JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Altezza emission issues

Altezza emission issues

Altezza emission issues

Pages (2): 1 2 Next
Kevpr
Senior Member
379
29-08-2018, 03:42 AM
#1
I had my MOT on Sat, all fine apart from a minor emissions problem.
CO2 is supposed to be 0.2 but mine was 3.8 ! :blink:

I've still got the cat on my car, though it is starting to rattle. Does that mean it's on its way out or do you think there is another issue at play here?
The guy testing my car said maybe there was an air leak or maybe it needed a re-map.

I've got a HKS exhaust manifold and a 5Zigen back box, everything else engine related is standard.

Anyone got any ideas?
Kevpr
29-08-2018, 03:42 AM #1

I had my MOT on Sat, all fine apart from a minor emissions problem.
CO2 is supposed to be 0.2 but mine was 3.8 ! :blink:

I've still got the cat on my car, though it is starting to rattle. Does that mean it's on its way out or do you think there is another issue at play here?
The guy testing my car said maybe there was an air leak or maybe it needed a re-map.

I've got a HKS exhaust manifold and a 5Zigen back box, everything else engine related is standard.

Anyone got any ideas?

jimxms
Posting Freak
2,473
29-08-2018, 03:53 AM
#2
Kevpr I had my MOT on Sat, all fine apart from a minor emissions problem.
CO2 is supposed to be 0.2 but mine was 3.8 ! :blink:

I've still got the cat on my car, though it is starting to rattle. Does that mean it's on its way out or do you think there is another issue at play here?
The guy testing my car said maybe there was an air leak or maybe it needed a re-map.

I've got a HKS exhaust manifold and a 5Zigen back box, everything else engine related is standard.

Anyone got any ideas?

If you're running different headers on your car then you will have lost your precats. Therefore if the emissions test was performed before the cat in your downpipe had a chance to warm up, that could have been the reason for the fail?

You could always try taking it out for a long hard drive and then getting him to stick it straight on the tester?
jimxms
29-08-2018, 03:53 AM #2

Kevpr I had my MOT on Sat, all fine apart from a minor emissions problem.
CO2 is supposed to be 0.2 but mine was 3.8 ! :blink:

I've still got the cat on my car, though it is starting to rattle. Does that mean it's on its way out or do you think there is another issue at play here?
The guy testing my car said maybe there was an air leak or maybe it needed a re-map.

I've got a HKS exhaust manifold and a 5Zigen back box, everything else engine related is standard.

Anyone got any ideas?

If you're running different headers on your car then you will have lost your precats. Therefore if the emissions test was performed before the cat in your downpipe had a chance to warm up, that could have been the reason for the fail?

You could always try taking it out for a long hard drive and then getting him to stick it straight on the tester?

Lexusboy
Posting Freak
9,267
29-08-2018, 03:53 AM
#3
obd11 will tell you the co2 levels and what your sensors are at
Lexusboy
29-08-2018, 03:53 AM #3

obd11 will tell you the co2 levels and what your sensors are at

Kevpr
Senior Member
379
29-08-2018, 04:00 AM
#4
I thought Altezzas (RS200) only had one cat?
I did take it for a long hard drive but they didn't test emissions straight away so the car cooled down a bit.

I'll get my mate to check the obd tonight.

Cheers.
Kevpr
29-08-2018, 04:00 AM #4

I thought Altezzas (RS200) only had one cat?
I did take it for a long hard drive but they didn't test emissions straight away so the car cooled down a bit.

I'll get my mate to check the obd tonight.

Cheers.

toxo
Posting Freak
4,843
29-08-2018, 04:05 AM
#5
Have you got the lambda figures from the test?
toxo
29-08-2018, 04:05 AM #5

Have you got the lambda figures from the test?

Kevpr
Senior Member
379
29-08-2018, 04:08 AM
#6
Cant remember what they were, but they were within range.
Kevpr
29-08-2018, 04:08 AM #6

Cant remember what they were, but they were within range.

jimxms
Posting Freak
2,473
29-08-2018, 04:09 AM
#7
Kevpr I thought Altezzas (RS200) only had one cat?
I did take it for a long hard drive but they didn't test emissions straight away so the car cooled down a bit.

I'll get my mate to check the obd tonight.

Cheers.

You may well be right mate, I don't know enough about them.
jimxms
29-08-2018, 04:09 AM #7

Kevpr I thought Altezzas (RS200) only had one cat?
I did take it for a long hard drive but they didn't test emissions straight away so the car cooled down a bit.

I'll get my mate to check the obd tonight.

Cheers.

You may well be right mate, I don't know enough about them.

toxo
Posting Freak
4,843
29-08-2018, 04:13 AM
#8
Well CO2 being too high means you're running way too rich, so probably a duff sensor (either air flow or temperature, water temperature, or lambda). As Ian said, stick an OBD2 reader on and see which sensor is reporting a ridiculous value.
toxo
29-08-2018, 04:13 AM #8

Well CO2 being too high means you're running way too rich, so probably a duff sensor (either air flow or temperature, water temperature, or lambda). As Ian said, stick an OBD2 reader on and see which sensor is reporting a ridiculous value.

Stoney
Posting Freak
2,117
29-08-2018, 04:13 AM
#9
I may be wrong here, but I thought the Auto 'Tezzas had manifold pre-cats, and the manuals did not?

With a reading that high I would suspect that your cat might be shot (also, rattling is never a good sign!) I assume it is the original factory one? Though as Jim said, was that from cold? My old Supercharged IS200 had precats removed and the main cat still in place. It would pass MOT, just, if it was nice and warm when tested.
Edited 10-10-2011, 01:48 PM by Stoney.

[Image: tempsig2.jpg]
Confusedad: It was a tough call to make, but the Supercharged IS200 is being retired. Confusedad:
Stoney
29-08-2018, 04:13 AM #9

I may be wrong here, but I thought the Auto 'Tezzas had manifold pre-cats, and the manuals did not?

With a reading that high I would suspect that your cat might be shot (also, rattling is never a good sign!) I assume it is the original factory one? Though as Jim said, was that from cold? My old Supercharged IS200 had precats removed and the main cat still in place. It would pass MOT, just, if it was nice and warm when tested.


[Image: tempsig2.jpg]
Confusedad: It was a tough call to make, but the Supercharged IS200 is being retired. Confusedad:

Kevpr
Senior Member
379
29-08-2018, 04:24 AM
#10
I think you're right stoney, autos do have pre-cats. Mine's a manual.

The car wasn't cold. I ragged it to the test centre where it was left idling untill it was tested. Yep, original cat. You can only hear the rattling if you jack the car up an bang on the cat. It's not audible while driving.

I will report back when the obd has been read.
Thanks for the help everyone.
Kevpr
29-08-2018, 04:24 AM #10

I think you're right stoney, autos do have pre-cats. Mine's a manual.

The car wasn't cold. I ragged it to the test centre where it was left idling untill it was tested. Yep, original cat. You can only hear the rattling if you jack the car up an bang on the cat. It's not audible while driving.

I will report back when the obd has been read.
Thanks for the help everyone.

Pages (2): 1 2 Next
Recently Browsing
 2 Guest(s)
Recently Browsing
 2 Guest(s)
Related Threads…
Replies 2
Views 305
06-08-2022, 11:58 AM
Last Post by Brad92
Replies 1
Views 314
03-09-2021, 07:20 PM
Last Post by Ratchet
Replies 3
Views 236
14-03-2021, 03:16 AM
Last Post by TezzaJoe
Replies 1
Views 165
13-12-2020, 01:02 AM
Last Post by Rabster
Replies 4
Views 275
05-12-2019, 02:23 AM
Last Post by Reject1970
Replies 3
Views 306
01-10-2019, 05:15 PM
Last Post by PETEHAMASAKI
Replies 12
Views 611
21-07-2019, 10:57 AM
Last Post by Chris0121
Replies 5
Views 402
18-06-2019, 03:14 AM
Last Post by Kevpr
Replies 2
Views 388
23-05-2019, 12:27 PM
Last Post by FirebirdPhil