JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Horns/ hooters

Horns/ hooters

Horns/ hooters

Pages (2): Previous 1 2
Kevpr
Senior Member
379
08-08-2018, 04:34 AM
#11
I've been tempted to get a cheap train horn as an additional horn just to tell off everyone that cuts me up.
Kevpr
08-08-2018, 04:34 AM #11

I've been tempted to get a cheap train horn as an additional horn just to tell off everyone that cuts me up.

Stoney
Posting Freak
2,117
08-08-2018, 05:50 AM
#12
Many many members relocate them to behind the crash bar. There is a full guide in the workshop section I believe.

EDIT: HERE -----> http://www.outlawjapclub.co.uk/forum/sho...d.php?t=23

t_sport190 I did read somewhere someone wasnt happy with the sound of original ones, i not have problem with it though, do i need to remove or extend wires just to lower it to bumper/crash bar level ?

No, stock wiring should be long enough to move them. 5 minute job.
Edited 19-09-2011, 03:29 PM by Stoney.

[Image: tempsig2.jpg]
Confusedad: It was a tough call to make, but the Supercharged IS200 is being retired. Confusedad:
Stoney
08-08-2018, 05:50 AM #12

Many many members relocate them to behind the crash bar. There is a full guide in the workshop section I believe.

EDIT: HERE -----> http://www.outlawjapclub.co.uk/forum/sho...d.php?t=23

t_sport190 I did read somewhere someone wasnt happy with the sound of original ones, i not have problem with it though, do i need to remove or extend wires just to lower it to bumper/crash bar level ?

No, stock wiring should be long enough to move them. 5 minute job.


[Image: tempsig2.jpg]
Confusedad: It was a tough call to make, but the Supercharged IS200 is being retired. Confusedad:

t_sport190
Junior Member
15
08-08-2018, 11:11 AM
#13
Stoney Many many members relocate them to behind the crash bar. There is a full guide in the workshop section I believe.

EDIT: HERE -----> http://www.outlawjapclub.co.uk/forum/sho...d.php?t=23



No, stock wiring should be long enough to move them. 5 minute job.

Thanks ! just had quick read through that topic Smile looks simple to do! need to check if i got that guard in the way like a member posted there, i got plenty those M6 bolts, so failing that i quite like idea of painting them, i knw the latter shows up more but at least it look better than not painted on the OEM !
t_sport190
08-08-2018, 11:11 AM #13

Stoney Many many members relocate them to behind the crash bar. There is a full guide in the workshop section I believe.

EDIT: HERE -----> http://www.outlawjapclub.co.uk/forum/sho...d.php?t=23



No, stock wiring should be long enough to move them. 5 minute job.

Thanks ! just had quick read through that topic Smile looks simple to do! need to check if i got that guard in the way like a member posted there, i got plenty those M6 bolts, so failing that i quite like idea of painting them, i knw the latter shows up more but at least it look better than not painted on the OEM !

Bonney
Member
104
11-08-2018, 08:53 AM
#14
Think I have one in the shed that I might use, Its one of the old style ones that go AAAAOOOOOOOOOOOOOOOOOOOGGGAAAAAAAAAHHHHHHHHH!
Bonney
11-08-2018, 08:53 AM #14

Think I have one in the shed that I might use, Its one of the old style ones that go AAAAOOOOOOOOOOOOOOOOOOOGGGAAAAAAAAAHHHHHHHHH!

sprinter2012
Posting Freak
2,484
11-08-2018, 11:47 AM
#15
Bonney Think I have one in the shed that I might use, Its one of the old style ones that go AAAAOOOOOOOOOOOOOOOOOOOGGGAAAAAAAAAHHHHHHHHH!

Fast forward to 1:00....like that? Wink

[youtube]36JytcIvhX4[/youtube]
sprinter2012
11-08-2018, 11:47 AM #15

Bonney Think I have one in the shed that I might use, Its one of the old style ones that go AAAAOOOOOOOOOOOOOOOOOOOGGGAAAAAAAAAHHHHHHHHH!

Fast forward to 1:00....like that? Wink

[youtube]36JytcIvhX4[/youtube]

Pages (2): Previous 1 2
Recently Browsing
 4 Guest(s)
Recently Browsing
 4 Guest(s)