Little write up on the evolution of my car
Little write up on the evolution of my car
New manifold
![[Image: 0dd9df47bc895c436f90ee5e8a7623b5.jpg]](http://uploads.tapatalk-cdn.com/20161113/0dd9df47bc895c436f90ee5e8a7623b5.jpg)
![[Image: fcc986b5a64acb696c79bf0bfcf4ee6d.jpg]](http://uploads.tapatalk-cdn.com/20161113/fcc986b5a64acb696c79bf0bfcf4ee6d.jpg)
Current dash situation
![[Image: 610db1783d99d67f400b65d859dcbe36.jpg]](http://uploads.tapatalk-cdn.com/20161113/610db1783d99d67f400b65d859dcbe36.jpg)
The headgasket a company sent me when I ordered one for my 6 cylinder engine!
![[Image: dd720dde8ee61aa97a21e4ff1db6ddba.jpg]](http://uploads.tapatalk-cdn.com/20161113/dd720dde8ee61aa97a21e4ff1db6ddba.jpg)
Sent from my iPad using Tapatalk
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
03-10-2023, 02:12 AM #1,371Few pics:
New manifold
Current dash situation
The headgasket a company sent me when I ordered one for my 6 cylinder engine!
Sent from my iPad using Tapatalk
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
New steering column is nearly finished and mounting is close.
Nearly finished machining the new block before it's honed and I can rebuild it.
Sent from my iPad using Tapatalk
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
27-10-2023, 02:28 PM #1,373Well shiny new manifold fits, and I've test fitted the engine in the car and there's no clearance issues. But will need to remake the wastegate mount and downpipe.
New steering column is nearly finished and mounting is close.
Nearly finished machining the new block before it's honed and I can rebuild it.
Sent from my iPad using Tapatalk
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sent from my iPhone using Tapatalk
Jimbob-T-Lex
27-10-2023, 11:24 PM #1,374Good work mate can't wait to see at jap fest
Sent from my iPhone using Tapatalk
dimis Any pics of the new engine bay mate?
Not had it sprayed yet mate,
Mocked all the brake lines up though.
![[Image: 2b26dd7ce0b67aa3735defbd4450935a.jpg]](http://uploads.tapatalk-cdn.com/20161212/2b26dd7ce0b67aa3735defbd4450935a.jpg)
Sent from my iPad using Tapatalk
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
01-11-2023, 12:09 PM #1,376dimis Any pics of the new engine bay mate?
Not had it sprayed yet mate,
Mocked all the brake lines up though.
Sent from my iPad using Tapatalk
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
This winter I have spent a ridiculous amount of money on new bits for the car-
New ecu
New throttle body
New turbo manifold
Lots of new fittings and connectors
Full engine rebuild so new seals, bearings, etc.
Then I decided a couple of weeks ago I wanted to finally take the plunge and get forged pistons as well.
So a fire sale ensued of my GTE spares (still one set of rods left btw) and I handed the money over to PerformanceUnlimited to pass to JE pistons.
Well today I got home from work to these!
![[Image: f9e6e0b1bec7ef104b9e5d4566633b8d.jpg]](https://uploads.tapatalk-cdn.com/20170223/f9e6e0b1bec7ef104b9e5d4566633b8d.jpg)
![[Image: 1c229fa920cf7408823acb85872d6424.jpg]](https://uploads.tapatalk-cdn.com/20170223/1c229fa920cf7408823acb85872d6424.jpg)
![[Image: 9187775c2a049df86594a27cc70eb2a3.jpg]](https://uploads.tapatalk-cdn.com/20170223/9187775c2a049df86594a27cc70eb2a3.jpg)
Gorgeous! So tomorrow night I'll be finishing rebuilding the bottom end and fitting these. Then I'm awaiting my custom headgasket and my head back (I hate lapping valves so have got a local company to do it) and I can put the engine fully together.
Currently the engine looks like this:
![[Image: 4e89aff2b1b08fef43bf268fd556f12f.jpg]](https://uploads.tapatalk-cdn.com/20170223/4e89aff2b1b08fef43bf268fd556f12f.jpg)
Custom Performance dampened Pulley fitment can be seen at the front. It's no power steering pump! As my new power steering setup is finished:
![[Image: aa62a7cc820bdff7c28e994eea111bef.jpg]](https://uploads.tapatalk-cdn.com/20170223/aa62a7cc820bdff7c28e994eea111bef.jpg)
The engine bay has been resprayed and rebuilt:
![[Image: c5a91db53f848d813fdf6acaf1349f54.jpg]](https://uploads.tapatalk-cdn.com/20170223/c5a91db53f848d813fdf6acaf1349f54.jpg)
![[Image: 7437440908b28ecbf0ab66a116440e4c.jpg]](https://uploads.tapatalk-cdn.com/20170223/7437440908b28ecbf0ab66a116440e4c.jpg)
I've since bought a Remote oil filter kit to add to the bay, the fittings have cost me more than the kit, but it'll help with space around the block, and make changes easier
![[Image: 96a9590fcd6aa21c58d09f1ceb43e6cc.jpg]](https://uploads.tapatalk-cdn.com/20170223/96a9590fcd6aa21c58d09f1ceb43e6cc.jpg)
I've started making my new dash surround as well:
![[Image: af4ffabd4ea06dfe3ba379f6f8b72dcc.jpg]](https://uploads.tapatalk-cdn.com/20170223/af4ffabd4ea06dfe3ba379f6f8b72dcc.jpg)
Obviously a bit of work left on that, but I'll also be fibreglassing/ filling my new centre dash section as I've simplified the heater system as I don't have half the climate control sensors any more.
The new manifold needed the wastegate pipe fitting, so I've welded that on and also got a slightly larger (2mm) wastegate; not because I needed it, but because it was a newer version, so a tad small overall, and it's '6boost' branded same as my manifold.
![[Image: 4f27ed235a095dcd4f843bcb60af97a9.jpg]](https://uploads.tapatalk-cdn.com/20170224/4f27ed235a095dcd4f843bcb60af97a9.jpg)
Finally I've been spending time on the wiring tidying the wires up, finishing the full install of the ecu, and moving my fuse box so it's a bit more accessible:
![[Image: 28aa201764ce7c9b1834a511138776cf.jpg]](https://uploads.tapatalk-cdn.com/20170224/28aa201764ce7c9b1834a511138776cf.jpg)
![[Image: dae566dd6842f2bbe535982b291d0467.jpg]](https://uploads.tapatalk-cdn.com/20170224/dae566dd6842f2bbe535982b291d0467.jpg)
Will update more as the next couple of weeks go, nothing happening over the weekend though as it's the annual OJC mod/admin get together to prepare all the club equipment for another year of shows! Get tot the club shop now and get you ticket!
Sent from my iPad using Tapatalk
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
Sparkystav
13-01-2024, 03:32 PM #1,377Well where do I start.
This winter I have spent a ridiculous amount of money on new bits for the car-
New ecu
New throttle body
New turbo manifold
Lots of new fittings and connectors
Full engine rebuild so new seals, bearings, etc.
Then I decided a couple of weeks ago I wanted to finally take the plunge and get forged pistons as well.
So a fire sale ensued of my GTE spares (still one set of rods left btw) and I handed the money over to PerformanceUnlimited to pass to JE pistons.
Well today I got home from work to these!
Gorgeous! So tomorrow night I'll be finishing rebuilding the bottom end and fitting these. Then I'm awaiting my custom headgasket and my head back (I hate lapping valves so have got a local company to do it) and I can put the engine fully together.
Currently the engine looks like this:
Custom Performance dampened Pulley fitment can be seen at the front. It's no power steering pump! As my new power steering setup is finished:
The engine bay has been resprayed and rebuilt:
I've since bought a Remote oil filter kit to add to the bay, the fittings have cost me more than the kit, but it'll help with space around the block, and make changes easier
I've started making my new dash surround as well:
Obviously a bit of work left on that, but I'll also be fibreglassing/ filling my new centre dash section as I've simplified the heater system as I don't have half the climate control sensors any more.
The new manifold needed the wastegate pipe fitting, so I've welded that on and also got a slightly larger (2mm) wastegate; not because I needed it, but because it was a newer version, so a tad small overall, and it's '6boost' branded same as my manifold.
Finally I've been spending time on the wiring tidying the wires up, finishing the full install of the ecu, and moving my fuse box so it's a bit more accessible:
Will update more as the next couple of weeks go, nothing happening over the weekend though as it's the annual OJC mod/admin get together to prepare all the club equipment for another year of shows! Get tot the club shop now and get you ticket!
Sent from my iPad using Tapatalk
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
iscoStu:![[Image: tempsig2.jpg]](http://i121.photobucket.com/albums/o227/84stoney/tempsig2.jpg)
ad: It was a tough call to make, but the Supercharged IS200 is being retired. 
2 Guest(s)
2 Guest(s)
Views 321
Last Post by