Rabster Car And Toys

JapCarForum Car Manufacturers Lexus/Toyota IS200 / IS300 / SPORTCROSS / Altezza Modifications & Tuning Rabster Car And Toys

Pages (3): Previous 1 2 3 Next

Rabster
Posting Freak

10,234

22-05-2016, 01:20 PM

#11

So now onto fitting
Car jacked up

[Image: DSCF0121.jpg]

Cat - centre section ready to be undone thanks to Kwick Fit

[Image: DSCF0123.jpg]

All polished ready to go on

[Image: DSCF0120.jpg]

Old exhaust off

[Image: DSCF0124.jpg]

When I fitted the new one I went to helfrauds and got some loctite exhaust gasket squeegee tube thing worked great no mess squirted around the seals and bolted it back together

Now on the car awaiting alignment

[Image: DSCF0127.jpg]

It’s on the car I know it’s not fully straight yet but I will worry about that next weekend, I believe its jut the brackets that need bending

Here is the finished article from last night
[Image: IMAG0034.jpg]

Now this next pic just imagine your driving down the road at night well dusk and you see this
Speeding up in your rear view mirror what would you think..................................................
[Image: IMAG0036.jpg]

Rabster

22-05-2016, 01:20 PM #11

So now onto fitting
Car jacked up

[Image: DSCF0121.jpg]

Cat - centre section ready to be undone thanks to Kwick Fit

[Image: DSCF0123.jpg]

All polished ready to go on

[Image: DSCF0120.jpg]

Old exhaust off

[Image: DSCF0124.jpg]

When I fitted the new one I went to helfrauds and got some loctite exhaust gasket squeegee tube thing worked great no mess squirted around the seals and bolted it back together

Now on the car awaiting alignment

[Image: DSCF0127.jpg]

It’s on the car I know it’s not fully straight yet but I will worry about that next weekend, I believe its jut the brackets that need bending

Here is the finished article from last night
[Image: IMAG0034.jpg]
[Image: IMAG0035.jpg]

Now this next pic just imagine your driving down the road at night well dusk and you see this
Speeding up in your rear view mirror what would you think..................................................
[Image: IMAG0036.jpg]

Rabster
Posting Freak

10,234

22-05-2016, 01:22 PM

#12

if you know what im talking about

anyway onto fitting

As some of you know i have a double din DDX-6029 now this only has one AV input so i spen a little while making up a way to change from one input to 2 inputs which you will see at the end of the thread

Anyways here is the process

[Image: DSCF0130.jpg]

so here is the wiring going in

[Image: DSCF0132.jpg]

wiring through the bulk head

[Image: DSCF0134.jpg]

the harness that comes with it doesnt draw all its power from the OBDII like the Scangauge does you have to wire in an aditional ignition feed they do give you a fused wire for this ready for installation so that was easy enough

here is the I/F Unit and boost sensor installed

[Image: DSCF0145.jpg]

Here is the boost T-piece

[Image: DSCF0151.jpg]

Rabster

22-05-2016, 01:22 PM #12

OK so i was looking for some gauges and some one suggested the HKS Camp 2 now i thought about it long and hard, and weighed up the cost of the other brands like Defi etc
Although the Camp 2 came out more expensive on initial outlay the scope for additions is vast

so i placed the order with Mazda Rotary Parts In kent came highly recomended by a few Mazda mates
order was placed at 14.45 on the thusday evening
Order arrived at 8.20 on frioday morning now that is service i cant fault very helpfull and as it was a large order i paid no next day delivery costs very helpful and all parts came direct from HKS Definatly Brand new [Image: whistling.gif] if you know what im talking about

anyway onto fitting

As some of you know i have a double din DDX-6029 now this only has one AV input so i spen a little while making up a way to change from one input to 2 inputs which you will see at the end of the thread

Anyways here is the process

[Image: DSCF0130.jpg]

[Image: DSCF0131.jpg]

so here is the wiring going in

[Image: DSCF0132.jpg]

[Image: DSCF0133.jpg]

wiring through the bulk head

[Image: DSCF0134.jpg]

the harness that comes with it doesnt draw all its power from the OBDII like the Scangauge does you have to wire in an aditional ignition feed they do give you a fused wire for this ready for installation so that was easy enough

here is the I/F Unit and boost sensor installed

[Image: DSCF0145.jpg]
Here is the boost T-piece

[Image: DSCF0151.jpg]

[Image: DSCF0152.jpg]

Rabster
Posting Freak

10,234

22-05-2016, 01:24 PM

#13

OK so now on to the setting up the system

Here is it upon 1st power up

[Image: DSCF0139.jpg]

Now the strange thing is we have LEXUS cars but to make the HKS camp 2 work with the IS200 OBDII we have to tell the HKS that its a BMW1 sytem dont ask me why a guy from the MY.IS forum helped me out here

[Image: DSCF0135.jpg]

So once that was done we have this

[Image: DSCF0142.jpg]

Analogue Gauges

[Image: DSCF0141.jpg]

Digital Gauges

[Image: DSCF0143.jpg]

3 selection gauges for digital

[Image: DSCF0138.jpg]

Here is the finished article with alternating screens between front camera and HKS Camp2

Rabster

22-05-2016, 01:24 PM #13

OK so now on to the setting up the system

Here is it upon 1st power up

[Image: DSCF0139.jpg]

Now the strange thing is we have LEXUS cars but to make the HKS camp 2 work with the IS200 OBDII we have to tell the HKS that its a BMW1 sytem dont ask me why a guy from the MY.IS forum helped me out here

[Image: DSCF0135.jpg]

So once that was done we have this

[Image: DSCF0142.jpg]

Analogue Gauges

[Image: DSCF0141.jpg]

Digital Gauges

[Image: DSCF0143.jpg]

3 selection gauges for digital

[Image: DSCF0138.jpg]

Here is the finished article with alternating screens between front camera and HKS Camp2

Lexusboy
Posting Freak

9,267

22-05-2016, 01:29 PM

#14

Looks great mate i would be scared if that was behind me on a country lane the lights look like there going to eat me:lol:

Lexusboy

22-05-2016, 01:29 PM #14

Looks great mate i would be scared if that was behind me on a country lane the lights look like there going to eat me:lol:

Rabster
Posting Freak

10,234

22-05-2016, 01:33 PM

#15

1st mod was a new radio with a custom harness to existing wiring (the now standard bypass lead didnt exist in late 2006)

[Image: 100_0285.jpg]

2nd Mod was a Kenwood IPOD adapter

3rd Mod Parrot CK3200 into external speaker

[Image: 100_0286.jpg]

4th Mod was LED footwell lights

5th Mod was Boot install MK1 (stupid design took 20min to get to spare wheel)

6th Mod boot install MK2 (much more user friendly but still not good enough)

[Image: 15042008157.jpg]

7th Mod 1touch wiring all round car

[Image: 05042008144.jpg]

the green and red wire in each door is the window UP and down Switch

8th Mod Window Clousure

9th Mod Venting system and Full window roll down from remote Not on Lexus but seperate remote for now i am looking into this

10th Mod Wing mirror Closing circuit

11th Mod Scangauge Unit verry cool not happy with where i have mounted it so it will be moving up the top where the factory sat nav screen normally is

[Image: 14072008352.jpg]

This is the circuit that geoffers Designed it is really easy to build

12th Mod Painted calipers

[Image: 07072008287.jpg]

They did look awfull before

[Image: 07072008289.jpg]

Now they look really good

13th mod Reversing camera

[Image: 14072008342.jpg]

Sorry no during pics as i forgot sorry

14th mod HID 6k headlights

will get the Headlight pics up later on

Future mods i did start fitting a Parking sensor kit to the front of my car it did work well when was on the drive with the big front end up in the air

but back on the road there 2 low down and sensors dont work propperly so need to re think

here is how far i got

[Image: 14072008347.jpg]

Rabster

22-05-2016, 01:33 PM #15

1st mod was a new radio with a custom harness to existing wiring (the now standard bypass lead didnt exist in late 2006)

[Image: 100_0285.jpg]

2nd Mod was a Kenwood IPOD adapter

3rd Mod Parrot CK3200 into external speaker

[Image: 100_0286.jpg]

4th Mod was LED footwell lights

5th Mod was Boot install MK1 (stupid design took 20min to get to spare wheel)

6th Mod boot install MK2 (much more user friendly but still not good enough)

[Image: 15042008157.jpg]
[Image: 15042008158.jpg]

7th Mod 1touch wiring all round car

[Image: 05042008144.jpg]

[Image: 09042008155.jpg]

the green and red wire in each door is the window UP and down Switch

8th Mod Window Clousure

9th Mod Venting system and Full window roll down from remote Not on Lexus but seperate remote for now i am looking into this

10th Mod Wing mirror Closing circuit

11th Mod Scangauge Unit verry cool not happy with where i have mounted it so it will be moving up the top where the factory sat nav screen normally is

[Image: 14072008352.jpg]
This is the circuit that geoffers Designed it is really easy to build

12th Mod Painted calipers

[Image: 07072008287.jpg]

[Image: 07072008286.jpg]
They did look awfull before

[Image: 07072008289.jpg]

[Image: 07072008290.jpg]
Now they look really good

13th mod Reversing camera

[Image: 14072008342.jpg]

[Image: 14072008345.jpg]

[Image: 14072008344.jpg]

Sorry no during pics as i forgot sorry

14th mod HID 6k headlights

will get the Headlight pics up later on

Future mods i did start fitting a Parking sensor kit to the front of my car it did work well when was on the drive with the big front end up in the air

but back on the road there 2 low down and sensors dont work propperly so need to re think

here is how far i got

[Image: 14072008347.jpg]

alamkhan3980
Senior Member

368

22-05-2016, 05:14 PM

#16

I have some greats mods on your car Rabster.

I will be picking brains on the camera setup, as I really need it.

alamkhan3980

22-05-2016, 05:14 PM #16

I have some greats mods on your car Rabster.

I will be picking brains on the camera setup, as I really need it.

parthiban
Posting Freak

4,925

23-05-2016, 12:11 AM

#17

Fantastic stuff mate, you've got some awesome gadgets on this car now!

Yep with the parking sensors, if you put them that low on the bumper they need to be angled upwards slightly. Otherwise they need to be around the middle of the bumper (sort of in line with the top of the license plate).

2002 '02' IS200 SE Auto - DVD Satnav with Voice Activation - [COLOR="Blue"]Strathcaron Blue - Parking Sensors - 5000K HIDs with Anti-Glare Bulbs - PIAA 6500K Main Beams - LED Sidelights - Mirror/Sunroof Closure - TTE Styling Kit - 18" Styling Kit Alloys with nitrogen filled Goodyear Eagle F1 Asymmetric Tyres - Bluetouch Multimedia Kit - Gromaudio AUX in - Black painted calipers with silver Lexus decals - 12 LED Dome Light - 96 LED Boot Light - Stainless Steel Sport Sill Plates - PIAA Silicone Wipers[/COLOR]

parthiban

23-05-2016, 12:11 AM #17

steviewevie
Posting Freak

7,993

23-05-2016, 12:35 AM

#18

Awesome stuff. Loving the "angry face" lights :biggrin:

What's the "venting system" though ? (9th mod)

I must must must get my calipers painted !

IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

steviewevie

23-05-2016, 12:35 AM #18

Awesome stuff. Loving the "angry face" lights :biggrin:

What's the "venting system" though ? (9th mod)

I must must must get my calipers painted !

IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Rabster
Posting Freak

10,234

23-05-2016, 01:15 AM

#19

the venting system is a little box that opens the windows whilst the car is locked i had this on a remote but wasnt to reliable

so i did start research into having a thermostat ciruit with a timer so when it got to a certian temperature the windows would open for say 20min to allow it to cool down inside then close again

i did knock a circuit up nd tested on the bench but never got round to fitting it and now lost it lol

Rabster

23-05-2016, 01:15 AM #19

steviewevie
Posting Freak

7,993

23-05-2016, 01:22 AM

#20

Rabster the venting system is a little box that opens the windows whilst the car is locked i had this on a remote but wasnt to reliable

so i did start research into having a thermostat ciruit with a timer so when it got to a certian temperature the windows would open for say 20min to allow it to cool down inside then close again

i did knock a circuit up nd tested on the bench but never got round to fitting it and now lost it lol

Wow, sounds impressive ! :thumbup1:

IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

steviewevie

23-05-2016, 01:22 AM #20

Rabster the venting system is a little box that opens the windows whilst the car is locked i had this on a remote but wasnt to reliable

so i did start research into having a thermostat ciruit with a timer so when it got to a certian temperature the windows would open for say 20min to allow it to cool down inside then close again

i did knock a circuit up nd tested on the bench but never got round to fitting it and now lost it lol

Wow, sounds impressive ! :thumbup1:

IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Pages (3): Previous 1 2 3 Next

Recently Browsing
5 Guest(s)

Related Threads…

Few new toys on the IS.
by Sparkystav

Replies 33
Views 1,626

18-02-2017, 04:48 AM
Last Post by Chri5