Little write up on the evolution of my car
Little write up on the evolution of my car
Bonney Liking this car a lot, Getting itchy fingers now and want to sart going mad on mine :w00t:
Lexuspat very impressive stav as always.
how you did those headlights is amazing
Thanks lads, lots of hard work goes into it.
Stoney I've been waiting for you to finish those headlights for ages mate! Looking very good now it's done. I want it!
Well get on with some yourself now! just take your time and it'll work
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
22-07-2018, 11:14 AM #581Bonney Liking this car a lot, Getting itchy fingers now and want to sart going mad on mine :w00t:
Lexuspat very impressive stav as always.
how you did those headlights is amazing
Thanks lads, lots of hard work goes into it.
Stoney I've been waiting for you to finish those headlights for ages mate! Looking very good now it's done. I want it!
Well get on with some yourself now! just take your time and it'll work
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav Right the arches are fitted (i dont hang around when i have free time lol)
here are a few pics for your consideration:
The best pic
I do love them, but i *may* need a tad wider rims, ive got 8J on at the moment, may go to a 8.5. But need to do something with the rear first so i can put something like 9.5 on the back.
then find some rims that i like
![[Image: Arches1.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/Arches1.jpg)
![[Image: Arches6.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/Arches6.jpg)
![[Image: Arches5.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/Arches5.jpg)
![[Image: Arches4.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/Arches4.jpg)
![[Image: Arches3.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/Arches3.jpg)
![[Image: Arches2.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/Arches2.jpg)
Not bad mate, looks nice. Now you need a nice set of JDM rims
LEXUS IS200 - The most fun car to go sideways
Sparkystav Right the arches are fitted (i dont hang around when i have free time lol)
here are a few pics for your consideration:
The best pic
I do love them, but i *may* need a tad wider rims, ive got 8J on at the moment, may go to a 8.5. But need to do something with the rear first so i can put something like 9.5 on the back.
then find some rims that i like
Not bad mate, looks nice. Now you need a nice set of JDM rims
LEXUS IS200 - The most fun car to go sideways
First i finished off fitting the kill swtch properly.
If you just cut off the battery, the car will keep running from the alternator, so the proper kill switches have more contacts on the bottom, one grounds the power cable when you remove the key, the other breaks the power to the ECU killing the engine. Bit fiddly to work out but all working now.
Then i fitted the solenoid for my purge spray for the CO2, and wired in the front button on the steering wheel to power it. Havent decided where to fit it yet though so not completed the pipework, just blanked it off.
Another job was something ive wanted to do for a while. I love the look of the GReddy intercoolers:
![[Image: 600.jpg]](http://www.greddy.com/upload/img/600.jpg)
So i decided to make my own type:
![[Image: IMG_1071.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/Mods/IMG_1071.jpg)
![[Image: IMG_1072.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/Mods/IMG_1072.jpg)
I used the Alexis font so it matches the car. Wrote the word out on Word, printed it on A3, then cut it all out carefully, laid the intercooler down and sprayed it. Got it all over my fingers as i had to hold the middle bits of the "B" and "O" down lol. But overall i like the outcome, think it goes well. (You'll also notice the yellow bit in the headlight, thats to stop rain etc getting in, and i remove it when the weathers good, or im going to boot it lol)
Also finally fitted the sender for my fuel pressure gauge but need to figure out the settings before itll read accurately.
Just to clean it now for JAE.
On a side note, been working on a project for the indicators, but more on that when the parts arrive. Also been getting all the bits together for a return fuel line ready for the winter mods. And a trick mod for the steering wheel but LOTS of work to go into that yet so no more info.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
23-07-2018, 11:14 AM #583Well another day spent fettling on the car.
First i finished off fitting the kill swtch properly.
If you just cut off the battery, the car will keep running from the alternator, so the proper kill switches have more contacts on the bottom, one grounds the power cable when you remove the key, the other breaks the power to the ECU killing the engine. Bit fiddly to work out but all working now.
Then i fitted the solenoid for my purge spray for the CO2, and wired in the front button on the steering wheel to power it. Havent decided where to fit it yet though so not completed the pipework, just blanked it off.
Another job was something ive wanted to do for a while. I love the look of the GReddy intercoolers:
So i decided to make my own type:
I used the Alexis font so it matches the car. Wrote the word out on Word, printed it on A3, then cut it all out carefully, laid the intercooler down and sprayed it. Got it all over my fingers as i had to hold the middle bits of the "B" and "O" down lol. But overall i like the outcome, think it goes well. (You'll also notice the yellow bit in the headlight, thats to stop rain etc getting in, and i remove it when the weathers good, or im going to boot it lol)
Also finally fitted the sender for my fuel pressure gauge but need to figure out the settings before itll read accurately.
Just to clean it now for JAE.
On a side note, been working on a project for the indicators, but more on that when the parts arrive. Also been getting all the bits together for a return fuel line ready for the winter mods. And a trick mod for the steering wheel but LOTS of work to go into that yet so no more info.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
And I did wonder about covering up the headlight vent in bad weather, but you read my mind. lol
What do you mean 'the font matches the car' though? Is Alexis the font the Lexus badges are written in?
sprinter2012
23-07-2018, 11:35 AM #584Love the custom graphic on the intercooler, getting very creative now :thumbup:
And I did wonder about covering up the headlight vent in bad weather, but you read my mind. lol
What do you mean 'the font matches the car' though? Is Alexis the font the Lexus badges are written in?
sprinter2012 What do you mean 'the font matches the car' though? Is Alexis the font the Lexus badges are written in?
Yes mate
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
23-07-2018, 11:40 AM #585sprinter2012 What do you mean 'the font matches the car' though? Is Alexis the font the Lexus badges are written in?
Yes mate
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
![[Image: Capture-2.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/Capture-2.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
23-07-2018, 11:42 AM #586Here you go:
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
EDIT: Niiice, I'll definitely find a use for that font in my Photoshopping
sprinter2012
23-07-2018, 11:42 AM #587Awesome, now I can use the correct font on my car PCs wallpaper
EDIT: Niiice, I'll definitely find a use for that font in my Photoshopping
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino
23-07-2018, 12:08 PM #588looks good mate, i've thought of an idea, the yellow block on the light could you replace it with a modified butterfly plate from a throttle body for example and have a switch to pull it open and close it from the cabin?
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
![[Image: tempsig2.jpg]](http://i121.photobucket.com/albums/o227/84stoney/tempsig2.jpg)
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:Looking great mate. I am tempted to do something with my intercooler, but I have a lot to do in a very little time and might end up just doing it black (want to do it tomorrow if I get time, and have no printer access etc!) Was thinking TTE masked off and then then rest done thing black? I guess I could always chrome spray it over the top at a later date, or get a bigger intercooler and do that one? You've got me thinking now Stav, darn you! I have more important things to be concentrating on!
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:is300_dino looks good mate, i've thought of an idea, the yellow block on the light could you replace it with a modified butterfly plate from a throttle body for example and have a switch to pull it open and close it from the cabin?
I like that idea, but its a massive amount of effort that quite frankly i cant be bothered with lol.
Stoney Looking great mate. I am tempted to do something with my intercooler, but I have a lot to do in a very little time and might end up just doing it black (want to do it tomorrow if I get time, and have no printer access etc!) Was thinking TTE masked off and then then rest done thing black? I guess I could always chrome spray it over the top at a later date, or get a bigger intercooler and do that one? You've got me thinking now Stav, darn you! I have more important things to be concentrating on!
LOL sorry mate, but its a slippery slope
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
23-07-2018, 12:35 PM #590is300_dino looks good mate, i've thought of an idea, the yellow block on the light could you replace it with a modified butterfly plate from a throttle body for example and have a switch to pull it open and close it from the cabin?
I like that idea, but its a massive amount of effort that quite frankly i cant be bothered with lol.
Stoney Looking great mate. I am tempted to do something with my intercooler, but I have a lot to do in a very little time and might end up just doing it black (want to do it tomorrow if I get time, and have no printer access etc!) Was thinking TTE masked off and then then rest done thing black? I guess I could always chrome spray it over the top at a later date, or get a bigger intercooler and do that one? You've got me thinking now Stav, darn you! I have more important things to be concentrating on!
LOL sorry mate, but its a slippery slope
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
7 Guest(s)
7 Guest(s)
Views 283
Last Post by