Interior light help needed
Interior light help needed
davidjamesbattersby
03-10-2018, 08:12 AM #1Can any one tell me which wires are the negative. Perm live and the switched live wires are in the roof light please
davidjamesbattersby
03-10-2018, 09:46 AM #3bump please can any one help, just looked at a wiring diagram but still cant figure out what wires are for what
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
03-10-2018, 10:13 AM #4Do you have a multi meter??? Or take a look at the switch the live is always the switched side - earth's are never usually switched for safety reasons.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
Right i've searched through my old paperwork and found my diagrams for when i wired up my Roof screens interior light.
There should be 5 wires going into the light:
Red & White
Black & White
Blue & Yellow
Green with Silver Flecks
Green Orange.
The ultrasonic sensor should then plug in the other side. Take that plug out and unscrew the sensor and fit it somewhere in the roof or screen holder.
The connections should then be as follows:
Red & White - Light on with Door open
Black & White - Light on Permantly
Blue & Yellow - Bulb and last wire on sensor
Green with Silver Flecks - Red wire from sensor
Green Orange - Blue wire from sensor.
Found this, really not sure if it helps at all?
Right i've searched through my old paperwork and found my diagrams for when i wired up my Roof screens interior light.
There should be 5 wires going into the light:
Red & White
Black & White
Blue & Yellow
Green with Silver Flecks
Green Orange.
The ultrasonic sensor should then plug in the other side. Take that plug out and unscrew the sensor and fit it somewhere in the roof or screen holder.
The connections should then be as follows:
Red & White - Light on with Door open
Black & White - Light on Permantly
Blue & Yellow - Bulb and last wire on sensor
Green with Silver Flecks - Red wire from sensor
Green Orange - Blue wire from sensor.
davidjamesbattersby
03-10-2018, 11:10 AM #6thats great whast the earth then lol and whats the sensor attached to it
davidjamesbattersby
03-10-2018, 12:01 PM #7any idea where i can pick up a earth for this then im sorted
the roof light that turns on with the door?
then there is no earth wire. The "on" selection goes directly to earth.
the red wire goes to the ECU
the blue/yellow wire goes to the live
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
03-10-2018, 01:08 PM #8which light you on about?
the roof light that turns on with the door?
then there is no earth wire. The "on" selection goes directly to earth.
the red wire goes to the ECU
the blue/yellow wire goes to the live
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
davidjamesbattersby
03-10-2018, 01:13 PM #9im fittim bmw lights in the c pillor so need a live that is from when the door opens, a live thats switched(ideally) or permanent and a earth for them
davidjamesbattersby
03-10-2018, 01:26 PM #10stav is the info above from just phil correct, if so all i need to do is pick up a earth from some where near the rear c pillor
2 Guest(s)
2 Guest(s)
Views 681
Last Post by