1ggte pistons
1ggte pistons
For the cost of the pins I would replace them now saves something going wrong just after the rebuild....
I have a set or ARP head studs if you fancy as you are upping the power.....
For the cost of the pins I would replace them now saves something going wrong just after the rebuild....
Pm me.
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
28-11-2018, 01:35 PM #33I'm interested in a spare set! How much?
Pm me.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
jimbob150385 So i can use my crank gd gd
I need new bearings for the pistons if used
shells i need to find
is it worth changing the piston pins then?
new piston rings
Right
yes you will nedd new mains bearings and new big end bearings
the pistion pins take them out and have alook see what there like you could always take it to a engine builders to get them to check
small end shells for them i had to have made toyota dont stock them dont know of anyone else that does?
new piston rings yes you can still get these from toyota
Things done :- SPC turbo kit (custom), Blueflame cat back with custom tip, B&M shortshift, grooved discs all round, Mintex pads all round, OEM wheels in white,Denso ik22s, Calipers painted black,04 spec rear lights, Tein basic coilovers, Helix organic clutch, Fan washer jets, late spec headlights (dark), Carbon bonnet, Hotchkis anti roll bars, Front arm rest, Top box from late spec.
jimbob150385 So i can use my crank gd gd
I need new bearings for the pistons if used
shells i need to find
is it worth changing the piston pins then?
new piston rings
Right
yes you will nedd new mains bearings and new big end bearings
the pistion pins take them out and have alook see what there like you could always take it to a engine builders to get them to check
small end shells for them i had to have made toyota dont stock them dont know of anyone else that does?
new piston rings yes you can still get these from toyota
Things done :- SPC turbo kit (custom), Blueflame cat back with custom tip, B&M shortshift, grooved discs all round, Mintex pads all round, OEM wheels in white,Denso ik22s, Calipers painted black,04 spec rear lights, Tein basic coilovers, Helix organic clutch, Fan washer jets, late spec headlights (dark), Carbon bonnet, Hotchkis anti roll bars, Front arm rest, Top box from late spec.
Anyone know how i can get part numbers for these??
Jimbob-T-Lex
29-11-2018, 12:50 PM #36mains bearings and new big end bearings
Anyone know how i can get part numbers for these??
to get the right ones then you still have to check the oil Clearance’s to make sure there 100% right
I must be quite lucky having the hole set of genuine lexus workshop manuals at home!
Things done :- SPC turbo kit (custom), Blueflame cat back with custom tip, B&M shortshift, grooved discs all round, Mintex pads all round, OEM wheels in white,Denso ik22s, Calipers painted black,04 spec rear lights, Tein basic coilovers, Helix organic clutch, Fan washer jets, late spec headlights (dark), Carbon bonnet, Hotchkis anti roll bars, Front arm rest, Top box from late spec.
to get the bearing mate its not as simple as just getting them you need the bearing grading sheet and numbers from the block, crank and rods
to get the right ones then you still have to check the oil Clearance’s to make sure there 100% right
I must be quite lucky having the hole set of genuine lexus workshop manuals at home!
Things done :- SPC turbo kit (custom), Blueflame cat back with custom tip, B&M shortshift, grooved discs all round, Mintex pads all round, OEM wheels in white,Denso ik22s, Calipers painted black,04 spec rear lights, Tein basic coilovers, Helix organic clutch, Fan washer jets, late spec headlights (dark), Carbon bonnet, Hotchkis anti roll bars, Front arm rest, Top box from late spec.
numbers from the block easy enough, crank and rods is there a etching on them?
http://www.toyodiy.com/parts/p_E_199907_..._1301.html
Jimbob-T-Lex
30-11-2018, 01:20 PM #38Just found this so how will i know which ones i need?
numbers from the block easy enough, crank and rods is there a etching on them?
http://www.toyodiy.com/parts/p_E_199907_..._1301.html
http://www.toyodiy.com/parts/g_E_199907_...VKW_1.html
Jimbob-T-Lex
30-11-2018, 01:21 PM #39very gd link by the looks of thing gives all part numbers
http://www.toyodiy.com/parts/g_E_199907_...VKW_1.html
Jimbob-T-Lex
07-12-2018, 10:35 AM #40Ok so the nxt thing i have got is a engine that has done 25k miles so i need to get that stripped bear i also got a new gasket set aswell so what is it i need to do to get the the big end shell bearing thought these would be the same as the normal 1g-fe ones and i need the the numbers off the block the crank and the rods for the main bearings was it?
3 Guest(s)
3 Guest(s)
Views 980
Last Post by