how important is the ground when fitting gauges
how important is the ground when fitting gauges
Can someone tell me how important the ground is when fitting gauges - specifically an AFR Gauge and a boost gauge.
I read somewhere that the ground you use for the AFR is very important, I was just going to use the ground from the stereo - is this ok? Or should I run a separate ground to a grounding point?
Thanks
Stix
Hello all,
Can someone tell me how important the ground is when fitting gauges - specifically an AFR Gauge and a boost gauge.
I read somewhere that the ground you use for the AFR is very important, I was just going to use the ground from the stereo - is this ok? Or should I run a separate ground to a grounding point?
Thanks
Stix
I use the bolts that hold the stereo in.
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
15-06-2020, 01:16 PM #2Run a good ground it's important to ensure the correct voltage.
I use the bolts that hold the stereo in.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
[SIGPIC][/SIGPIC] [COLOR="DarkOrchid"]That symbol on the side of my door.. Definition by FirebirdPhil 'Translated it means -
"try to overtake - go on give it a go I dare you......." [/COLOR]
I'm not an Outlaw; I'm a Poutlaw! Purple Supras are the bestest! I love purple .. a lot lot lot
purplewitch
15-06-2020, 03:24 PM #3Witchanic wouldn't fit gauges on the ground ... When you drive away you will either run them over or leave them behind
[SIGPIC][/SIGPIC] [COLOR="DarkOrchid"]That symbol on the side of my door.. Definition by FirebirdPhil 'Translated it means -
"try to overtake - go on give it a go I dare you......." [/COLOR]
I'm not an Outlaw; I'm a Poutlaw! Purple Supras are the bestest! I love purple .. a lot lot lot
I have an old plenum for sale if you want that?
It's basically a machined tube, with threaded fittings. You connect the boost off take to the end, the. Tap off from the other ports.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
15-06-2020, 03:51 PM #6No mate it doesn't matter. Just more places to leak though so make sure theyre tight.
I have an old plenum for sale if you want that?
It's basically a machined tube, with threaded fittings. You connect the boost off take to the end, the. Tap off from the other ports.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
1 Guest(s)
1 Guest(s)
Views 176
Last Post by
Views 2,136
Last Post by
Views 1,818
Last Post by
Views 4,325
Last Post by
Views 1,880
Last Post by