[IS200] Recommend replacement 6x9's for the back shelf?
[IS200] Recommend replacement 6x9's for the back shelf?
I really CBA to go down the amp + sub route, and realise I won't get 6x9's sounding like a sub, but would like a pair that can handle and kick out some low end. Music is mainly rock, but my iPod varies widely in genre
Also, do I need any special spec's in regard to wiring in (I have no idea what terminals the stock speakers use) or ohm rating, in order to be fine with the stock on-board amp?
I know they need brackets - either made from MDF or buy in from eBay US - but what speakers would be recommended to replace the stock ones? Mine are rattling/buzzing with even the slightest of , and to be honest, the system overall is lacking some low end.
I really CBA to go down the amp + sub route, and realise I won't get 6x9's sounding like a sub, but would like a pair that can handle and kick out some low end. Music is mainly rock, but my iPod varies widely in genre
Also, do I need any special spec's in regard to wiring in (I have no idea what terminals the stock speakers use) or ohm rating, in order to be fine with the stock on-board amp?
Clearly this introduces a problem as 99% of 6x9's only use 2 wires.
There was a set made by MB Quart that would have worked but I have no idea if they are still made?
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
13-07-2019, 12:25 PM #3Stock use dual voice coils, with separate coil for treble and bass - so 4 wires in total.
Clearly this introduces a problem as 99% of 6x9's only use 2 wires.
There was a set made by MB Quart that would have worked but I have no idea if they are still made?
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
16-07-2019, 07:39 AM #4MB Quart PVI 269 are the speakers I was thinking of - should be usable as a direct replacement for OEM rears.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
http://www.ebay.co.uk/itm/MB-Quart-PVL-2...384wt_1144
http://www.mbquart.com/premium_speakers.html
Thanks. Only thing I can find for those are PVL 269's, but they seem to be a 6x9 and a separate tweeter?
http://www.ebay.co.uk/itm/MB-Quart-PVL-2...384wt_1144
http://www.mbquart.com/premium_speakers.html
If you only use a normal 6x9 then you will loose either the bass or the treble.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
16-07-2019, 08:16 AM #7loose the xover. Then all 4 terminals are wired using the OEM wires as the amp has already acted as a xover.
If you only use a normal 6x9 then you will loose either the bass or the treble.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
All you do is connect them up as you would any other speaker - bass oem wires to to the 6x9 and treble oem wires to the tweeter. You never join the OEM +'s and -'s together - that won't work possibly blow your amp..... This is why you loose the x over the Lexus amp has an inbuilt x-over thus the 4 wires.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
16-07-2019, 08:27 AM #10No the MB's have 2 completely separate speakers with standard inputs on each.
All you do is connect them up as you would any other speaker - bass oem wires to to the 6x9 and treble oem wires to the tweeter. You never join the OEM +'s and -'s together - that won't work possibly blow your amp..... This is why you loose the x over the Lexus amp has an inbuilt x-over thus the 4 wires.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
1 Guest(s)
1 Guest(s)
Views 912
Last Post by
Views 18,870
Last Post by
Views 2,182
Last Post by
Views 669
Last Post by
Views 377
Last Post by
Views 662
Last Post by
Views 714
Last Post by