JapCarForum General Discussions The JCF Lounge cylinder head torque settings

cylinder head torque settings

cylinder head torque settings

Chri5
Posting Freak
1,894
20-03-2017, 12:07 PM
#1
so majority of the work is now done :thumbup1:
just got a few hoses and electrics to refit then its nearly happy days.

ok so i have now got my cylinder head in place and i have been given torque settings and procedures these being

stage 1 tighten to 25Nm
stage 2 tighten to 49Nm
stage 3 turn another 90degrees

however i have heard other stories from others now so i am a little confused
i have been told that once torqyed to stage 2 i then UNDO all bolts in reverse order and then redo as in stage 1 and 2 and then comes the 90degree turn.

unfortunately i arent a mechanic so i arent 100% sure what to do :crying:
Chri5
20-03-2017, 12:07 PM #1

so majority of the work is now done :thumbup1:
just got a few hoses and electrics to refit then its nearly happy days.

ok so i have now got my cylinder head in place and i have been given torque settings and procedures these being

stage 1 tighten to 25Nm
stage 2 tighten to 49Nm
stage 3 turn another 90degrees

however i have heard other stories from others now so i am a little confused
i have been told that once torqyed to stage 2 i then UNDO all bolts in reverse order and then redo as in stage 1 and 2 and then comes the 90degree turn.

unfortunately i arent a mechanic so i arent 100% sure what to do :crying:

Dark Samurai
Posting Freak
4,957
20-03-2017, 12:08 PM
#2
my dad says this is correct

Lexus IS300 Sportcross in Platinum Ice.
Click here for garage.

PSN ID: O3107 
Dark Samurai
20-03-2017, 12:08 PM #2

my dad says this is correct


Lexus IS300 Sportcross in Platinum Ice.
Click here for garage.

PSN ID: O3107 

Chri5
Posting Freak
1,894
20-03-2017, 12:09 PM
#3
whats correct???
the udnoing part???
Chri5
20-03-2017, 12:09 PM #3

whats correct???
the udnoing part???

Dark Samurai
Posting Freak
4,957
20-03-2017, 12:13 PM
#4
no not the undoing part didnt read it all.
just do it up stage 1 then 2 then 90 degree turn.
he said be careful coz u gotta get the cams in the right place.
are you putting the head on first?

Lexus IS300 Sportcross in Platinum Ice.
Click here for garage.

PSN ID: O3107 
Dark Samurai
20-03-2017, 12:13 PM #4

no not the undoing part didnt read it all.
just do it up stage 1 then 2 then 90 degree turn.
he said be careful coz u gotta get the cams in the right place.
are you putting the head on first?


Lexus IS300 Sportcross in Platinum Ice.
Click here for garage.

PSN ID: O3107 

Dan_Turism0
Posting Freak
2,825
20-03-2017, 12:17 PM
#5
may be worth having a chat with John (toxo) he tends to be the man that knows the 3S-GTE better than most Smile

My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.
Dan_Turism0
20-03-2017, 12:17 PM #5

may be worth having a chat with John (toxo) he tends to be the man that knows the 3S-GTE better than most Smile


My Garage
Supra Build Thread

' Nothing feels quick when your other car has a 1000bhp - JamieP
Quote:A Supra without a spoiler is like a Gypsy's dog without a Nob.

toxo
Posting Freak
4,843
22-03-2017, 01:58 AM
#6
I dunno if this will work as I'm not sure if Celicatech allow you to hotlink images...

[Image: EG-54.jpg]

[Image: EG-55.jpg]

[Image: EG-56.jpg]

[Image: EG-57.jpg]

[Image: EG-58.jpg]

[Image: EG-59.jpg]

[Image: EG-60.jpg]

[Image: EG-61.jpg]

[Image: EG-62.jpg]
toxo
22-03-2017, 01:58 AM #6

I dunno if this will work as I'm not sure if Celicatech allow you to hotlink images...

[Image: EG-54.jpg]

[Image: EG-55.jpg]

[Image: EG-56.jpg]

[Image: EG-57.jpg]

[Image: EG-58.jpg]

[Image: EG-59.jpg]

[Image: EG-60.jpg]

[Image: EG-61.jpg]

[Image: EG-62.jpg]

Phil01
Posting Freak
2,004
22-03-2017, 02:21 AM
#7
Chri5 whats correct???
the udnoing part???

Chris do not need to back off,

stage 1, then stage2 then plus 90

Dont loosen off mate and retorque, never heard of that one

1990 Eunos Roadster in Mariner DU blue
Cobalt cat back, Decat pipe, 15in Red Rota GT3 alloys, Toyo tyres, Lowered on Coil overs, Red anti roll bars, 14degree timing mod, white dash kit, illuminated side marker lights,
Halo ring headlights, OEM windblocker, Bluetooth streaming HU, Blue leather handbrake and gear lever gaitor, Centre brake/tail light mod, Blue velour door cards, Polished cam cover, Polished front strut bar, 4xheadrest speakers, JDM floor mats, Suede semi dish steering wheel,
Phil01
22-03-2017, 02:21 AM #7

Chri5 whats correct???
the udnoing part???

Chris do not need to back off,

stage 1, then stage2 then plus 90

Dont loosen off mate and retorque, never heard of that one


1990 Eunos Roadster in Mariner DU blue
Cobalt cat back, Decat pipe, 15in Red Rota GT3 alloys, Toyo tyres, Lowered on Coil overs, Red anti roll bars, 14degree timing mod, white dash kit, illuminated side marker lights,
Halo ring headlights, OEM windblocker, Bluetooth streaming HU, Blue leather handbrake and gear lever gaitor, Centre brake/tail light mod, Blue velour door cards, Polished cam cover, Polished front strut bar, 4xheadrest speakers, JDM floor mats, Suede semi dish steering wheel,

Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 13
Views 676
29-03-2019, 02:35 AM
Last Post by DaveEdin
Replies 33
Views 1,064
22-09-2017, 03:19 AM
Last Post by Carpediem
Replies 2
Views 226
23-06-2017, 08:15 AM
Last Post by Lexusboy
Replies 2
Views 217
10-04-2017, 03:27 AM
Last Post by FirebirdPhil