JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Modifications & Tuning changing bulb help

changing bulb help

changing bulb help

Pages (7): Previous 13 4 5 6 7 Next  
Lexuspat
Administrator
6,827
22-08-2018, 12:48 PM
#41
Hi dave sorry I never got back to u via ur PM I don't have any left but there are plenty of sets on ebay. And to answer ur question yes you do use the blue holders

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team
Lexuspat
22-08-2018, 12:48 PM #41

Hi dave sorry I never got back to u via ur PM I don't have any left but there are plenty of sets on ebay. And to answer ur question yes you do use the blue holders


[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team

davidjamesbattersby
Senior Member
428
22-08-2018, 12:50 PM
#42
its ok mate can you send me a link for the bulbs that i need, got blue smd ones so just need the littler ones now to get the dash sorted thanks for your help
davidjamesbattersby
22-08-2018, 12:50 PM #42

its ok mate can you send me a link for the bulbs that i need, got blue smd ones so just need the littler ones now to get the dash sorted thanks for your help

Lexuspat
Administrator
6,827
22-08-2018, 12:52 PM
#43
250812772694 here's a set of 10 mate can't link as I'm on my phone but that's the item number

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team
Lexuspat
22-08-2018, 12:52 PM #43

250812772694 here's a set of 10 mate can't link as I'm on my phone but that's the item number


[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team

sprinter2012
Posting Freak
2,484
22-08-2018, 12:53 PM
#44
If you've already got blue SMD for the bigger style (T10) then the eBay item listed below should finish it off...

2 X T5 BLUE SMD DASH BULB
sprinter2012
22-08-2018, 12:53 PM #44

If you've already got blue SMD for the bigger style (T10) then the eBay item listed below should finish it off...

2 X T5 BLUE SMD DASH BULB

davidjamesbattersby
Senior Member
428
22-08-2018, 12:56 PM
#45
but how do i fit those into the holders, do the bulbe come out
davidjamesbattersby
22-08-2018, 12:56 PM #45

but how do i fit those into the holders, do the bulbe come out

Lexuspat
Administrator
6,827
22-08-2018, 12:59 PM
#46
Yes mate the standard bulbs just pull out

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team
Lexuspat
22-08-2018, 12:59 PM #46

Yes mate the standard bulbs just pull out


[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team

davidjamesbattersby
Senior Member
428
22-08-2018, 01:00 PM
#47
il have to have another look, these type of bulbs are fitted to the heated seat switches and the trc/snow mode switch, does any one have any idea what sizes they are of the link
http://www.ebay.co.uk/itm/190581399297?s...1423.l2649
davidjamesbattersby
22-08-2018, 01:00 PM #47

il have to have another look, these type of bulbs are fitted to the heated seat switches and the trc/snow mode switch, does any one have any idea what sizes they are of the link
http://www.ebay.co.uk/itm/190581399297?s...1423.l2649

sprinter2012
Posting Freak
2,484
22-08-2018, 01:00 PM
#48
Just make sure the new bulbs are a tight fit by padding them with a bit of heat shrink (only if you need to) so they don't wiggle, otherwise you'll get a bad connection and they will burn out after a few weeks.
sprinter2012
22-08-2018, 01:00 PM #48

Just make sure the new bulbs are a tight fit by padding them with a bit of heat shrink (only if you need to) so they don't wiggle, otherwise you'll get a bad connection and they will burn out after a few weeks.

Lexuspat
Administrator
6,827
22-08-2018, 01:05 PM
#49
Agree with sprinter if the connection is bad they won't last

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team
Lexuspat
22-08-2018, 01:05 PM #49

Agree with sprinter if the connection is bad they won't last


[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team

davidjamesbattersby
Senior Member
428
22-08-2018, 01:18 PM
#50
what you mean heat shrink, where should i put that part
davidjamesbattersby
22-08-2018, 01:18 PM #50

what you mean heat shrink, where should i put that part

Pages (7): Previous 13 4 5 6 7 Next  
Recently Browsing
 2 Guest(s)
Recently Browsing
 2 Guest(s)
Related Threads…
Replies 5
Views 522
23-05-2017, 03:28 PM
Last Post by todd
Replies 0
Views 208
24-12-2016, 11:50 AM
Last Post by Andy-R.