Little write up on the evolution of my car
Little write up on the evolution of my car
So your tuckin 15's, that's cute but come back to me when you get some proper size wheels
Was bored Thismornin and thought I'd have a read from the beginning of this thread mate its seriously awesome the work that's gone in is amazing can't wait to see it at a show again so I can have a proper look round it
So your tuckin 15's, that's cute but come back to me when you get some proper size wheels
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
23-02-2020, 10:29 AM #1,103Cheers mate, its a lot of hard work!
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
A few pics:
Ready to go in
![[Image: uheruqe9.jpg]](http://img.tapatalk.com/d/13/04/06/uheruqe9.jpg)
Gently does it
![[Image: eha2a5er.jpg]](http://img.tapatalk.com/d/13/04/06/eha2a5er.jpg)
Tight!
![[Image: atyhygeq.jpg]](http://img.tapatalk.com/d/13/04/06/atyhygeq.jpg)
Pretty much in!
![[Image: ene8ymab.jpg]](http://img.tapatalk.com/d/13/04/06/ene8ymab.jpg)
![[Image: y6arupa4.jpg]](http://img.tapatalk.com/d/13/04/06/y6arupa4.jpg)
Too tight!
![[Image: abagyme3.jpg]](http://img.tapatalk.com/d/13/04/06/abagyme3.jpg)
Err a Little hammer work
![[Image: jy4y3amu.jpg]](http://img.tapatalk.com/d/13/04/06/jy4y3amu.jpg)
Sits a little better!
![[Image: uju4y7aj.jpg]](http://img.tapatalk.com/d/13/04/06/uju4y7aj.jpg)
Unfortunately its still not in perfect. I have 3 options
1- get Hurricane to remake the adapter a cm shorter as I still have the cad drawing Sprinter made for me, will cost materials and Petes time, and I need a fast turn around (2 weeks ish)
2- get the manifold shortened or angled more, will cost for the alloy to be welded and again I need a quick turnaround
3- take the engine back out and take a bigger hammer to the car whilst ensuring the top suspension arm still moves freely.
I think I'll try option 3 lol then respray that part.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
23-02-2020, 10:39 AM #1,104Right this afternoon I had one mission, get the engine back in! But will the manifold fit.....
A few pics:
Ready to go in
Gently does it
Tight!
Pretty much in!
Too tight!
Err a Little hammer work
Sits a little better!
Unfortunately its still not in perfect. I have 3 options
1- get Hurricane to remake the adapter a cm shorter as I still have the cad drawing Sprinter made for me, will cost materials and Petes time, and I need a fast turn around (2 weeks ish)
2- get the manifold shortened or angled more, will cost for the alloy to be welded and again I need a quick turnaround
3- take the engine back out and take a bigger hammer to the car whilst ensuring the top suspension arm still moves freely.
I think I'll try option 3 lol then respray that part.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Jimbob-T-Lex
23-02-2020, 10:44 AM #1,105love it mate defin option 3!! your engine bay is looking clean aswell mate nice work
Sent from my LT26i using Xparent Skyblue Tapatalk 2
sprinter2012
23-02-2020, 10:53 AM #1,106That's a ****** about the manifold! I was going to suggest just getting the adapter machined down, but that would probably put the inlet ports out of line because the slots are angled.
Sent from my LT26i using Xparent Skyblue Tapatalk 2
sprinter2012 That's a ****** about the manifold! I was going to suggest just getting the adapter machined down, but that would probably put the inlet ports out of line because the slots are angled.
Ay that was my thought as well. Will see if the hammer works out.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
23-02-2020, 10:59 AM #1,107sprinter2012 That's a ****** about the manifold! I was going to suggest just getting the adapter machined down, but that would probably put the inlet ports out of line because the slots are angled.
Ay that was my thought as well. Will see if the hammer works out.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
i like the hammer idea mate you could probably fly that bit of paint in without to much effort especially where its positioned you could probably do it with the engine in situe as well (if you make enough of a dent lol)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
23-02-2020, 11:31 AM #1,110Gonna take it out, it's just as simple and I can really throw the hammer at it then lol
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
7 Guest(s)
7 Guest(s)
Views 281
Last Post by