JapCarForum Cars, Cars, Cars! General Car Maintenance What have you done to your car today?

What have you done to your car today?

What have you done to your car today?

Pages (131): Previous 121 22 23 24 25131 Next  
Chris0121
Posting Freak
1,295
23-10-2019, 11:29 AM
Started fibreglassing the front splitter and thought might aswell remove the plate recess an smooth that over so I did hopefully get most of it some done this week

So your tuckin 15's, that's cute but come back to me when you get some proper size wheels
Chris0121
23-10-2019, 11:29 AM #221

Started fibreglassing the front splitter and thought might aswell remove the plate recess an smooth that over so I did hopefully get most of it some done this week


So your tuckin 15's, that's cute but come back to me when you get some proper size wheels

jimxms
Posting Freak
2,473
23-10-2019, 11:31 AM
I fitted a PS2 Slim to the LS460 at the weekend. Now the Lex is the envy of all my kids friends.
jimxms
23-10-2019, 11:31 AM #222

I fitted a PS2 Slim to the LS460 at the weekend. Now the Lex is the envy of all my kids friends.

sprinter2012
Posting Freak
2,484
23-10-2019, 11:51 AM
Chaos Met up with Sprinter and swapped exhausts over so my "definately staying standard" winter hack is now sporting a swanky Greddy Ti-C ever so subtle (not) zorst.
Cheers David, nice one!

Glad you like it, have you noticed any increase in power since fitting it? Because when I put it on I was sure it unleashed a few more horses higher up the RPMs, which I just put down to placebo effect because of the noise. But now it's off, the car feels noticeably slower again.

This guy is a top bloke though, put both our cars up on ramps and swapped the exhaust on both cars in less than a couple of hours Smile

jimxms I fitted a PS2 Slim to the LS460 at the weekend. Now the Lex is the envy of all my kids friends.

Well that's mission accomplished then surely? Nothing else to do after that. haha
sprinter2012
23-10-2019, 11:51 AM #223

Chaos Met up with Sprinter and swapped exhausts over so my "definately staying standard" winter hack is now sporting a swanky Greddy Ti-C ever so subtle (not) zorst.
Cheers David, nice one!

Glad you like it, have you noticed any increase in power since fitting it? Because when I put it on I was sure it unleashed a few more horses higher up the RPMs, which I just put down to placebo effect because of the noise. But now it's off, the car feels noticeably slower again.

This guy is a top bloke though, put both our cars up on ramps and swapped the exhaust on both cars in less than a couple of hours Smile

jimxms I fitted a PS2 Slim to the LS460 at the weekend. Now the Lex is the envy of all my kids friends.

Well that's mission accomplished then surely? Nothing else to do after that. haha

jimxms
Posting Freak
2,473
23-10-2019, 11:55 AM
sprinter2012 Glad you like it, have you noticed any increase in power since fitting it? Because when I put it on I was sure it unleashed a few more horses higher up the RPMs, which I just put down to placebo effect because of the noise. But now it's off, the car feels noticeably slower again.

This guy is a top bloke though, put both our cars up on ramps and swapped the exhaust on both cars in less than a couple of hours Smile

Wow has my trusty ol' Greddy Ti-C changed hands? I loved that zorst Big Grin

sprinter2012 Well that's mission accomplished then surely? Nothing else to do after that. haha

Absolutely. But it was worryingly easy to get most of the dash out on the LS, so I fear some more dash related mods may be happening soon Wink
jimxms
23-10-2019, 11:55 AM #224

sprinter2012 Glad you like it, have you noticed any increase in power since fitting it? Because when I put it on I was sure it unleashed a few more horses higher up the RPMs, which I just put down to placebo effect because of the noise. But now it's off, the car feels noticeably slower again.

This guy is a top bloke though, put both our cars up on ramps and swapped the exhaust on both cars in less than a couple of hours Smile

Wow has my trusty ol' Greddy Ti-C changed hands? I loved that zorst Big Grin

sprinter2012 Well that's mission accomplished then surely? Nothing else to do after that. haha

Absolutely. But it was worryingly easy to get most of the dash out on the LS, so I fear some more dash related mods may be happening soon Wink

Sparkystav
Administrator
14,683
23-10-2019, 12:14 PM
Bought a very rare 1gge engine.

Surprisingly lots of parts that i can use for the GTE engine. but more importantly the better looking cam covers ive spent 3 years trying to get hold of!

OutlawJapClub Admin Team
Sparkystav
23-10-2019, 12:14 PM #225

Bought a very rare 1gge engine.

Surprisingly lots of parts that i can use for the GTE engine. but more importantly the better looking cam covers ive spent 3 years trying to get hold of!


OutlawJapClub Admin Team

toxo
Posting Freak
4,843
23-10-2019, 12:20 PM
Sparkystav Bought a very rare 1gge engine.

Surprisingly lots of parts that i can use for the GTE engine. but more importantly the better looking cam covers ive spent 3 years trying to get hold of!

And what, please tell, do these cam covers look like? Big Grin
toxo
23-10-2019, 12:20 PM #226

Sparkystav Bought a very rare 1gge engine.

Surprisingly lots of parts that i can use for the GTE engine. but more importantly the better looking cam covers ive spent 3 years trying to get hold of!

And what, please tell, do these cam covers look like? Big Grin

el_bandido
Account not Activated
2,757
23-10-2019, 01:39 PM
+1 on that post, get pictures up!
el_bandido
23-10-2019, 01:39 PM #227

+1 on that post, get pictures up!

Chaos
Member
50
23-10-2019, 01:49 PM
sprinter2012 Glad you like it, have you noticed any increase in power since fitting it? Because when I put it on I was sure it unleashed a few more horses higher up the RPMs, which I just put down to placebo effect because of the noise. But now it's off, the car feels noticeably slower again

Absolutely chuffed to bits with it, definately picks up way faster. Was about to hand a eurobox it's nuts on a plate at my local set of lights but I hit the limiter a lot quicker than before so I'm ashamed to say it got the jump on me (just this once mind!). I have no concrete proof of power increase but its quicker up the box for sure and sounds the nuckin futs when it's pulling hard. Thanks again mate !
Chaos
23-10-2019, 01:49 PM #228

sprinter2012 Glad you like it, have you noticed any increase in power since fitting it? Because when I put it on I was sure it unleashed a few more horses higher up the RPMs, which I just put down to placebo effect because of the noise. But now it's off, the car feels noticeably slower again

Absolutely chuffed to bits with it, definately picks up way faster. Was about to hand a eurobox it's nuts on a plate at my local set of lights but I hit the limiter a lot quicker than before so I'm ashamed to say it got the jump on me (just this once mind!). I have no concrete proof of power increase but its quicker up the box for sure and sounds the nuckin futs when it's pulling hard. Thanks again mate !

Sparkystav
Administrator
14,683
23-10-2019, 03:01 PM
toxo And what, please tell, do these cam covers look like? Big Grin

el_bandido +1 on that post, get pictures up!

Heres the 1ggte ones and a set of 1ggze ones (notice big ugly turret on GTE ones and little turret on gze)

[Image: 1g_parts-012.jpg]

and a set of 1gge ones (no turret, just nice and smooth)

[Image: cam-cover1.jpg]

and if you smooth them out: mmmmmm

[Image: fE9KG.jpg]



Also the fly wheel is the same so ive a spare one then, the crank pulley should be useable, also it comes with a head overhaul kit which includes a lot of the same parts including the valve stem seals which i need for my spare head.
The cams are the better ones ive put in my own GTE so i can fit them to the spare engine.

just got to drive to Lincoln tomorrow and collect it.
Edited 04-12-2012, 12:40 AM by Sparkystav.

OutlawJapClub Admin Team
Sparkystav
23-10-2019, 03:01 PM #229

toxo And what, please tell, do these cam covers look like? Big Grin

el_bandido +1 on that post, get pictures up!

Heres the 1ggte ones and a set of 1ggze ones (notice big ugly turret on GTE ones and little turret on gze)

[Image: 1g_parts-012.jpg]

and a set of 1gge ones (no turret, just nice and smooth)

[Image: cam-cover1.jpg]

and if you smooth them out: mmmmmm

[Image: fE9KG.jpg]



Also the fly wheel is the same so ive a spare one then, the crank pulley should be useable, also it comes with a head overhaul kit which includes a lot of the same parts including the valve stem seals which i need for my spare head.
The cams are the better ones ive put in my own GTE so i can fit them to the spare engine.

just got to drive to Lincoln tomorrow and collect it.


OutlawJapClub Admin Team

el_bandido
Account not Activated
2,757
23-10-2019, 03:40 PM
nice! What are you doing with your spare engine? Building another is200 around it? :p
el_bandido
23-10-2019, 03:40 PM #230

nice! What are you doing with your spare engine? Building another is200 around it? :p

Pages (131): Previous 121 22 23 24 25131 Next  
Recently Browsing
 10 Guest(s)
Recently Browsing
 10 Guest(s)
Related Threads…
Replies 3
Views 925
27-01-2021, 01:37 AM
Last Post by Sparkystav