JapCarForum General Discussions New Members newbi from croydon on board

newbi from croydon on board

newbi from croydon on board

Pages (6): Previous 1 2 3 4 5 6 Next
Bandit
Posting Freak
6,464
12-12-2016, 03:34 PM
#11
Both altezza engines have Beams on the top mate, one says beams 2000 on the airbox, and the 4 cylinder has it on the top of the rocker cover?

Here you go mate,

4 Cylinder Beams,(this one has a turbo fitted)
[Image: beamsrs200.jpg]

6 Cylinder Beams2000
[Image: beams2000.jpg]

Big Grin
Edited 24-01-2010, 11:11 AM by Bandit.

Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!
Bandit
12-12-2016, 03:34 PM #11

Both altezza engines have Beams on the top mate, one says beams 2000 on the airbox, and the 4 cylinder has it on the top of the rocker cover?

Here you go mate,

4 Cylinder Beams,(this one has a turbo fitted)
[Image: beamsrs200.jpg]

6 Cylinder Beams2000
[Image: beams2000.jpg]

Big Grin


Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!

Asi
Posting Freak
2,510
12-12-2016, 04:02 PM
#12
welcome mate

[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]
Asi
12-12-2016, 04:02 PM #12

welcome mate


[SIZE="5"]V8 TURBO IS200
JAE Best Modified OJC Winner [/SIZE]

steviewevie
Posting Freak
7,993
12-12-2016, 11:55 PM
#13
Yeah keep an eye out for people selling Altezzas with the wrong description, as Bandit says !

The "Beams" thing is confusing. What people normally mean by the Beams motor is the 4-cylinder 3S-GE engine, that's the Celica/MR2 engine that you mention, yes. The problem is that there's also the AS200 model that Bandit mention, with the same engine as the IS200, and on this model it says "Beams" on the engine cover, and that confuses a lot of people !

If you can see a pic of the engine bay then you can tell for sure, the 4-cylinder and 6-cylinder bays look very different (e.g. intake manifold is on the driver's side on the 4-cyl but on the passenger side on the 6-cyl).

Doh ! Missed the second page with Chris's pic ! :laugh:

[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
12-12-2016, 11:55 PM #13

Yeah keep an eye out for people selling Altezzas with the wrong description, as Bandit says !

The "Beams" thing is confusing. What people normally mean by the Beams motor is the 4-cylinder 3S-GE engine, that's the Celica/MR2 engine that you mention, yes. The problem is that there's also the AS200 model that Bandit mention, with the same engine as the IS200, and on this model it says "Beams" on the engine cover, and that confuses a lot of people !

If you can see a pic of the engine bay then you can tell for sure, the 4-cylinder and 6-cylinder bays look very different (e.g. intake manifold is on the driver's side on the 4-cyl but on the passenger side on the 6-cyl).

Doh ! Missed the second page with Chris's pic ! :laugh:


[Image: Sig-enginebay.jpg]
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !

Chri5
Posting Freak
1,894
13-12-2016, 12:55 AM
#14
I know there's vast jap knowledge mate but when I asked others
for advice I was pointed onto here as there's a lot of knowledge especially about
the lexus Smile

As soon as I get my motor i'll get pix up Wink
Chri5
13-12-2016, 12:55 AM #14

I know there's vast jap knowledge mate but when I asked others
for advice I was pointed onto here as there's a lot of knowledge especially about
the lexus Smile

As soon as I get my motor i'll get pix up Wink

TM
Banned
1,687
13-12-2016, 01:40 AM
#15
:Bazza:welcome mate:Bazza:
TM
13-12-2016, 01:40 AM #15

:Bazza:welcome mate:Bazza:

icemahn
Member
137
13-12-2016, 02:27 AM
#16
Welcome mate. Have you tried Pistonheads? Not sure what budget you are into but I found a few in there. Here's one example, don't know if you fancy yellow?Smile

http://www.pistonheads.com/sales/1445261.htm

Mazda CX7. 2.3 Turbo MPS. Corksport air intake. Turbo Smart dual port.
icemahn
13-12-2016, 02:27 AM #16

Welcome mate. Have you tried Pistonheads? Not sure what budget you are into but I found a few in there. Here's one example, don't know if you fancy yellow?Smile

http://www.pistonheads.com/sales/1445261.htm


Mazda CX7. 2.3 Turbo MPS. Corksport air intake. Turbo Smart dual port.

spikes
Posting Freak
1,153
13-12-2016, 04:46 AM
#17
hi Chri5,welcome:biggrin::biggrin:

spikes
spikes
13-12-2016, 04:46 AM #17

hi Chri5,welcome:biggrin::biggrin:


spikes

Chri5
Posting Freak
1,894
13-12-2016, 05:10 AM
#18
thanx everyone for the welcome
and a big thanx bandit for the heads up about the 6cylinder beams.

1 of the cars i was looking at clearly states 6cylinder but he is trying to make out that its 210bhp.
had i not enquired on here i wouldnt of known any different until later.
Chri5
13-12-2016, 05:10 AM #18

thanx everyone for the welcome
and a big thanx bandit for the heads up about the 6cylinder beams.

1 of the cars i was looking at clearly states 6cylinder but he is trying to make out that its 210bhp.
had i not enquired on here i wouldnt of known any different until later.

spikes
Posting Freak
1,153
13-12-2016, 05:13 AM
#19
Chri5 thanx everyone for the welcome
and a big thanx bandit for the heads up about the 6cylinder beams.

1 of the cars i was looking at clearly states 6cylinder but he is trying to make out that its 210bhp.
had i not enquired on here i wouldnt of known any different until later.

seen a few like this, just keep a look out for this,good luck in your search:biggrin:

spikes
spikes
13-12-2016, 05:13 AM #19

Chri5 thanx everyone for the welcome
and a big thanx bandit for the heads up about the 6cylinder beams.

1 of the cars i was looking at clearly states 6cylinder but he is trying to make out that its 210bhp.
had i not enquired on here i wouldnt of known any different until later.

seen a few like this, just keep a look out for this,good luck in your search:biggrin:


spikes

Chri5
Posting Freak
1,894
13-12-2016, 05:33 AM
#20
i actually have just found 1 m8 Smile
just agreed a price and everything seems good apart from the satnav screen dont work cos of the sterio.
but i am guessing that as its jap import then the sat nav would be in japanese anyway???
Chri5
13-12-2016, 05:33 AM #20

i actually have just found 1 m8 Smile
just agreed a price and everything seems good apart from the satnav screen dont work cos of the sterio.
but i am guessing that as its jap import then the sat nav would be in japanese anyway???

Pages (6): Previous 1 2 3 4 5 6 Next
Recently Browsing
 2 Guest(s)
Recently Browsing
 2 Guest(s)
Related Threads…
Replies 10
Views 289
18-08-2023, 11:33 AM
Last Post by RCarter