supercharger help.

JapCarForum Cars, Cars, Cars! Help Topics - Submit Your Help For Other Members! supercharger help.

supercharger help.

Pages (2): 1 2 Next

daveo
Member

06-02-2021, 09:18 AM

can someone please help here explain a few things. the car is nearly ready for remapping. have supercharger mounted and hardpiped. i did not put anything on the bypass valve as i was thinking i could run without it.....can i run without it or am i better to install one. the cable off of the valve is broken but the spring is ok. do i have to replace this cord?? the car is drift spec .i am using a patrick black box. will this be ok with a 160mm pulley.?? any help greatly appreciated as im at a standstill at the moment.

daveo

06-02-2021, 09:18 AM #1

reganlives
Posting Freak

1,230

06-02-2021, 11:17 AM

You will need to uprate your injectors to run a larger pulley and in place of a bypass could have a blow off valve.

Sent from my JY-G3 using Tapatalk 2

reganlives

06-02-2021, 11:17 AM #2

You will need to uprate your injectors to run a larger pulley and in place of a bypass could have a blow off valve.

Sent from my JY-G3 using Tapatalk 2

daveo
Member

06-02-2021, 11:22 AM

i would leave the bypass open so and put a blow off valve over off of the trottle body ??

are you sure i need uprated injectors?? thought it would run fine with a fuel pressure reg??

daveo

06-02-2021, 11:22 AM #3

i would leave the bypass open so and put a blow off valve over off of the trottle body ??

are you sure i need uprated injectors?? thought it would run fine with a fuel pressure reg??

reganlives
Posting Freak

1,230

06-02-2021, 11:48 AM

Not 100% sure on the location of the bov. Mine is near the inter cooler just behind the bumper but my supercharger isn't running yet as still need a couple of bits but otherwise its all fitted. I'll be running a 145mm pulley and the best match for that are 1zzfe injectors. A lot of people will be able to help you mate. If you want to run a 160mm pulley though I think you may be better of with an emanage then get it fully mapped. You'all need to remove your pre cats as well as people have had them melt. There's some decat manifolds on eBay at the moment.

Sent from my JY-G3 using Tapatalk 2

reganlives

06-02-2021, 11:48 AM #4

daveo
Member

06-02-2021, 12:08 PM

i have my manifold decatted.so we are all good there.oh god.........anyone got any idea what injectors go with the 160 pulley or can i run on originals?? e manage is the plan next year just want to get drifting this year with it.