JapCarForum Cars, Cars, Cars! Project Cars Little write up on the evolution of my car

Little write up on the evolution of my car

Little write up on the evolution of my car

Pages (139): Previous 119 20 21 22 23139 Next  
dimis
Posting Freak
3,795
21-12-2016, 12:53 PM
Sparkystav I think the red thin ones to the side are TOMS ones,cause i dont think the cusco ones have the "X" piece

You maybe right mate. from the colour it seems to be Tom's braces

LEXUS IS200 - The most fun car to go sideways
dimis
21-12-2016, 12:53 PM #201

Sparkystav I think the red thin ones to the side are TOMS ones,cause i dont think the cusco ones have the "X" piece

You maybe right mate. from the colour it seems to be Tom's braces


LEXUS IS200 - The most fun car to go sideways

Sparkystav
Administrator
14,683
21-12-2016, 12:54 PM
ormi nooooooooooo :crying: cant the metal wizzard moley take mesurements??then you wont have to cut them up??then i can buy it off you??:thumbup1::lol:

Well if im only cutting the top bars off. angling the corners and fitting them back again.

Ive got some measurements taken already for moley. just need to put them in a proper drawing.

OutlawJapClub Admin Team
Sparkystav
21-12-2016, 12:54 PM #202

ormi nooooooooooo :crying: cant the metal wizzard moley take mesurements??then you wont have to cut them up??then i can buy it off you??:thumbup1::lol:

Well if im only cutting the top bars off. angling the corners and fitting them back again.

Ive got some measurements taken already for moley. just need to put them in a proper drawing.


OutlawJapClub Admin Team

ormi
Posting Freak
3,006
21-12-2016, 12:58 PM
aa so your just modding yours slightly....

[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
ormi
21-12-2016, 12:58 PM #203

aa so your just modding yours slightly....


[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more

Sparkystav
Administrator
14,683
21-12-2016, 01:03 PM
thats the idea mate

OutlawJapClub Admin Team
Sparkystav
21-12-2016, 01:03 PM #204

thats the idea mate


OutlawJapClub Admin Team

ormi
Posting Freak
3,006
21-12-2016, 01:07 PM
i see i see oh well off to look for under bracing now!!:blink::lol:

[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more
ormi
21-12-2016, 01:07 PM #205

i see i see oh well off to look for under bracing now!!:blink::lol:


[Image: ormiedit1-2.jpg]
TTE supercharger,pr0lex manifold,hks fcd,larger intercooler,apexi induction kit,silicone hose kit,IK22's,polished engine parts,TTE front bumper mod'd for intercooler,TRD side skirts,TRD rear lip,JDM headlights and fogs,10k hid headlights 8k full beam,L8XSS p/plate,fog/brake/light conversion,18"fox rs's,lowered 90mm(f)100mm®,moleys under bars,yellow trd anti rollbars,full stainless exhaust,carbon fiber intake plus so much more

rig-pig
Junior Member
46
23-12-2016, 10:58 PM
hi stav i enjoyed seeing your car in the mag after being away from the LOC site for a while

[Image: Photo003-1-1.jpg]
Craig

time served car mechanic
now a rig monkey
rig-pig
23-12-2016, 10:58 PM #206

hi stav i enjoyed seeing your car in the mag after being away from the LOC site for a while


[Image: Photo003-1-1.jpg]
Craig

time served car mechanic
now a rig monkey

micromarc
Member
203
05-01-2017, 01:27 PM
Surprised your having so many problems with them mate, anyone that's seen my car will know how low it is and mine scrape sometimes but haven't caused me any other problems.
micromarc
05-01-2017, 01:27 PM #207

Surprised your having so many problems with them mate, anyone that's seen my car will know how low it is and mine scrape sometimes but haven't caused me any other problems.

Sparkystav
Administrator
14,683
05-01-2017, 01:30 PM
i think its just that im not used to them and need to slow down on some things a bit?

OutlawJapClub Admin Team
Sparkystav
05-01-2017, 01:30 PM #208

i think its just that im not used to them and need to slow down on some things a bit?


OutlawJapClub Admin Team

Bandit
Posting Freak
6,464
05-01-2017, 02:00 PM
How's the mod list going mate? has it gone down on things to do or is it still getting bigger :biggrin:

Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!
Bandit
05-01-2017, 02:00 PM #209

How's the mod list going mate? has it gone down on things to do or is it still getting bigger :biggrin:


Lexus IS200 Sport Navigator (Now being stripped again) :blink:


Now Don't Forget The REP!!!

Sparkystav
Administrator
14,683
05-01-2017, 02:01 PM
Started my gauge pod adjustment as well the past couple of days:

this is what it was:

[Image: DSC_0262.jpg]


But i have at least a couple of new gauges now so need some more space.

Started with this pod:
[Image: 08_tripledashdome_ebay.jpg]

trimmed the edges off it and gave the bottom a slight curve.
Then taped it to the old holder and siliconed the inside edges to hold it in place.
Once that dried i filled around the edges roughly and now its down to sanding it back and then refilling till its nice and smooth.

Filled VERY roughly:

[Image: DSC00543.jpg]
[Image: DSC00544.jpg]

The filler im using:
[Image: DSC00545.jpg]

and the paper (plus some grades in between):
[Image: DSC00546.jpg]

I'm now at the stage of spraying it with hi build primer to get a nice base for the final black
Edited 16-02-2010, 11:38 PM by Sparkystav.

OutlawJapClub Admin Team
Sparkystav
05-01-2017, 02:01 PM #210

Started my gauge pod adjustment as well the past couple of days:

this is what it was:

[Image: DSC_0262.jpg]


But i have at least a couple of new gauges now so need some more space.

Started with this pod:
[Image: 08_tripledashdome_ebay.jpg]

trimmed the edges off it and gave the bottom a slight curve.
Then taped it to the old holder and siliconed the inside edges to hold it in place.
Once that dried i filled around the edges roughly and now its down to sanding it back and then refilling till its nice and smooth.

Filled VERY roughly:

[Image: DSC00543.jpg]
[Image: DSC00544.jpg]

The filler im using:
[Image: DSC00545.jpg]

and the paper (plus some grades in between):
[Image: DSC00546.jpg]

I'm now at the stage of spraying it with hi build primer to get a nice base for the final black


OutlawJapClub Admin Team

Pages (139): Previous 119 20 21 22 23139 Next  
Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 2
Views 283
22-02-2024, 02:07 PM
Last Post by Sparkystav