JapCarForum Cars, Cars, Cars! General Car Maintenance What have you done to your car today?

What have you done to your car today?

What have you done to your car today?

Pages (131): Previous 1121 122 123 124 125131 Next  
Wayne
Senior Member
607
24-01-2023, 01:05 PM
Moley Remember to wire brush all the old **** out from the arches before you roll them. And use a heat gun to soften the paint when rolling them

Thanks for the tips. Do you have much experience with the rollers? I couldn't tell the difference between the £40 ones and the more expensive ones, then again they were ebay pictures. Is there anything I should be looking out for when purchasing one? Cuz no doubt I'll have plenty of 'mates' wanting to borrow it, instead of using a scaffold bar while rolling forward and backwards...
Wayne
24-01-2023, 01:05 PM #1,221

Moley Remember to wire brush all the old **** out from the arches before you roll them. And use a heat gun to soften the paint when rolling them

Thanks for the tips. Do you have much experience with the rollers? I couldn't tell the difference between the £40 ones and the more expensive ones, then again they were ebay pictures. Is there anything I should be looking out for when purchasing one? Cuz no doubt I'll have plenty of 'mates' wanting to borrow it, instead of using a scaffold bar while rolling forward and backwards...

Sparkystav
Administrator
14,683
24-01-2023, 01:46 PM
They are all pretty much the same, just take your time, small increments, and make sure you heat the area

OutlawJapClub Admin Team
Sparkystav
24-01-2023, 01:46 PM #1,222

They are all pretty much the same, just take your time, small increments, and make sure you heat the area


OutlawJapClub Admin Team

Lexuspat
Administrator
6,827
28-01-2023, 09:51 AM
Well yesterday I finally got round to replacing the water pump and cambelt on the landrover what a pig of a job that was.

And today started tinting the rear windows

Sent from my SM-G920F using Tapatalk

[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team
Lexuspat
28-01-2023, 09:51 AM #1,223

Well yesterday I finally got round to replacing the water pump and cambelt on the landrover what a pig of a job that was.

And today started tinting the rear windows

Sent from my SM-G920F using Tapatalk


[Image: FB_IMG_1474048273787_zpsnbfq6a3s.jpg]

OutlawJapClub Admin Team

Sparkystav
Administrator
14,683
28-01-2023, 11:12 AM
Got my ecu back with a bigger map sensor fitted,

Also bought a new alarm/remote start/keyless entry module, already got one that works but wanted something different

OutlawJapClub Admin Team
Sparkystav
28-01-2023, 11:12 AM #1,224

Got my ecu back with a bigger map sensor fitted,

Also bought a new alarm/remote start/keyless entry module, already got one that works but wanted something different


OutlawJapClub Admin Team

Wayne
Senior Member
607
30-01-2023, 10:27 AM
Finally got all 4 wheels the same. I like it.

[Image: 2ef2q7b.jpg]

Also rolled my arches with my fancy new arch roller. Pain in the **** as you have to take the caliper off to reach fully around the arch. Cracked the paint a bit, but meh, touch up paint will solve that. Combination of impatience and noobness. Also failed at fitting my auto mirror folding thing. Sad Good day/bad day!
Wayne
30-01-2023, 10:27 AM #1,225

Finally got all 4 wheels the same. I like it.

[Image: 2ef2q7b.jpg]

Also rolled my arches with my fancy new arch roller. Pain in the **** as you have to take the caliper off to reach fully around the arch. Cracked the paint a bit, but meh, touch up paint will solve that. Combination of impatience and noobness. Also failed at fitting my auto mirror folding thing. Sad Good day/bad day!

Sparkystav
Administrator
14,683
30-01-2023, 12:37 PM
Doh! Did you try the bits I messaged you about?
Pm me where we're at.

OutlawJapClub Admin Team
Sparkystav
30-01-2023, 12:37 PM #1,226

Doh! Did you try the bits I messaged you about?
Pm me where we're at.


OutlawJapClub Admin Team

Wayne
Senior Member
607
30-01-2023, 01:09 PM
Yeah, but it seems to blow a fuse every now and again. So I've took it out for the time being. It's been a busy weekend and I cba with it. I'm gonna triple check everything before the next install when I have a bit more time on my hands. No doubt I'll be PMing you about something I've broken again, but thanks for the help so far, we must be close to cracking it. Probably something stupid, I shoudn't be allowed near car electrics.
Wayne
30-01-2023, 01:09 PM #1,227

Yeah, but it seems to blow a fuse every now and again. So I've took it out for the time being. It's been a busy weekend and I cba with it. I'm gonna triple check everything before the next install when I have a bit more time on my hands. No doubt I'll be PMing you about something I've broken again, but thanks for the help so far, we must be close to cracking it. Probably something stupid, I shoudn't be allowed near car electrics.

Sparkystav
Administrator
14,683
30-01-2023, 01:36 PM
No worries, worse case you come to a show with the club and I fit it there....

OutlawJapClub Admin Team
Sparkystav
30-01-2023, 01:36 PM #1,228

No worries, worse case you come to a show with the club and I fit it there....


OutlawJapClub Admin Team

Wayne
Senior Member
607
05-02-2023, 10:58 AM
Sparkystav No worries, worse case you come to a show with the club and I fit it there....

Well the car will be at Japfest Wink I'll bring some tape and cutters just in case Tongue Me and Electricity don't really get on. You can't taste it, you can't smell it, you can't see it, you can only feel it, by which time it's too late!

Bolting and unbolting I can do though.

[Image: 2ykbcle.jpg]

Came today, fitted today, might leave em white, may paint em a different colour not sure yet, it might be a bit too yellow in the engine bay if I do em the colour of the car. Just need them Anti Roll bars, the rear strut bar, a million and one bushes, and those fancy Ikeya arms now...
Wayne
05-02-2023, 10:58 AM #1,229

Sparkystav No worries, worse case you come to a show with the club and I fit it there....

Well the car will be at Japfest Wink I'll bring some tape and cutters just in case Tongue Me and Electricity don't really get on. You can't taste it, you can't smell it, you can't see it, you can only feel it, by which time it's too late!

Bolting and unbolting I can do though.

[Image: 2ykbcle.jpg]

Came today, fitted today, might leave em white, may paint em a different colour not sure yet, it might be a bit too yellow in the engine bay if I do em the colour of the car. Just need them Anti Roll bars, the rear strut bar, a million and one bushes, and those fancy Ikeya arms now...

Sparkystav
Administrator
14,683
06-02-2023, 02:06 AM
No worries I'll sort it!

OutlawJapClub Admin Team
Sparkystav
06-02-2023, 02:06 AM #1,230

No worries I'll sort it!


OutlawJapClub Admin Team

Pages (131): Previous 1121 122 123 124 125131 Next  
Recently Browsing
 7 Guest(s)
Recently Browsing
 7 Guest(s)
Related Threads…
Replies 3
Views 929
27-01-2021, 01:37 AM
Last Post by Sparkystav