Mr2 mods and advice
Mr2 mods and advice
[SIGPIC][/SIGPIC] [COLOR="DarkOrchid"]That symbol on the side of my door.. Definition by FirebirdPhil 'Translated it means -
"try to overtake - go on give it a go I dare you......." [/COLOR]
I'm not an Outlaw; I'm a Poutlaw! Purple Supras are the bestest! I love purple .. a lot lot lot
purplewitch
30-12-2018, 07:04 AM #11With you being a carpenter, can't you just build a huge downward slide to get a good run up to the strip on ? .. Stick some sails on the roof, it's always windy at the pod !
[SIGPIC][/SIGPIC] [COLOR="DarkOrchid"]That symbol on the side of my door.. Definition by FirebirdPhil 'Translated it means -
"try to overtake - go on give it a go I dare you......." [/COLOR]
I'm not an Outlaw; I'm a Poutlaw! Purple Supras are the bestest! I love purple .. a lot lot lot
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
30-12-2018, 07:05 AM #12All forced induction set ups should have this IMHO.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
Id be at max 1.2 bar with the ct20b..is the meth 100% safe? only a few hundred quid..and if it does what it says on the tin, fantastic!
Mr2 rev1 Turbo; decat, mongoose exhaust,blitz induction, gizzmo ms-ibc ebc@1bar, aftermarket intercooler, grooved front discs
mr2tubbyben
30-12-2018, 07:23 AM #14i don't know a thing about methanol injection..is it just a case of getting the kit, get it properly installed..then headache free motoring? or can it cause issues that otherwise wouldn't have occured?
Id be at max 1.2 bar with the ct20b..is the meth 100% safe? only a few hundred quid..and if it does what it says on the tin, fantastic!
Mr2 rev1 Turbo; decat, mongoose exhaust,blitz induction, gizzmo ms-ibc ebc@1bar, aftermarket intercooler, grooved front discs
purplewitch With you being a carpenter, can't you just build a huge downward slide to get a good run up to the strip on ? .. Stick some sails on the roof, it's always windy at the pod !
Lol hmm..sails could be a good option..but got to hope and pray that the wind is blowing in the right direction..
I'm hoping i can run low 13 seconds, don't know if that's a realistic figure with the mods im planning
Mr2 rev1 Turbo; decat, mongoose exhaust,blitz induction, gizzmo ms-ibc ebc@1bar, aftermarket intercooler, grooved front discs
mr2tubbyben
30-12-2018, 07:25 AM #15purplewitch With you being a carpenter, can't you just build a huge downward slide to get a good run up to the strip on ? .. Stick some sails on the roof, it's always windy at the pod !
Lol hmm..sails could be a good option..but got to hope and pray that the wind is blowing in the right direction..
I'm hoping i can run low 13 seconds, don't know if that's a realistic figure with the mods im planning
Mr2 rev1 Turbo; decat, mongoose exhaust,blitz induction, gizzmo ms-ibc ebc@1bar, aftermarket intercooler, grooved front discs
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
30-12-2018, 07:28 AM #16If it runs out of meth or water and your tuned to the limit and continue driving at the limit then you will have a problem. You would be pretty silly to do that.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
Mr2 rev1 Turbo; decat, mongoose exhaust,blitz induction, gizzmo ms-ibc ebc@1bar, aftermarket intercooler, grooved front discs
mr2tubbyben
30-12-2018, 07:30 AM #17Oh yeh course, just keep a spare bottle of it in the boot!
Mr2 rev1 Turbo; decat, mongoose exhaust,blitz induction, gizzmo ms-ibc ebc@1bar, aftermarket intercooler, grooved front discs
Meth and water injection have bottles you have to refill from time to time but the kits usually have a warning LED to tell you when the level is getting low. So almost fit and forget!
You don't want to run a ct20b at 1.2 bar unless you like replacing pistons. 1.15 should be the absolute limit and only with GOOD supporting cooling (no eBay intercoolers).
Meth and water injection have bottles you have to refill from time to time but the kits usually have a warning LED to tell you when the level is getting low. So almost fit and forget!
If you run it like Jim ran it on his IS as just an added extra, it helps protect the engine but isn't reliant on it.
If its built into your map like I want mine to be you'll need something to tell you when theres no flow. I've got a snow performance bit of kit that sends a 12v signal to the ecu when it doesn't detect flow (pump break, blockage, or you just run out of water). That will be tied to the map to cut things back if it happens to save the engine.
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
30-12-2018, 07:40 AM #19Depends how you rely on the meth.
If you run it like Jim ran it on his IS as just an added extra, it helps protect the engine but isn't reliant on it.
If its built into your map like I want mine to be you'll need something to tell you when theres no flow. I've got a snow performance bit of kit that sends a 12v signal to the ecu when it doesn't detect flow (pump break, blockage, or you just run out of water). That will be tied to the map to cut things back if it happens to save the engine.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Mr2 rev1 Turbo; decat, mongoose exhaust,blitz induction, gizzmo ms-ibc ebc@1bar, aftermarket intercooler, grooved front discs
mr2tubbyben
31-12-2018, 03:19 AM #20I was looking at the snow kits actually..however i spoke to luke@ pacific works yesterday, he reckons i could spend my money in better ways. He said it can sap power, only really beneficial for highly tuned engines in the hot weather. i dont have a clue about it so i can only go by what others advise
Mr2 rev1 Turbo; decat, mongoose exhaust,blitz induction, gizzmo ms-ibc ebc@1bar, aftermarket intercooler, grooved front discs
1 Guest(s)
1 Guest(s)
Views 407
Last Post by