone to put sensors back in and the rear one there is not enough room to get it in not without some major fabrication so I blanked it and wired the rear wiring so all comes off front sensor. Fine for a while then light came on if I unplug and reset codes with obd it shows all fine and sensors working fine but if I turn off and start again they dnt work! Anyone got any ideas what to do????
you should be able to get the sensor back in ?
what about fitting it then fitting the manifold ?
have you got a pic of the offending location
you should be able to get the sensor back in ?
what about fitting it then fitting the manifold ?
Jimbob-T-Lex
10-07-2018, 01:29 AM #3I tried all mate there is no room just hits the bulk head basically a badly designed manifold unless I get the sensor fixing moved or reshape my bulk head then Im gonna have to wire rear into the front just weird how it works but if I turn off and start her up again it stops and I get engine check light
I.e not in bank 2 but in bank 1 ?
something dont sound right as when i had my manifold i wired both sensors into one input and it worked fine it have you tried plugging into the other sensor location ?
I.e not in bank 2 but in bank 1 ?
Jimbob-T-Lex
10-07-2018, 01:34 AM #5What I've done is I've bank 1 sensor fitted and plugged in and works fine then I wired from bank 1 sensor into where the bank 2 sensor connects, do you know what the black wires are I could have them wrong way round as there is two
![[Image: 004-8.jpg]](http://i1197.photobucket.com/albums/aa435/jimbob150385/004-8.jpg)
![[Image: 005-6.jpg]](http://i1197.photobucket.com/albums/aa435/jimbob150385/005-6.jpg)
Jimbob-T-Lex
10-07-2018, 01:44 AM #7Just googled and the black cables are heaters do i need to connect them as no sensor is actually there
1 Guest(s)
1 Guest(s)
Views 1,996
Last Post by
Views 929
Last Post by
Views 446
Last Post by
Views 577
Last Post by
Views 769
Last Post by
Views 710
Last Post by