Modifying The Autoleads Facia For Is200 & Is300, Walkthru with Pics by DJ Wozza..
Modifying The Autoleads Facia For Is200 & Is300, Walkthru with Pics by DJ Wozza..
10-01-2017, 11:20 AM
jay_russell
10-01-2017, 11:20 AM #11or do like me and fit heated seats in the back and put a 3rd switch for the rear in the middle and then move the trc/snow button next to the light washer button
10-01-2017, 12:27 PM
Marsdendean Or move your snow button next to the handbrake like mine
jay_russell or do like me and fit heated seats in the back and put a 3rd switch for the rear in the middle and then move the trc/snow button next to the light washer button
2tongues You have the devils transmission though:Shooting:
Or just create a fully custom one in the tiny pocket under the arm rest like me
![[Image: LexuS-Copy.jpg]](http://i65.photobucket.com/albums/h204/Sparkystav/LexuS-Copy.jpg)
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
Sparkystav
10-01-2017, 12:27 PM #13Marsdendean Or move your snow button next to the handbrake like mine
jay_russell or do like me and fit heated seats in the back and put a 3rd switch for the rear in the middle and then move the trc/snow button next to the light washer button
2tongues You have the devils transmission though:Shooting:
Or just create a fully custom one in the tiny pocket under the arm rest like me
Read my thread here: The Evolution of my Turbo Lexus from NA-Supercharged-Twin Turbo-Massive Single
Please leave your comments.
OutlawJapClub Admin Team
13-01-2017, 10:17 AM
DJ Wozza I did think I had posted it funnily enough, but thought to myself if Bandit is posting it up I must be mistaken :laugh:
Someone asked for it mate, so thought i'd post it again :laugh: at least if they search now they will get 2 decent results :laugh::laugh:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
DJ Wozza I did think I had posted it funnily enough, but thought to myself if Bandit is posting it up I must be mistaken :laugh:
Someone asked for it mate, so thought i'd post it again :laugh: at least if they search now they will get 2 decent results :laugh::laugh:
Lexus IS200 Sport Navigator (Now being stripped again) :blink:
Now Don't Forget The REP!!!
19-01-2017, 12:08 AM
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
Right so i started this yesterday and as woz says it certainly does take time, Ive glued the pocket bracket in, filled it and sanded it down.....by then it was past 11pm and thought that will do for tonight!!.....there are still a few minor imperfections, would it be worth putting some primer on at this stage and then sanding again, or get it perfect before applying the primer and sanding.......
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
19-01-2017, 12:10 AM
![[Image: Sig-enginebay.jpg]](http://i5.photobucket.com/albums/y179/SteveHammatt/Sig-enginebay.jpg)
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
steviewevie
19-01-2017, 12:10 AM #18Yes, it can be worth spraying it then taking a look, because the primer will let you better see how the surface is looking. Keep going till you're 100% happy with it, you don't want to end up installing it and then spottng some imperfections you wish you'd sanded more !
IS200 Turbo project now just about complete ! See my thread here and leave your comments.
Now running standalone Syvecs ECU and no stock ECU !
19-01-2017, 12:20 AM
steviewevie Yes, it can be worth spraying it then taking a look, because the primer will let you better see how the surface is looking. Keep going till you're 100% happy with it, you don't want to end up installing it and then spottng some imperfections you wish you'd sanded more !
For sure mate, it just takes a while though hey:cursing:LOL!! Theres a few bits thats im going to sand down further tonight, followed by a good wash as i want to get the primer on tonight.....need it ready for the weekend.....is it worth putting more than 1 coat of primer, or should i not bother and add more coats of the top coat?
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
steviewevie Yes, it can be worth spraying it then taking a look, because the primer will let you better see how the surface is looking. Keep going till you're 100% happy with it, you don't want to end up installing it and then spottng some imperfections you wish you'd sanded more !
For sure mate, it just takes a while though hey:cursing:LOL!! Theres a few bits thats im going to sand down further tonight, followed by a good wash as i want to get the primer on tonight.....need it ready for the weekend.....is it worth putting more than 1 coat of primer, or should i not bother and add more coats of the top coat?
Tinted Glass-Sports Grill-Debadged-TTE Spoiler-TTE Lowering Springs-PLUK Kazama Exhaust-18" Aero Alloys-K&N Air Filter-Denso Iridium Power Spark Plugs-Quad Tail Light Conversion-6000K HID-X-White High Beam-6 LED Sidelights-Quad LED Boot Light-JDM OEM Smoked Front Fogs-JDM Blue Reverse Bulbs-LS430 Smoked Side Repeaters-6 LED Side Repeaters-Chrome Indicator Bulbs-Alpine HU-Rear Headrest Monitors-PIAA Super Sporza-Fan Washer Jets-Lex Tax Disc Holder-Chrome Gear Knob-2003 Cup Holder-Toyo Proxes T1-R
19-01-2017, 01:10 AM
DJ Wozza Some more info to add (that I had posted elsewhere)
If you are fitting the Head Unit directly to the unit rather than using a cage, the inner trim piece above can be glued and sanded/shaped and you end up with this
Close up the line can be seen, this is only because enough time wasn't taken to ensure it was perfectly joined and flattened off. This is quite time consuming,
but it can be achieved so it looks like one complete housing piece rather than two seperate pieces joined. The extra time is well worth it :thumbup:
Just remember this modification takes a lot of time and patience, if you don't have both, it won't result in you being happy with the result.
Good Luck !!
![[Image: RedsFacia1.jpg]](http://i786.photobucket.com/albums/yy143/djwozza2/Facia%20Walkthru/RedsFacia1.jpg)
![[Image: RedsFacia2.jpg]](http://i786.photobucket.com/albums/yy143/djwozza2/Facia%20Walkthru/RedsFacia2.jpg)
Beyonce fan? :lol:
DJ Wozza Some more info to add (that I had posted elsewhere)
If you are fitting the Head Unit directly to the unit rather than using a cage, the inner trim piece above can be glued and sanded/shaped and you end up with this
Close up the line can be seen, this is only because enough time wasn't taken to ensure it was perfectly joined and flattened off. This is quite time consuming,
but it can be achieved so it looks like one complete housing piece rather than two seperate pieces joined. The extra time is well worth it :thumbup:
Just remember this modification takes a lot of time and patience, if you don't have both, it won't result in you being happy with the result.
Good Luck !!
Beyonce fan? :lol:
Recently Browsing
2 Guest(s)
2 Guest(s)
Recently Browsing
2 Guest(s)
2 Guest(s)
Related Threads…
Replies 2
Views 942
Views 942
06-03-2021, 12:20 AM
Last Post byMillo73
Last Post by
Replies 88
Views 19,260
Views 19,260
26-01-2020, 06:18 AM
Last Post byiceman
Last Post by
Replies 20
Views 2,278
Views 2,278
30-09-2019, 12:19 PM
Last Post bytimmurray85
Last Post by
Replies 7
Views 717
Views 717
22-09-2019, 07:37 AM
Last Post byLexuspat
Last Post by
Replies 9
Views 915
Views 915
16-07-2019, 08:27 AM
Last Post byFirebirdPhil
Last Post by
Replies 5
Views 697
Views 697
12-07-2019, 10:36 PM
Last Post byFirebirdPhil
Last Post by
Replies 6
Views 743
Views 743
03-07-2019, 01:12 PM
Last Post bylexuslloyd
Last Post by