New rims
New rims
Brand : Kei Racing
Model : Evo
Width : 8J,
Diameter : 8x18 (Front) & 9x18 (Rear)
Bolt Pattern : 5x114.3
Offset : ET28 (Front) & ET33 (Rear)
Colour : Hyper Black , Red
Style : 10 Spoke
Will they fit on my is? The suspension is standard at the moment but I do want to fit coilies and lower it
Im after some new rims, not sure on the fitment though,
Brand : Kei Racing
Model : Evo
Width : 8J,
Diameter : 8x18 (Front) & 9x18 (Rear)
Bolt Pattern : 5x114.3
Offset : ET28 (Front) & ET33 (Rear)
Colour : Hyper Black , Red
Style : 10 Spoke
Will they fit on my is? The suspension is standard at the moment but I do want to fit coilies and lower it
How much did you pay for them, just out of interest?
el_bandido
02-04-2019, 10:59 AM #29 is going to be interesting on the rears!
How much did you pay for them, just out of interest?
The rear with that width and offset should be spot on though. It will be further out than stock, but nice and flush with the arch.
sprinter2012
02-04-2019, 11:48 AM #3From memory, the front with that width and offset will stick out out 10-15mm
The rear with that width and offset should be spot on though. It will be further out than stock, but nice and flush with the arch.
![[Image: s_img_5434.jpg]](http://i2.sqi.sh/s_1/6Tp/s_img_5434.jpg)
And this is a 9J et35 on the same car...
![[Image: s_img_5415.jpg]](http://i2.sqi.sh/s_1/6Tp/s_img_5415.jpg)
So because you have a lower offset, the front will stick out about 10mm more but the rear will only be 2mm different.
sprinter2012
02-04-2019, 12:30 PM #5This is an 8J et35 on the front of an IS...
And this is a 9J et35 on the same car...
So because you have a lower offset, the front will stick out about 10mm more but the rear will only be 2mm different.
![[Image: ormiedit1-2.jpg]](http://i214.photobucket.com/albums/cc320/tempra5/ormiedit1-2.jpg)
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
they will fit....if you roll hell out your arches.....and when i say roll i mean stretch
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
2 Guest(s)
2 Guest(s)
Views 1,640
Last Post by
Views 747
Last Post by