JapCarForum Trade Area Trade Archive Selling Archive FS: TurboXS RFL Blow-Off Valve

FS: TurboXS RFL Blow-Off Valve

FS: TurboXS RFL Blow-Off Valve

jimxms
Posting Freak
2,473
31-07-2018, 10:59 PM
#1
Anyone following my build thread will know that I recently switched to a bypass valve because the TurboXS didn't like my new boost levels and would have required a new spring from the USA.

[Image: s_img_5515_1_.jpg]

^ hopefully yuo can see the image above?

The spring installed is good up to ~10PSI and when I removed it from my car I cleaned it all up, gently rubbed down the piston to remove the scoring, re-oiled it and tested it again.

I should warn you that this BOV is for those who want to be noticed as RFL = Really F*king Loud.

£50
jimxms
31-07-2018, 10:59 PM #1

Anyone following my build thread will know that I recently switched to a bypass valve because the TurboXS didn't like my new boost levels and would have required a new spring from the USA.

[Image: s_img_5515_1_.jpg]

^ hopefully yuo can see the image above?

The spring installed is good up to ~10PSI and when I removed it from my car I cleaned it all up, gently rubbed down the piston to remove the scoring, re-oiled it and tested it again.

I should warn you that this BOV is for those who want to be noticed as RFL = Really F*king Loud.

£50

jimxms
Posting Freak
2,473
06-08-2018, 10:58 AM
#2
Just wanna get rid....so £35.

Otherwise I'll be sticking it down my pants to impress the ladies.
jimxms
06-08-2018, 10:58 AM #2

Just wanna get rid....so £35.

Otherwise I'll be sticking it down my pants to impress the ladies.

DaveEdin
Posting Freak
5,657
06-08-2018, 11:04 AM
#3
Make sure it's the front, or the ladies will NOT be impressed, Jim :laugh:

IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!

Modifications
Completed:

Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )

In Progress:

E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
DaveEdin
06-08-2018, 11:04 AM #3

Make sure it's the front, or the ladies will NOT be impressed, Jim :laugh:


IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!

Modifications
Completed:

Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )

In Progress:

E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake

jimxms
Posting Freak
2,473
06-08-2018, 12:55 PM
#4
DaveEdin Make sure it's the front, or the ladies will NOT be impressed, Jim :laugh:

We'd have to call it the Follow-Thru Valve instead then :p
Edited 17-09-2011, 10:30 PM by jimxms.
jimxms
06-08-2018, 12:55 PM #4

DaveEdin Make sure it's the front, or the ladies will NOT be impressed, Jim :laugh:

We'd have to call it the Follow-Thru Valve instead then :p

Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 1
Views 163
01-12-2019, 11:19 AM
Last Post by sprinter2012
Replies 12
Views 836
06-05-2019, 07:50 PM
Last Post by rob
Replies 8
Views 363
06-12-2018, 11:51 AM
Last Post by FirebirdPhil
Replies 0
Views 206
05-01-2018, 12:37 PM
Last Post by jimxms