Little write up on the evolution of my car
Little write up on the evolution of my car
09-12-2018, 02:06 PM
SIDEWAYS IS THE ONLY WAY!!!
Nissan 200sx S14A (Project Baby BEL)
http://www.outlawjapclub.co.uk/forum/sho...php?t=9894
Awsome, looking foward to it. Looks as if RSCS is gunna be a good one
SIDEWAYS IS THE ONLY WAY!!!
Nissan 200sx S14A (Project Baby BEL)
http://www.outlawjapclub.co.uk/forum/sho...php?t=9894
09-12-2018, 02:09 PM
Quote:1. Rebuild Engine Head -done
2. Fit Supra rear arches -started
3. Fit Gearbox temp -done
4. Redo gauge holder
5. Wire tuck on arches -done
6. Remove old wiring -done
7. Fit new alarm -started
8. Remove standard ECU -done
9. Flush rear lip
10. Fit water injection kit and tank -started
11. Return fuel line
12. Check bolts on chassis braces -done
13. Recover roof inside
14. Recover roof outside
15. Redo boot in aluminium (Perspex window?)
16. Make Front mounted inlet
17. Stick HUD controls properly
18. Clean speedo surround
19. New gear display -done
20. Fit new water pipe -done
21. Recover rev lights
22. Make AC panel Blue
23. Fit remote and decide on actions
24. Fit new Drop links
25. Fit purge spray
26. Make intercooler backing
27. Fit movement sensor
28. Make new gearstick panel
29. Start speaker mount rear
30. Fit HKS CAMP -sold
31. Do other side of roof -done
32. Finish button on gearstick
33. Sort roll lock
34. De-power lock switch
35. Refit turbo timer
36. Sort Boot button
So 10 jobs down, 3 others started
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
09-12-2018, 02:09 PM #682My list so far:
Quote:1. Rebuild Engine Head -done
2. Fit Supra rear arches -started
3. Fit Gearbox temp -done
4. Redo gauge holder
5. Wire tuck on arches -done
6. Remove old wiring -done
7. Fit new alarm -started
8. Remove standard ECU -done
9. Flush rear lip
10. Fit water injection kit and tank -started
11. Return fuel line
12. Check bolts on chassis braces -done
13. Recover roof inside
14. Recover roof outside
15. Redo boot in aluminium (Perspex window?)
16. Make Front mounted inlet
17. Stick HUD controls properly
18. Clean speedo surround
19. New gear display -done
20. Fit new water pipe -done
21. Recover rev lights
22. Make AC panel Blue
23. Fit remote and decide on actions
24. Fit new Drop links
25. Fit purge spray
26. Make intercooler backing
27. Fit movement sensor
28. Make new gearstick panel
29. Start speaker mount rear
30. Fit HKS CAMP -sold
31. Do other side of roof -done
32. Finish button on gearstick
33. Sort roll lock
34. De-power lock switch
35. Refit turbo timer
36. Sort Boot button
So 10 jobs down, 3 others started
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
09-12-2018, 03:04 PM
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
i have an idea for your water bottle sensor.......when you see a puddle on the floor its full
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
09-12-2018, 03:13 PM
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
09-12-2018, 03:13 PM #684Lol but having a sensor is just way more cooler
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
10-12-2018, 01:05 AM
Sparkystav Lol but having a sensor is just way more cooler
Yes and you will also know when to refil it...I was thinking to fit at the same place the bottle of the water injection. I also need to get a level sensor...
LEXUS IS200 - The most fun car to go sideways
Sparkystav Lol but having a sensor is just way more cooler
Yes and you will also know when to refil it...I was thinking to fit at the same place the bottle of the water injection. I also need to get a level sensor...
LEXUS IS200 - The most fun car to go sideways
10-12-2018, 01:08 AM
Unless you remove the standard water bottle you won't have space where I've mounted that one.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
10-12-2018, 01:08 AM #686I've bought a 5l metal tank for the WI. Going to mount it in the boot
Unless you remove the standard water bottle you won't have space where I've mounted that one.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
10-12-2018, 07:15 AM
Sparkystav I've bought a 5l metal tank for the WI. Going to mount it in the boot
Unless you remove the standard water bottle you won't have space where I've mounted that one.
Aha, what about the other side of the bumper? I think there is a good space there to fit the bottle. I also thought the boot, but i have not found a good place to mount the bottle. It will be a good idea if you post some pics of your WI installation to give some ideas.
LEXUS IS200 - The most fun car to go sideways
Sparkystav I've bought a 5l metal tank for the WI. Going to mount it in the boot
Unless you remove the standard water bottle you won't have space where I've mounted that one.
Aha, what about the other side of the bumper? I think there is a good space there to fit the bottle. I also thought the boot, but i have not found a good place to mount the bottle. It will be a good idea if you post some pics of your WI installation to give some ideas.
LEXUS IS200 - The most fun car to go sideways
10-12-2018, 07:23 AM
I'm Going to follow Jims installation, pump under the carpet in the corner and the tank on top fitted nicely in the corner.
Will post some pics another time.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
10-12-2018, 07:23 AM #688I thought about that but got the alarm siren and if I need to fit a decent sized tank, pump, and other bits they wont all fit.
I'm Going to follow Jims installation, pump under the carpet in the corner and the tank on top fitted nicely in the corner.
Will post some pics another time.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
10-12-2018, 08:05 AM
Sparkystav I thought about that but got the alarm siren and if I need to fit a decent sized tank, pump, and other bits they wont all fit.
I'm Going to follow Jims installation, pump under the carpet in the corner and the tank on top fitted nicely in the corner.
Will post some pics another time.
Ok thanks mate!
LEXUS IS200 - The most fun car to go sideways
Sparkystav I thought about that but got the alarm siren and if I need to fit a decent sized tank, pump, and other bits they wont all fit.
I'm Going to follow Jims installation, pump under the carpet in the corner and the tank on top fitted nicely in the corner.
Will post some pics another time.
Ok thanks mate!
LEXUS IS200 - The most fun car to go sideways
18-12-2018, 01:24 PM
Engine bays nearly done, its not perfect but its good enough
![[Image: IMG_1494.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/rebuild/IMG_1494.jpg)
![[Image: IMG_1495.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/rebuild/IMG_1495.jpg)
![[Image: IMG_1496.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/rebuild/IMG_1496.jpg)
Engines nearly built as well, just need to check all the shim spacings before putting the cam covers on.
Also in order to fit the new manifold im having to move the alternator so its not in the way. I had already made the decision to remove Aircon for 2 reasons - save power, and the pipes just mess up the engine bay lol.
So the brackets nearly done just need some thinner aluminium so it lines up perfectly.
def feel like im getting somewhere now.
![[Image: IMG_1493.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/rebuild/IMG_1493.jpg)
![[Image: IMG_1498.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/rebuild/IMG_1498.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
18-12-2018, 01:24 PM #690Few more pics:
Engine bays nearly done, its not perfect but its good enough
Engines nearly built as well, just need to check all the shim spacings before putting the cam covers on.
Also in order to fit the new manifold im having to move the alternator so its not in the way. I had already made the decision to remove Aircon for 2 reasons - save power, and the pipes just mess up the engine bay lol.
So the brackets nearly done just need some thinner aluminium so it lines up perfectly.
def feel like im getting somewhere now.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Recently Browsing
4 Guest(s)
4 Guest(s)
Recently Browsing
4 Guest(s)
4 Guest(s)
Related Threads…
Replies 2
Views 283
Views 283
22-02-2024, 02:07 PM
Last Post bySparkystav
Last Post by