Lerch's Mazda 323F
Lerch's Mazda 323F
Lerch
What do you mean? She's special to you, isn't she? Always take pride in your work...
Jaminglish
24-01-2019, 03:55 AM #11I know shes nothing special but i love it Anyway cheers for looking
Lerch
What do you mean? She's special to you, isn't she? Always take pride in your work...
Kiyomi is a nightmare but she's mine for all her bad bits and good bits
Looks good mate keep it up
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
Which is 98miles from the villa ground in aston (yes I'm a villa fan)
Its an easy drive and ticket price is super cheap for a weekend event have a look in the national event thread for Rising Sun Car Show
Can't say I know of any in the west mids but there's a new show we as a club are attending this year in lincolnshire
Which is 98miles from the villa ground in aston (yes I'm a villa fan)
Its an easy drive and ticket price is super cheap for a weekend event have a look in the national event thread for Rising Sun Car Show
Progress so far has included ripping out the AC and all the different components. Removing the AC pump will allow me enough space to mount the SC. The SC itself is an Eaton M45 from a merc of some kind i believe. Its a rather big lump of an SC but I've measured everything up and it will fit with slimmer rad fans and a smartly designed bracket. I am building a custom intercooler but for the low amounts of pressure i want, i dont think it will be entirely necessary. We all know that the Z5 engine isn't the strongest engine in the world so this will obviously determine the amount of PSI i can run before the thing blows up. I plan to build everything on to another engine which i have in my shed.
I decided to buy a Megasquirt ECU kit which i would need to custom build myself. It was a little daunting receiving a box full of small electrical components but its all about learning and bettering myself which is also a reason why I'm doing the overall conversion. Having now finished the ECU build id say it was rather easy once i got in to it and followed the correct online guides. It did take a little time to figure out what was needed for the custom circuits but i found a brilliant online document which basically tells you every last detail about the Z5 engine.
Anyway pictures speak louder than words so here are some pictures of the ECU build.
the standard board with the connectors soldered in and some of the components
![[Image: 1003144i.jpg]](http://imageshack.us/photo/my-images/839/1003144i.jpg/)
![[Image: 1003143d.jpg]](http://imageshack.us/photo/my-images/826/1003143d.jpg/)
some of the components now soldered in
![[Image: 1003160y.jpg]](http://imageshack.us/photo/my-images/96/1003160y.jpg/)
![[Image: 1003165.jpg]](http://imageshack.us/photo/my-images/546/1003165.jpg/)
nearly done
![[Image: 1003166x.jpg]](http://imageshack.us/photo/my-images/811/1003166x.jpg/)
and finished in the case.
![[Image: 1003168p.jpg]](http://imageshack.us/photo/my-images/9/1003168p.jpg/)
I would of uploaded more step by step pics if i could find my other memory card with all my original pics on
here some pics of the SC itself with a new inlet/outlet plate on that i made at work
![[Image: 1003169is.jpg]](http://imageshack.us/photo/my-images/43/1003169is.jpg/)
![[Image: 1003171a.jpg]](http://imageshack.us/photo/my-images/560/1003171a.jpg/)
![[Image: 1003170z.jpg]](http://imageshack.us/photo/my-images/571/1003170z.jpg/)
and finally the custom intercooler i custom built at work too
![[Image: 20120309150631.jpg]](http://imageshack.us/photo/my-images/827/20120309150631.jpg/)
anyway, hoping to make some progress on this over the next few weeks
Lerch out.
Right ive decided to try and supercharge my ride
Progress so far has included ripping out the AC and all the different components. Removing the AC pump will allow me enough space to mount the SC. The SC itself is an Eaton M45 from a merc of some kind i believe. Its a rather big lump of an SC but I've measured everything up and it will fit with slimmer rad fans and a smartly designed bracket. I am building a custom intercooler but for the low amounts of pressure i want, i dont think it will be entirely necessary. We all know that the Z5 engine isn't the strongest engine in the world so this will obviously determine the amount of PSI i can run before the thing blows up. I plan to build everything on to another engine which i have in my shed.
I decided to buy a Megasquirt ECU kit which i would need to custom build myself. It was a little daunting receiving a box full of small electrical components but its all about learning and bettering myself which is also a reason why I'm doing the overall conversion. Having now finished the ECU build id say it was rather easy once i got in to it and followed the correct online guides. It did take a little time to figure out what was needed for the custom circuits but i found a brilliant online document which basically tells you every last detail about the Z5 engine.
Anyway pictures speak louder than words so here are some pictures of the ECU build.
the standard board with the connectors soldered in and some of the components
some of the components now soldered in
nearly done
and finished in the case.
I would of uploaded more step by step pics if i could find my other memory card with all my original pics on
here some pics of the SC itself with a new inlet/outlet plate on that i made at work
and finally the custom intercooler i custom built at work too
anyway, hoping to make some progress on this over the next few weeks
Lerch out.
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Awesome ...
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
1 Guest(s)
1 Guest(s)
Views 410
Last Post by
Views 3,514
Last Post by
Views 1,222
Last Post by