DIY Supercharger Issue
DIY Supercharger Issue
i may use a custon cradle,maybe just a baseplate with outlet incorporated into it,so that the charger can just bolt on/off,i will use the same bolt holes though in the block.
buzzard2011
11-08-2018, 09:31 AM #41haha yeah,i think ill have my hands full with my own,but i will try and log everything as i go and share the info with you,yes using the merc m62 charger,not going to use the clutch though,ill lock that off.
i may use a custon cradle,maybe just a baseplate with outlet incorporated into it,so that the charger can just bolt on/off,i will use the same bolt holes though in the block.
![[Image: image002-5.jpg]](http://i486.photobucket.com/albums/rr223/P881NGU/image002-5.jpg)
Jimbob-T-Lex
11-08-2018, 09:55 AM #43yeah i can imagine you will be busy with yours lol yeah if you could keep posting so i can follow ive just rang about and a mate has agreed to fabricate the cradle for me so whats the diff with locking it off or not mate ?? ive got the charger, intercooler, pipework and a greddy ultimate so far
and to pingu dont know as yet mate havnt finished,but im guessing @ 500 ish ish lol.
just picked up a merc charger for 150 only done 500 miles nearly new:drool:
happy boosting all.
buzzard2011
11-08-2018, 10:16 AM #44****** hell you've got more bits than me so far haha. the merc charger has a clutch that's operated by the ecu,you have to take the front plate of and bolt it all together,ithink theres a thread on here somewhere not too difficult just make sure all your bolts are the same or you will end up with a very unsteady blower.
and to pingu dont know as yet mate havnt finished,but im guessing @ 500 ish ish lol.
just picked up a merc charger for 150 only done 500 miles nearly new:drool:
happy boosting all.
Jimbob-T-Lex
11-08-2018, 10:23 AM #45lol yeah but getting it all together to work is gonna be the fun part im off to america for 2 months so you should end up beating me to a finished product lol
jimbob150385 ive got the charger, intercooler, pipework and a greddy ultimate so far
Are you going to fit and map the Ultimate to run it? As you know this is not required?
buzzard2011 and to pingu dont know as yet mate havnt finished,but im guessing @ 500 ish ish lol.
just picked up a merc charger for 150 only done 500 miles nearly new:drool:
happy boosting all.
To get the kit and fit it for £500 amazing! Though it is a hell of a lot of work for you. I don't envy you fabricating that cradle! It took me long enough to fit my cradle and charger and get everything lined up so as the bolts went in, and mine is the TTE one designed specifically to fit! I know when others have priced this up they have come to £2k+ but that is mainly due to paying for all the custom fabrication, if you can do that yourself you will be quids in.
My charger had a few miles on it, but I opened it up, striped and rebuilt it and now it is like new, with no scoring at all on the inside. That rotorpack is like mechanical porn!
Best of luck to both of you with your installations.
![[Image: tempsig2.jpg]](http://i121.photobucket.com/albums/o227/84stoney/tempsig2.jpg)
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:jimbob150385 ive got the charger, intercooler, pipework and a greddy ultimate so far
Are you going to fit and map the Ultimate to run it? As you know this is not required?
buzzard2011 and to pingu dont know as yet mate havnt finished,but im guessing @ 500 ish ish lol.
just picked up a merc charger for 150 only done 500 miles nearly new:drool:
happy boosting all.
To get the kit and fit it for £500 amazing! Though it is a hell of a lot of work for you. I don't envy you fabricating that cradle! It took me long enough to fit my cradle and charger and get everything lined up so as the bolts went in, and mine is the TTE one designed specifically to fit! I know when others have priced this up they have come to £2k+ but that is mainly due to paying for all the custom fabrication, if you can do that yourself you will be quids in.
My charger had a few miles on it, but I opened it up, striped and rebuilt it and now it is like new, with no scoring at all on the inside. That rotorpack is like mechanical porn!
Best of luck to both of you with your installations.
ad: It was a tough call to make, but the Supercharged IS200 is being retired. ad:yes a lot of work but not too bad,(im saying that now) just been out and had a quick measure under the heat sheild,might incorporate the brackets on the 3 bolt holes there,not sure yet,pipe work and manifolds are going to be a pain right enough.gonna be a fcd of some kind.cant shell out for the greddy...gonna get a slim line intercooler as well me thinks,but not this month,skint already and just got paid haha,poxy tax man,:Chair:
fitting a induction kit at the mo will post up later..if it works:blink:
buzzard2011
12-08-2018, 02:42 AM #48thanks stoney,
yes a lot of work but not too bad,(im saying that now) just been out and had a quick measure under the heat sheild,might incorporate the brackets on the 3 bolt holes there,not sure yet,pipe work and manifolds are going to be a pain right enough.gonna be a fcd of some kind.cant shell out for the greddy...gonna get a slim line intercooler as well me thinks,but not this month,skint already and just got paid haha,poxy tax man,:Chair:
fitting a induction kit at the mo will post up later..if it works:blink:
buzzard2011 the merc charger has a clutch that's operated by the ecu,you have to take the front plate of and bolt it all together,ithink theres a thread on here somewhere not too difficult just make sure all your bolts are the same or you will end up with a very unsteady blower.The best way of bolting it together is giving it 12V
If you prefer you can run it through a switch on the dashboard as well.[youtube]ZQ15TteeYiU[/youtube]
P.Lindblom
12-08-2018, 03:53 AM #49buzzard2011 the merc charger has a clutch that's operated by the ecu,you have to take the front plate of and bolt it all together,ithink theres a thread on here somewhere not too difficult just make sure all your bolts are the same or you will end up with a very unsteady blower.The best way of bolting it together is giving it 12V
If you prefer you can run it through a switch on the dashboard as well.[youtube]ZQ15TteeYiU[/youtube]
my workload is increasing by the day though,my head is in blower overdrive at the mo lmao.
hock:
buzzard2011
12-08-2018, 06:05 AM #50hey thats the nuts haha,:thumbup:thanks for that tip,i may well toy around with that idea.
my workload is increasing by the day though,my head is in blower overdrive at the mo lmao.hock:
3 Guest(s)
3 Guest(s)
Views 1,834
Last Post by
Views 710
Last Post by
Views 468
Last Post by
Views 910
Last Post by
Views 110
Last Post by
Views 85
Last Post by
Views 406
Last Post by
Views 417
Last Post by