New Member hoping to install sc to my is200
New Member hoping to install sc to my is200
Thanks all hope I get some feedback
Hi everyone I've just joined and going for some Intel on installing a eaton m62 supercharger on my lexus is200 I.e what parts are necessary for the install etc I've already got the supercharger just want to know what is next
Thanks all hope I get some feedback
But to give a fast break down
Supercharger
Custom made cradle
Custom made inlet and outlet
Blackbox for ecu
Fmic
Bypass valve
Filter
Tensioner
Belt
Main pulley
A load of pipework
A load of silicone bends
And clamps
Sent from my GT-I9505 using Tapatalk
![[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]](http://i1227.photobucket.com/albums/ee440/davis5835/Mobile%20Uploads/FB_IMG_1474048273787_zpsnbfq6a3s.jpg)
Welcome mate there are plenty of threads on this already.
But to give a fast break down
Supercharger
Custom made cradle
Custom made inlet and outlet
Blackbox for ecu
Fmic
Bypass valve
Filter
Tensioner
Belt
Main pulley
A load of pipework
A load of silicone bends
And clamps
Sent from my GT-I9505 using Tapatalk
Sent from my GT-I9505 using Tapatalk
Also does the tte kit come with the black box as I've not seen this with the kids advertised before
All input welcome I'm new to this ......
Thanks Lexuspat I can source most things but the hardest part is getting the cradle I was going to fabricate my own based on the tte one obviously wont be exact but I cant see why it wont work. As long as it has strength and allows the inlet and outlet to flow past nicely
Also does the tte kit come with the black box as I've not seen this with the kids advertised before
All input welcome I'm new to this ......
The slk pulley wont work trust me.
Im 80% through making my own and ive researched every pulley out there. It has to be made.
With regards the cradle u really need an oem one and a jig made from that even 1mm out the belt with shred and u wont be able to use any power. I have a jig here which is a direct copy
Sent from my GT-I9505 using Tapatalk
Black box is what most use and there made by a member on here.
The slk pulley wont work trust me.
Im 80% through making my own and ive researched every pulley out there. It has to be made.
With regards the cradle u really need an oem one and a jig made from that even 1mm out the belt with shred and u wont be able to use any power. I have a jig here which is a direct copy
Sent from my GT-I9505 using Tapatalk
3 Guest(s)
3 Guest(s)
Views 269
Last Post by
Views 281
Last Post by
Views 348
Last Post by
Views 533
Last Post by
Views 159
Last Post by
Views 147
Last Post by