JapCarForum Cars, Cars, Cars! General Car Maintenance What have you done to your car today?

What have you done to your car today?

What have you done to your car today?

Pages (131): Previous 123 24 25 26 27131 Next  
el_bandido
Account not Activated
2,757
01-11-2019, 02:10 PM
looking where though? I've always got a hawk eye on ebay, but finding lexus breakers for specific bits is nigh on impossible.
el_bandido
01-11-2019, 02:10 PM #241

looking where though? I've always got a hawk eye on ebay, but finding lexus breakers for specific bits is nigh on impossible.

Sparkystav
Administrator
14,683
02-11-2019, 01:49 AM
what sort of stuff you after?

OutlawJapClub Admin Team
Sparkystav
02-11-2019, 01:49 AM #242

what sort of stuff you after?


OutlawJapClub Admin Team

el_bandido
Account not Activated
2,757
02-11-2019, 06:53 AM
I could probably do with a 1gfe sump among other bits, I'll have to make a list. I still need to drive up to you at some point and take a look, barclaycard are faffing me about with this loan still though. You free any time in Feb?
el_bandido
02-11-2019, 06:53 AM #243

I could probably do with a 1gfe sump among other bits, I'll have to make a list. I still need to drive up to you at some point and take a look, barclaycard are faffing me about with this loan still though. You free any time in Feb?

Sparkystav
Administrator
14,683
02-11-2019, 10:10 AM
Yeah mate. Just give me a shout. Having an op on the finger in January so well see how it goes.

It took me a long time to get a sump. I've managed to get 2 but had to buy a sump and pickup separate for one and a whole engine for the other lol

OutlawJapClub Admin Team
Sparkystav
02-11-2019, 10:10 AM #244

Yeah mate. Just give me a shout. Having an op on the finger in January so well see how it goes.

It took me a long time to get a sump. I've managed to get 2 but had to buy a sump and pickup separate for one and a whole engine for the other lol


OutlawJapClub Admin Team

el_bandido
Account not Activated
2,757
02-11-2019, 10:56 AM
I wouldn't mind buying a whole engine if it's sub £120, I don't want to drop big bucks as I'm still planning on upgrading the powerplant when the money flows again.

Good luck with the op! How hard is a timing belt replacement on the 1g by the way?
el_bandido
02-11-2019, 10:56 AM #245

I wouldn't mind buying a whole engine if it's sub £120, I don't want to drop big bucks as I'm still planning on upgrading the powerplant when the money flows again.

Good luck with the op! How hard is a timing belt replacement on the 1g by the way?

Sparkystav
Administrator
14,683
02-11-2019, 11:43 AM
Shouldn't be too hard, will have to read up on the setting of cams but fairly easy.

OutlawJapClub Admin Team
Sparkystav
02-11-2019, 11:43 AM #246

Shouldn't be too hard, will have to read up on the setting of cams but fairly easy.


OutlawJapClub Admin Team

toxo
Posting Freak
4,843
02-11-2019, 12:06 PM
Toyota make it fairly straight forward. Take all the gubbins off the front of the engine, make sure everything's lined up with the timing marks, take the old one off, put the new one on, turn the crank through 720 degrees and make sure everything lines up, put everything back together.

Provided the crank pulley bolt isn't a pain in the **** I reckon you could do the whole thing in less than 3hrs.
toxo
02-11-2019, 12:06 PM #247

Toyota make it fairly straight forward. Take all the gubbins off the front of the engine, make sure everything's lined up with the timing marks, take the old one off, put the new one on, turn the crank through 720 degrees and make sure everything lines up, put everything back together.

Provided the crank pulley bolt isn't a pain in the **** I reckon you could do the whole thing in less than 3hrs.

Sparkystav
Administrator
14,683
02-11-2019, 12:12 PM
toxo Toyota make it fairly straight forward. Take all the gubbins off the front of the engine, make sure everything's lined up with the timing marks, take the old one off, put the new one on, turn the crank through 720 degrees and make sure everything lines up, put everything back together.

Provided the crank pulley bolt isn't a pain in the **** I reckon you could do the whole thing in less than 3hrs.

Yeah I'd agree with that,

OutlawJapClub Admin Team
Sparkystav
02-11-2019, 12:12 PM #248

toxo Toyota make it fairly straight forward. Take all the gubbins off the front of the engine, make sure everything's lined up with the timing marks, take the old one off, put the new one on, turn the crank through 720 degrees and make sure everything lines up, put everything back together.

Provided the crank pulley bolt isn't a pain in the **** I reckon you could do the whole thing in less than 3hrs.

Yeah I'd agree with that,


OutlawJapClub Admin Team

el_bandido
Account not Activated
2,757
02-11-2019, 12:18 PM
John - what's the timing belt like on the 1uz, just out of interest?
el_bandido
02-11-2019, 12:18 PM #249

John - what's the timing belt like on the 1uz, just out of interest?

jay_russell
Posting Freak
3,005
02-11-2019, 12:29 PM
today i noticed that the new car has scratches on the dash board so they will be replacing that as well. tomorrow i will fit the flashing brake light units and wheel locks and then wait for it to be ready for delivery
jay_russell
02-11-2019, 12:29 PM #250

today i noticed that the new car has scratches on the dash board so they will be replacing that as well. tomorrow i will fit the flashing brake light units and wheel locks and then wait for it to be ready for delivery

Pages (131): Previous 123 24 25 26 27131 Next  
Recently Browsing
 5 Guest(s)
Recently Browsing
 5 Guest(s)
Related Threads…
Replies 3
Views 925
27-01-2021, 01:37 AM
Last Post by Sparkystav