Cleaning Seat belts
Cleaning Seat belts
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
20-12-2016, 03:11 AM #2Use a *very* mild detergent and don't scrub hard. It's very important, for obvious reasons, not to weaken the fabric.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
jay_russell
20-12-2016, 03:28 AM #3you can take them out and soak them in vanish ..... let them dry and then fit them back.... did this one one of the little ones puked yogurt all over it while i was doing 240 kph
jay_russell you can take them out and soak them in vanish ..... let them dry and then fit them back.... did this one one of the little ones puked yogurt all over it while i was doing 240 kph
Personally I wouldn't soak them in Vanish unless it was very very diluted.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
20-12-2016, 03:30 AM #4jay_russell you can take them out and soak them in vanish ..... let them dry and then fit them back.... did this one one of the little ones puked yogurt all over it while i was doing 240 kph
Personally I wouldn't soak them in Vanish unless it was very very diluted.
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
ICE-JVC kw-avx820,JL 300/4,JL 500/1,JL HO210R-W3V2,mb quart rua-216 components,2x veba headrest screens
TRD front lip,hid 8000k,ik 20's,front armrest,18'' black rims with chrome polished lip,k&n filter,hks superdragger,chrome a/c rings,rear view camera,bc coilovers
aaronabbott
20-12-2016, 04:24 AM #5yeah swap them to black like i did lol:thumbup:
ICE-JVC kw-avx820,JL 300/4,JL 500/1,JL HO210R-W3V2,mb quart rua-216 components,2x veba headrest screens
TRD front lip,hid 8000k,ik 20's,front armrest,18'' black rims with chrome polished lip,k&n filter,hks superdragger,chrome a/c rings,rear view camera,bc coilovers
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
I steam cleaned mine, using my steam cleaner and soft pads? mine were the black but the dirt that came out of them was amazing and they looked a lot fresher once they dried out :thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
The way i did mine mate, was to pull the belt out a bit and lock it off using a peg that you use to hang the washing out with, so they didn't retract back into the unit? work your way down them with the cleaner on the top of the belt and a soft clean cloth behind the belt to catch any excess water and any dirt that's pushed through from the front and leave to dry out, when dry remove the peg and let them go back in :thumbup1:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
5 Guest(s)
5 Guest(s)
Views 959
Last Post by
Views 652
Last Post by
Views 1,045
Last Post by
Views 434
Last Post by