Little write up on the evolution of my car
Little write up on the evolution of my car
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
26-02-2020, 03:58 AM #1,113That's my latest plan mate. Sledge didn't work so can and weld is the next plan
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Still working on the inlet, getting it shortened so it fits now.
Car will be going on axle stands this weekendto fit new fuel pump, swirl pot and lines.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
07-03-2020, 01:25 PM #1,115Erm nothing to say at the moment, I've remade the speedo area, just awaiting my new boost gauge.
Still working on the inlet, getting it shortened so it fits now.
Car will be going on axle stands this weekendto fit new fuel pump, swirl pot and lines.
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
![[Image: ze4atyza.jpg]](http://img.tapatalk.com/d/13/04/27/ze4atyza.jpg)
![[Image: 9u9ehu2u.jpg]](http://img.tapatalk.com/d/13/04/27/9u9ehu2u.jpg)
Still didn't work! So today I welded it back together and began filling it:
![[Image: amyputun.jpg]](http://img.tapatalk.com/d/13/04/27/amyputun.jpg)
![[Image: 8uqy7e9y.jpg]](http://img.tapatalk.com/d/13/04/27/8uqy7e9y.jpg)
Will hopefully be back to normal by end of the weekend.
Plan c is this:
![[Image: ymyzeman.jpg]](http://img.tapatalk.com/d/13/04/27/ymyzeman.jpg)
![[Image: amu2u7u7.jpg]](http://img.tapatalk.com/d/13/04/27/amu2u7u7.jpg)
![[Image: qa2anabe.jpg]](http://img.tapatalk.com/d/13/04/27/qa2anabe.jpg)
Will get it welded together tomorrow. Smoothed a few dodgy welds out as well whilst it was apart.
Big thanks to my mate Adz for the help sorting this issue.
Also fitted the FPR in place, you can see the multi plug in the background
![[Image: a3u9uty7.jpg]](http://img.tapatalk.com/d/13/04/27/a3u9uty7.jpg)
New external fuel pump and swirl pot installed
![[Image: pu8udy7u.jpg]](http://img.tapatalk.com/d/13/04/27/pu8udy7u.jpg)
![[Image: 4a9yne9u.jpg]](http://img.tapatalk.com/d/13/04/27/4a9yne9u.jpg)
![[Image: amedepu7.jpg]](http://img.tapatalk.com/d/13/04/27/amedepu7.jpg)
Excuse the colour, it was the only colour he'd powdercoat it for free in lol. It was originally meant to go under the car with the pump and filter but wouldn't fit.
Also ran my new supply line but difficult to photograph that
Dash is all back together:
![[Image: ebe8ubu2.jpg]](http://img.tapatalk.com/d/13/04/27/ebe8ubu2.jpg)
![[Image: guru9eja.jpg]](http://img.tapatalk.com/d/13/04/27/guru9eja.jpg)
![[Image: hamavase.jpg]](http://img.tapatalk.com/d/13/04/27/hamavase.jpg)
New boost gauge in dash as I sold the pillar mount. The four LEDs are for reverse signal (no beeper anymore), RLTC activation, meth tank empty, meth system active.
Also just because I can:
![[Image: ehypaqu7.jpg]](http://img.tapatalk.com/d/13/04/27/ehypaqu7.jpg)
Removed the rear interior door handles and replaced them with screens. I've fitted door poppers with the buttons by the front centre armrest.
Also reinsured the car with Adrian Flux this year. Just need to finish the manifold and run a couple more fuel lines and then the engine can go in and ready to go-ish (still got to fit the new intercooler and radiator)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
15-03-2020, 01:25 PM #1,116Well ive got a few pics for an update, after the hammering didn't work we tried this:
Still didn't work! So today I welded it back together and began filling it:
Will hopefully be back to normal by end of the weekend.
Plan c is this:
Will get it welded together tomorrow. Smoothed a few dodgy welds out as well whilst it was apart.
Big thanks to my mate Adz for the help sorting this issue.
Also fitted the FPR in place, you can see the multi plug in the background
New external fuel pump and swirl pot installed
Excuse the colour, it was the only colour he'd powdercoat it for free in lol. It was originally meant to go under the car with the pump and filter but wouldn't fit.
Also ran my new supply line but difficult to photograph that
Dash is all back together:
New boost gauge in dash as I sold the pillar mount. The four LEDs are for reverse signal (no beeper anymore), RLTC activation, meth tank empty, meth system active.
Also just because I can:
Removed the rear interior door handles and replaced them with screens. I've fitted door poppers with the buttons by the front centre armrest.
Also reinsured the car with Adrian Flux this year. Just need to finish the manifold and run a couple more fuel lines and then the engine can go in and ready to go-ish (still got to fit the new intercooler and radiator)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
JayJay1374
15-03-2020, 02:46 PM #1,117Top work as per usual mate!
It's ashame cutting the arch out didn't work!
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
Looking ace mate . Some exceptional work. PS can you pm me your address so I can post your present to you :biggrin:
Lexus IS200 Mods--TTE Supercharger, Tein Superstreet Coilovers & EDFC, 6000K HID Lights, HKS Silent High Power Exhaust, DBA Front Discs, Kenwood DNX9240 Head Unit, 19" Rims, TRD Kit, FIGS Bonnet Struts, Greddy Pillar Pod & Defi Gauges, TTE Red ARBS . And Been To WIM twice
10 Guest(s)
10 Guest(s)
Views 281
Last Post by