JapCarForum Club Sponsor Invisible Touch Detailing Porsche Speedster

Porsche Speedster

Porsche Speedster

26-07-2017, 01:27 AM
#1
Not a big write up this one, i purely wanted to share some pics of what i thought was a beautiful car and also very rare. Only 64 of these were produced!

I was contacted by the owner who uses the car for concourse events. He takes an awful lot of pride in it and keeps it immaculate. However he did not have the skills/confidence to remove swirls and light scratches. He tried to previously with a porter cable but made no difference at all and wasnt keen on stepping up with polish and pads.

I asked purely to do a stage 1 machine polish, nothing else was done to the car. He did not want to go as far as a stage 2, just wanted the swirls gone as they were letting the car down in direct sunlight. It was already washed and clayed prior to my arrival and was to be waxed by him the following day. So these pics are just after polishing. I recommended him to purchase a glaze before he waxed which he is going to do. No during correction shots as i was just cracking on on the day, but i would say at least 80% of defects were removed from the bonnet which was quite bad and higher than this for the rest of the car.

On arrival..

[Image: P1060280-1.jpg]

[Image: P1060285.jpg]

[Image: P1060286.jpg]

[Image: P1060287.jpg]

[Image: P1060288.jpg]

[Image: P1060289.jpg]

[Image: P1060290.jpg]

[Image: P1060291.jpg]

[Image: P1060292.jpg]

[Image: P1060293.jpg]

After polishing...

[Image: P1060294.jpg]

[Image: P1060295.jpg]

[Image: P1060296.jpg]

[Image: P1060297.jpg]

[Image: P1060298.jpg]

[Image: P1060300.jpg]

[Image: P1060301.jpg]

[Image: P1060302.jpg]

[Image: P1060305.jpg]

[Image: P1060307.jpg]
Invisible Touch Detailing
26-07-2017, 01:27 AM #1

Not a big write up this one, i purely wanted to share some pics of what i thought was a beautiful car and also very rare. Only 64 of these were produced!

I was contacted by the owner who uses the car for concourse events. He takes an awful lot of pride in it and keeps it immaculate. However he did not have the skills/confidence to remove swirls and light scratches. He tried to previously with a porter cable but made no difference at all and wasnt keen on stepping up with polish and pads.

I asked purely to do a stage 1 machine polish, nothing else was done to the car. He did not want to go as far as a stage 2, just wanted the swirls gone as they were letting the car down in direct sunlight. It was already washed and clayed prior to my arrival and was to be waxed by him the following day. So these pics are just after polishing. I recommended him to purchase a glaze before he waxed which he is going to do. No during correction shots as i was just cracking on on the day, but i would say at least 80% of defects were removed from the bonnet which was quite bad and higher than this for the rest of the car.

On arrival..

[Image: P1060280-1.jpg]

[Image: P1060285.jpg]

[Image: P1060286.jpg]

[Image: P1060287.jpg]

[Image: P1060288.jpg]

[Image: P1060289.jpg]

[Image: P1060290.jpg]

[Image: P1060291.jpg]

[Image: P1060292.jpg]

[Image: P1060293.jpg]

After polishing...

[Image: P1060294.jpg]

[Image: P1060295.jpg]

[Image: P1060296.jpg]

[Image: P1060297.jpg]

[Image: P1060298.jpg]

[Image: P1060300.jpg]

[Image: P1060301.jpg]

[Image: P1060302.jpg]

[Image: P1060305.jpg]

[Image: P1060307.jpg]

26-07-2017, 01:27 AM
#2
[Image: P1060308.jpg]

[Image: P1060309.jpg]

[Image: P1060310.jpg]

[Image: P1060312.jpg]

[Image: P1060314.jpg]

[Image: P1060315.jpg]

[Image: P1060316.jpg]
Invisible Touch Detailing
26-07-2017, 01:27 AM #2

[Image: P1060308.jpg]

[Image: P1060309.jpg]

[Image: P1060310.jpg]

[Image: P1060312.jpg]

[Image: P1060314.jpg]

[Image: P1060315.jpg]

[Image: P1060316.jpg]

26-07-2017, 01:39 AM
#3
I thought the hood cover was really nice, gave it a fatter backend Smile

Generally i do prefer the large rubber wings on this age of 911, but this just looked different
Invisible Touch Detailing
26-07-2017, 01:39 AM #3

I thought the hood cover was really nice, gave it a fatter backend Smile

Generally i do prefer the large rubber wings on this age of 911, but this just looked different

TommyH
Senior Member
499
26-07-2017, 01:52 AM
#4
Love these shape of 911's but have to agree with Gord, much prefer the large rear spoiler.

MODS- Geomtry Done(WIM Settings) -Arm Rest -TRD Front skirt -18"Sport Alloy's(Thanks Widnes is200)- Lowered 40mm -Sports Grille(repositoned horns)- Hid's 6000k Dipped -Xenon 6500k Main- LED Tower Sidelights -LED boot light -36 LED Dome Light- Polished Stainless Gearknob- Chrome Tail Pipe -Stainless A/C Rings & Clock Panel - JDM dash tray -Clear Door Lenses with Blue LED's- 6" Altezza Aerial- TOM's Ram II Air Filter- Fog/Brake Conversion -Fan Washer Jets- Stainless Dials.
TommyH
26-07-2017, 01:52 AM #4

Love these shape of 911's but have to agree with Gord, much prefer the large rear spoiler.


MODS- Geomtry Done(WIM Settings) -Arm Rest -TRD Front skirt -18"Sport Alloy's(Thanks Widnes is200)- Lowered 40mm -Sports Grille(repositoned horns)- Hid's 6000k Dipped -Xenon 6500k Main- LED Tower Sidelights -LED boot light -36 LED Dome Light- Polished Stainless Gearknob- Chrome Tail Pipe -Stainless A/C Rings & Clock Panel - JDM dash tray -Clear Door Lenses with Blue LED's- 6" Altezza Aerial- TOM's Ram II Air Filter- Fog/Brake Conversion -Fan Washer Jets- Stainless Dials.

Lexusboy
Posting Freak
9,267
26-07-2017, 02:52 AM
#5
Very nice example Christian.

Has these photo's been taken from your new house?

I like this roaster 911 because of the hood cover not sure it would look that great with the large rear spoiler on this model.
But i do like the large spoiler that comes with the likes of the Martini Porsche 911
I also like the flat nose version.
Lexusboy
26-07-2017, 02:52 AM #5

Very nice example Christian.

Has these photo's been taken from your new house?

I like this roaster 911 because of the hood cover not sure it would look that great with the large rear spoiler on this model.
But i do like the large spoiler that comes with the likes of the Martini Porsche 911
I also like the flat nose version.

26-07-2017, 03:49 AM
#6
Hi mate, thanks, no this was the customer's place
Invisible Touch Detailing
26-07-2017, 03:49 AM #6

Hi mate, thanks, no this was the customer's place

Tango
Senior Member
314
26-07-2017, 06:09 AM
#7
Good job Christian and a nice looking car too. I also like the fatter back end rather than that picnic table of a spoiler. Would love to have that in my garage.

IS 200 Sport with a few mods, Standardish IS-F. The IS250 SE-L with a few mods has gone to a new home.[SIGPIC][/SIGPIC]
Tango
26-07-2017, 06:09 AM #7

Good job Christian and a nice looking car too. I also like the fatter back end rather than that picnic table of a spoiler. Would love to have that in my garage.


IS 200 Sport with a few mods, Standardish IS-F. The IS250 SE-L with a few mods has gone to a new home.[SIGPIC][/SIGPIC]

Mikey
Senior Member
714
27-07-2017, 04:43 AM
#8
nice job Christian. First one i saw like, that do like his garage floor though lol
Mikey
27-07-2017, 04:43 AM #8

nice job Christian. First one i saw like, that do like his garage floor though lol

Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 7
Views 322
03-12-2019, 09:00 AM
Last Post by Barry
Replies 14
Views 869
31-03-2018, 07:24 AM
Last Post by FirebirdPhil
Replies 15
Views 894
18-03-2018, 02:50 AM
Last Post by toxo
Replies 7
Views 517
25-02-2017, 05:52 AM
Last Post by TM