Little write up on the evolution of my car
Little write up on the evolution of my car
25-12-2018, 03:50 AM
I was going to tap into the OS Y pipe even made up a couple of reducers (3" to 2.5"), but as the cat back is 3" and there was a perfect place to put it, why waste the opportunity.
There are boost activated ones available I would have gone that way, if I had boost.
Edited 05-02-2012, 01:25 PM by FirebirdPhil.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
25-12-2018, 03:50 AM #711Its inline on the 3" cat back where it joins the Y piece, sits nicely where the rear seats are.
I was going to tap into the OS Y pipe even made up a couple of reducers (3" to 2.5"), but as the cat back is 3" and there was a perfect place to put it, why waste the opportunity.
There are boost activated ones available I would have gone that way, if I had boost.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
25-12-2018, 09:11 AM
Edited 05-02-2012, 08:33 PM by Moley.
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
I bet your welding is not as good as what Stav has on his lol
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
25-12-2018, 10:27 AM
This is a photo of one of the reducers I made up ready to install:
![[Image: 3to25reducer.jpg]](http://i858.photobucket.com/albums/ab149/2tongues/3to25reducer.jpg)
![[Image: P1030506.jpg]](http://i858.photobucket.com/albums/ab149/2tongues/P1030506.jpg)
Welded on a lathe so it was easy to turn and keep it all straight, then finished off with emery to remove welding marks.
Edited 05-02-2012, 08:02 PM by FirebirdPhil.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
25-12-2018, 10:27 AM #713I bet it is Moley.
This is a photo of one of the reducers I made up ready to install:
Welded on a lathe so it was easy to turn and keep it all straight, then finished off with emery to remove welding marks.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
25-12-2018, 10:52 AM
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
25-12-2018, 10:52 AM #714So it is on a y piece.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
25-12-2018, 10:53 AM
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
25-12-2018, 10:53 AM #715And Molly's welding looks better lol sorry
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
25-12-2018, 10:57 AM
Sparkystav And Molly's welding looks better lol sorry
Well said Stav
iscoStu:
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Sparkystav And Molly's welding looks better lol sorry
Well said Stav
iscoStu:
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
25-12-2018, 10:57 AM
Sparkystav So it is on a y piece.
Sorry I thought you meant the Y piece of the exhaust system lol.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
25-12-2018, 10:57 AM #717Sparkystav So it is on a y piece.
Sorry I thought you meant the Y piece of the exhaust system lol.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
25-12-2018, 11:01 AM
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Phil I must say you did a good job there !!!!!! , but you should have posted it up to get it welded :kiltsmilie::biggrin:
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
25-12-2018, 11:03 AM
Moley Well said Stav
Mine is better then whoever made the Y piece - thats good enough for me.
As an amateur who hasn't welded more them 10 times I think its very good especially as its stainless and someone else's kit that I had no idea how to set up the way I want. Then again welding is easy, its not as though its hard lol.
The wire feed dial was broken and was feeding so slowly.
Edited 05-02-2012, 08:38 PM by FirebirdPhil.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
25-12-2018, 11:03 AM #719Moley Well said Stav
Mine is better then whoever made the Y piece - thats good enough for me.
As an amateur who hasn't welded more them 10 times I think its very good especially as its stainless and someone else's kit that I had no idea how to set up the way I want. Then again welding is easy, its not as though its hard lol.
The wire feed dial was broken and was feeding so slowly.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
25-12-2018, 11:08 AM
2tongues Mine is better then whoever made the Y piece - thats good enough for me.
As an amateur who hasn't welded more them 10 times I think its very good especially as its stainless and someone else's kit that I had no idea how to set up the way I want. Then again welding is easy, its not as though its hard lol.
The wire feed dial was broken and was feeding so slowly.
Sorry I thought the welding on the Y was yours , so what bit did you weld ?
I think we will need to delete this conversation once its run it course to tidy up Stavs thread LOL
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
2tongues Mine is better then whoever made the Y piece - thats good enough for me.
As an amateur who hasn't welded more them 10 times I think its very good especially as its stainless and someone else's kit that I had no idea how to set up the way I want. Then again welding is easy, its not as though its hard lol.
The wire feed dial was broken and was feeding so slowly.
Sorry I thought the welding on the Y was yours , so what bit did you weld ?
I think we will need to delete this conversation once its run it course to tidy up Stavs thread LOL
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Recently Browsing
10 Guest(s)
10 Guest(s)
Recently Browsing
10 Guest(s)
10 Guest(s)
Related Threads…
Replies 2
Views 283
Views 283
22-02-2024, 02:07 PM
Last Post bySparkystav
Last Post by