projector headlights
projector headlights
christopherhughes
13-10-2018, 12:06 AM #1Hi all, i've been looking at buying some projector headlights form USA, these are for the is300, however spoke to the guy over there and he said a very small amount needs trimming off the top of the lights to make them fit the is200. Has anyone fitted these or is300 lights to the 200? Cheers
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
is300_dino
13-10-2018, 01:06 AM #2i have heard the fittings are slightly different, Ormi was looking into doing the same sort of project using is300 lights so he may have some info on how to install them, but also remember the light scatter will be wrong as they drive on the wrong side of the road so the light will shine in the wrong direction and will fail MOT if you do not correct the angle of light.
jae 2010 best lexus category show and shine winner
jae 2010 ice outlaw award 2nd place
jae 2011 ice outlaw award 1st place
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
13-10-2018, 06:44 AM #4It is unusual for US cars to have angled lights,they are usually set to point straight forwards, so you may be lucky and they may be easy to angle to UK spec.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
jay_russell
13-10-2018, 07:47 AM #5they fit in without problems and are very adjustable, the will go both ways, mine went in without problems, but they sometimes need the oem hid ballests like mine, these cost 90 dollars each
![[Image: dsc7729fix.jpg]](http://img252.imageshack.us/img252/9378/dsc7729fix.jpg)
And this is what you have to cut to be able to fit an IS300 headlight to an IS200 without factory xenon headlights.
![[Image: dsc7734fix.jpg]](http://img177.imageshack.us/img177/8374/dsc7734fix.jpg)
P.Lindblom
13-10-2018, 08:55 AM #6Here's the difference between a 1st gen IS HID headlight (top) and a halogen headlight (bottom)
And this is what you have to cut to be able to fit an IS300 headlight to an IS200 without factory xenon headlights.
jay_russell
13-10-2018, 09:08 AM #7opps yer mine are oem hids so they fitted without removing anything
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
you can buy a projector kit that fits straight in to the headlight(you do need to split the lights though)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
el_bandido
13-10-2018, 02:54 PM #9what happened to that thread with all the info on the projector shrouds and stuff? I can't seem to find it.
2 Guest(s)
2 Guest(s)
Views 251
Last Post by
Views 283
Last Post by
Views 1,177
Last Post by
Views 577
Last Post by
Views 1,016
Last Post by
Views 900
Last Post by
Views 2,040
Last Post by