JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Engine & Transmission lightweight flywheels

lightweight flywheels

lightweight flywheels

Pages (3): Previous 1 2 3 Next
Sparkystav
Administrator
14,683
19-12-2019, 06:00 AM
#11
Nope it will bolt straight up. So will the clutch.
The GTE clutch is slightly better as its friction plate is slightly larger diameter but both work.

Here's a pic

[Image: ytu9edy4.jpg]

OutlawJapClub Admin Team
Sparkystav
19-12-2019, 06:00 AM #11

Nope it will bolt straight up. So will the clutch.
The GTE clutch is slightly better as its friction plate is slightly larger diameter but both work.

Here's a pic

[Image: ytu9edy4.jpg]


OutlawJapClub Admin Team

Sparkystav
Administrator
14,683
19-12-2019, 06:00 AM
#12
The altezza/mr2 is 8 bolt.

OutlawJapClub Admin Team
Sparkystav
19-12-2019, 06:00 AM #12

The altezza/mr2 is 8 bolt.


OutlawJapClub Admin Team

el_bandido
Account not Activated
2,757
19-12-2019, 07:18 AM
#13
Nice one, thanks Stav!
el_bandido
19-12-2019, 07:18 AM #13

Nice one, thanks Stav!

toxo
Posting Freak
4,843
19-12-2019, 07:29 AM
#14
I wouldn't go much lighter than 8KG. I had a 6KG on the MR2 and it made it so easy to stall and adversely affected the idle control, as the revs would drop too quickly when you put your foot on the clutch.
toxo
19-12-2019, 07:29 AM #14

I wouldn't go much lighter than 8KG. I had a 6KG on the MR2 and it made it so easy to stall and adversely affected the idle control, as the revs would drop too quickly when you put your foot on the clutch.

el_bandido
Account not Activated
2,757
19-12-2019, 08:49 AM
#15
I think I'm going to have to actually service this car properly so I want to change a few bits while I'm sorting everything out. Found a cheap fairly low mileage gearbox with a new clutch, attached to an engine that's gone pop for a very good price. Might see if I can find a 1g-gte, put the internals in the new engine and just drop everything back into my car wholesale. Should solve all of my current problems for quite a low amount of money.
el_bandido
19-12-2019, 08:49 AM #15

I think I'm going to have to actually service this car properly so I want to change a few bits while I'm sorting everything out. Found a cheap fairly low mileage gearbox with a new clutch, attached to an engine that's gone pop for a very good price. Might see if I can find a 1g-gte, put the internals in the new engine and just drop everything back into my car wholesale. Should solve all of my current problems for quite a low amount of money.

PatrickM
Junior Member
4
19-12-2019, 09:52 AM
#16
Hi,

It was me who bought the Flywheel from Stav and it bolts straight on.

I dont feel any difference in pullingpower uphill, the car revs up and down alot faster and it feels quicker. The car is smoother with this flywheel.
This flywheel should deffinatly have been in the car stock Tongue

I put in a clutch with spring and rubber dampers, to compensate for the lack of the dualmass flywheel Smile

Pulling off from a standstill is the same as the stock flywheel, i feel no difference Smile

// Patrick M
PatrickM
19-12-2019, 09:52 AM #16

Hi,

It was me who bought the Flywheel from Stav and it bolts straight on.

I dont feel any difference in pullingpower uphill, the car revs up and down alot faster and it feels quicker. The car is smoother with this flywheel.
This flywheel should deffinatly have been in the car stock Tongue

I put in a clutch with spring and rubber dampers, to compensate for the lack of the dualmass flywheel Smile

Pulling off from a standstill is the same as the stock flywheel, i feel no difference Smile

// Patrick M

Sparkystav
Administrator
14,683
19-12-2019, 11:04 AM
#17
Glad your happy with it mate. Bet your glad you asked about it now as I didn't plan on selling it. Lol

OutlawJapClub Admin Team
Sparkystav
19-12-2019, 11:04 AM #17

Glad your happy with it mate. Bet your glad you asked about it now as I didn't plan on selling it. Lol


OutlawJapClub Admin Team

Ddahc
Junior Member
1
27-06-2021, 10:05 AM
#18
Does anyone know or have anyway of sourcing them?
Ddahc
27-06-2021, 10:05 AM #18

Does anyone know or have anyway of sourcing them?

Sparkystav
Administrator
14,683
27-06-2021, 10:39 AM
#19
There's a guy on eBay selling them but they are stupidly expensive IMHO.

OutlawJapClub Admin Team
Sparkystav
27-06-2021, 10:39 AM #19

There's a guy on eBay selling them but they are stupidly expensive IMHO.


OutlawJapClub Admin Team

el_bandido
Account not Activated
2,757
27-06-2021, 10:42 AM
#20
nevermind
Edited 08-08-2014, 08:17 PM by el_bandido.
el_bandido
27-06-2021, 10:42 AM #20

nevermind

Pages (3): Previous 1 2 3 Next
Recently Browsing
 2 Guest(s)
Recently Browsing
 2 Guest(s)
Related Threads…