JapCarForum General Discussions New Members Hello from The Transporter and his IS200

Hello from The Transporter and his IS200

Hello from The Transporter and his IS200

Pages (2): 1 2 Next
The Transporter
Junior Member
9
14-08-2023, 01:57 PM
#1
Hello folks, it's nice to meet you all. I've had my 2005 IS200 from new and until a couple of months ago was planning on moving it on and buying something new but I couldn't find anything that I liked as much and a motoring holiday to Spain was getting closer...The solution was obvious, pull it apart, treat any scruffy bits, waxoyl it and get it off to the paintshop for a bit of fresh paint... Two days before the holiday all was together and a good coat of wax to boot...She still drives as nicely as the day I collected her and for the much beloved and I was the perfect car for our short holiday.

Now I'm back I can't help feeling that she needs a little more power and have been reading the sections on supercharging, so I shall start collecting my parts for the conversion hopefully to be completed before our road trip to Kiev later next year
The Transporter
14-08-2023, 01:57 PM #1

Hello folks, it's nice to meet you all. I've had my 2005 IS200 from new and until a couple of months ago was planning on moving it on and buying something new but I couldn't find anything that I liked as much and a motoring holiday to Spain was getting closer...The solution was obvious, pull it apart, treat any scruffy bits, waxoyl it and get it off to the paintshop for a bit of fresh paint... Two days before the holiday all was together and a good coat of wax to boot...She still drives as nicely as the day I collected her and for the much beloved and I was the perfect car for our short holiday.

Now I'm back I can't help feeling that she needs a little more power and have been reading the sections on supercharging, so I shall start collecting my parts for the conversion hopefully to be completed before our road trip to Kiev later next year

Wayne
Senior Member
607
14-08-2023, 02:12 PM
#2
Welcome to OJC
Wayne
14-08-2023, 02:12 PM #2

Welcome to OJC

RCarter
Senior Member
398
14-08-2023, 02:19 PM
#3
yeah man, welcome!


Sent from my iPhone using Tapatalk
RCarter
14-08-2023, 02:19 PM #3

yeah man, welcome!


Sent from my iPhone using Tapatalk

Sparkystav
Administrator
14,683
14-08-2023, 10:47 PM
#4
Welcome mate! Well the info you need is certainly here!


Sent from my iPad using Tapatalk

OutlawJapClub Admin Team
Sparkystav
14-08-2023, 10:47 PM #4

Welcome mate! Well the info you need is certainly here!


Sent from my iPad using Tapatalk


OutlawJapClub Admin Team

The Transporter
Junior Member
9
15-08-2023, 10:07 AM
#5
Thanks for the welcome guys....Stav, there certainly is a wealth of information and just as importantly supplies of unique parts for the project, i'm thinking compressor brackets and electronic giggle boxes to control the fuelling..
The Transporter
15-08-2023, 10:07 AM #5

Thanks for the welcome guys....Stav, there certainly is a wealth of information and just as importantly supplies of unique parts for the project, i'm thinking compressor brackets and electronic giggle boxes to control the fuelling..

Sparkystav
Administrator
14,683
15-08-2023, 11:54 AM
#6
Patrick and Patrick!


Sent from my iPad using Tapatalk

OutlawJapClub Admin Team
Sparkystav
15-08-2023, 11:54 AM #6

Patrick and Patrick!


Sent from my iPad using Tapatalk


OutlawJapClub Admin Team

The Transporter
Junior Member
9
15-08-2023, 01:01 PM
#7
He he.. Already made a bee line for their very informative posts.
The Transporter
15-08-2023, 01:01 PM #7

He he.. Already made a bee line for their very informative posts.

The Transporter
Junior Member
9
16-08-2023, 02:05 PM
#8
A brief look into fitting a supercharger raises a couple of minor issues, the inlet and outlet for the super charger...Does anyone here have a supplier? and the lack of air boxes, they all seem to be hiding in peoples lofts.. It appears from the photos of the air boxes that they may be made of GRP or carbon fibre. Is this correct?
The Transporter
16-08-2023, 02:05 PM #8

A brief look into fitting a supercharger raises a couple of minor issues, the inlet and outlet for the super charger...Does anyone here have a supplier? and the lack of air boxes, they all seem to be hiding in peoples lofts.. It appears from the photos of the air boxes that they may be made of GRP or carbon fibre. Is this correct?

Wayne
Senior Member
607
16-08-2023, 09:03 PM
#9
Inlets and outlets need to be made up unless you can find some second hand. As for the air filter you can use a aftermarket pod filter. You'd be hard pushed to find a TTE one at a price you'd want to pay.
Wayne
16-08-2023, 09:03 PM #9

Inlets and outlets need to be made up unless you can find some second hand. As for the air filter you can use a aftermarket pod filter. You'd be hard pushed to find a TTE one at a price you'd want to pay.

The Transporter
Junior Member
9
17-08-2023, 02:24 AM
#10
That's why I was curious about the material that the TTE airbox was made from as it appears to be a reasonably straightforward project to copy that shape in reinforced plastic and to design the filter around a reasonable common "Off the shelf" panel filter.. Which leads me onto the inlet and outlet which may or may not be cast in high temperature casting resin with metal inserts for pipe connection and bolt holes..
The Transporter
17-08-2023, 02:24 AM #10

That's why I was curious about the material that the TTE airbox was made from as it appears to be a reasonably straightforward project to copy that shape in reinforced plastic and to design the filter around a reasonable common "Off the shelf" panel filter.. Which leads me onto the inlet and outlet which may or may not be cast in high temperature casting resin with metal inserts for pipe connection and bolt holes..

Pages (2): 1 2 Next
Recently Browsing
 2 Guest(s)
Recently Browsing
 2 Guest(s)
Related Threads…
Replies 12
Views 346
04-08-2023, 07:03 AM
Last Post by Wayne
Replies 8
Views 234
03-12-2021, 10:45 AM
Last Post by kevinsgs300
Replies 188
Views 4,144
28-07-2021, 11:46 AM
Last Post by Lexuspat
Replies 9
Views 339
21-07-2021, 11:49 PM
Last Post by Rabster
Replies 6
Views 215
16-05-2021, 08:58 PM
Last Post by 350zLad
Replies 7
Views 268
27-12-2020, 02:17 PM
Last Post by Jimbob-T-Lex
Replies 8
Views 298
13-12-2020, 01:12 AM
Last Post by Rabster
Replies 6
Views 160
13-12-2020, 01:00 AM
Last Post by Rabster