JapCarForum Cars, Cars, Cars! Project Cars 2005 saloon arched Impreza wagon project

2005 saloon arched Impreza wagon project

2005 saloon arched Impreza wagon project

P3sk3tt
Junior Member
5
18-05-2023, 01:00 PM
#1
After meeting a couple of members at Japfest Rock i joined the forum and thought I'd do a build diary for my wagon, although it's fairly complete now I still have plenty of future plans.

Started out when I had a front end accident in the wagon. As it was the daily and the insurance wanted to write it off I decided not to claim and carry out the repairs myself.

[Image: E6DD02ED-3AF5-4DDB-AFB7-E16E094BEF24_zpsjsgub5ly.jpg]

Week after the accident it was back on the road for the same price as my excess. Only problem I had was sourcing a wagon front end at short notice so the saloon version was used.

[Image: 917D30A8-39CE-4985-AA50-1F6A97F8392A_zpsyo2taxgo.jpg]

Wasn't overly fond on the wide front end and standard rear, whilst looking around at flares etc for the rear I found a build with someone welding on saloon rear quarters, so made the decision to have a go =)

[Image: C811A18B-5E4F-462C-AC91-93DFABBEDD83_zpscta3hqpx.jpg]

Rear quarters,saloon rear doors and bumper were sourced. Next it was time for cutting, my Mrs had heart failure when she seen the hole.

[Image: 51DFAB7F-22BB-4C7A-BBBC-5B395523E7E7_zpsfo97loce.jpg]

[Image: D364C31D-53DB-4013-AEA6-63506974E8AB_zpsrlfnvn1j.jpg]
P3sk3tt
18-05-2023, 01:00 PM #1

After meeting a couple of members at Japfest Rock i joined the forum and thought I'd do a build diary for my wagon, although it's fairly complete now I still have plenty of future plans.

Started out when I had a front end accident in the wagon. As it was the daily and the insurance wanted to write it off I decided not to claim and carry out the repairs myself.

[Image: E6DD02ED-3AF5-4DDB-AFB7-E16E094BEF24_zpsjsgub5ly.jpg]

Week after the accident it was back on the road for the same price as my excess. Only problem I had was sourcing a wagon front end at short notice so the saloon version was used.

[Image: 917D30A8-39CE-4985-AA50-1F6A97F8392A_zpsyo2taxgo.jpg]

Wasn't overly fond on the wide front end and standard rear, whilst looking around at flares etc for the rear I found a build with someone welding on saloon rear quarters, so made the decision to have a go =)

[Image: C811A18B-5E4F-462C-AC91-93DFABBEDD83_zpscta3hqpx.jpg]

Rear quarters,saloon rear doors and bumper were sourced. Next it was time for cutting, my Mrs had heart failure when she seen the hole.

[Image: 51DFAB7F-22BB-4C7A-BBBC-5B395523E7E7_zpsfo97loce.jpg]

[Image: D364C31D-53DB-4013-AEA6-63506974E8AB_zpsrlfnvn1j.jpg]

P3sk3tt
Junior Member
5
18-05-2023, 01:07 PM
#2
Next was trimming all the unwanted metal off the doner wings and trial fitment.
The saloon rear quarters are longer than the wagon and had to get creative around the rear lights to get the lines correct.

[Image: BDBE41EF-F4B6-4070-9B8D-CC7DA4E7B954_zpstnq2ygvd.jpg]

[Image: 26C046A3-F6C6-4428-809A-8A946A635D05_zpsjonlcpkp.jpg]

Once happy I was close I fully welded and gave a light skin of filler.

[Image: DDB84110-5EEB-4BAF-83CF-BAE23991E581_zps6tnmcbf1.jpg]

[Image: 37BC25A6-E816-4A6D-AE42-23EF3F49CDB8_zpsbiv0fcaj.jpg]

[Image: 4C2CAA6F-BC15-4C2D-BC12-33CDED077B2C_zpsaszofd4w.jpg]

[Image: 354A5386-DD2F-4A57-AB6E-EFE4B7501759_zpsbtgp7vvw.jpg]
P3sk3tt
18-05-2023, 01:07 PM #2

Next was trimming all the unwanted metal off the doner wings and trial fitment.
The saloon rear quarters are longer than the wagon and had to get creative around the rear lights to get the lines correct.

[Image: BDBE41EF-F4B6-4070-9B8D-CC7DA4E7B954_zpstnq2ygvd.jpg]

[Image: 26C046A3-F6C6-4428-809A-8A946A635D05_zpsjonlcpkp.jpg]

Once happy I was close I fully welded and gave a light skin of filler.

[Image: DDB84110-5EEB-4BAF-83CF-BAE23991E581_zps6tnmcbf1.jpg]

[Image: 37BC25A6-E816-4A6D-AE42-23EF3F49CDB8_zpsbiv0fcaj.jpg]

[Image: 4C2CAA6F-BC15-4C2D-BC12-33CDED077B2C_zpsaszofd4w.jpg]

[Image: 354A5386-DD2F-4A57-AB6E-EFE4B7501759_zpsbtgp7vvw.jpg]

P3sk3tt
Junior Member
5
18-05-2023, 01:19 PM
#3
Unfortunately due to the mods a bumper wasn't available off the shelf so got creative.

[Image: F72C8A47-04DC-4E37-844B-AE62C5B12602_zpswiglrtms.jpg]

[Image: 8FF449C5-09C8-4F4A-B2E7-6F9BBAC5C284_zps1gkfcmj0.jpg]

Now I handed the car over to a mate to do the hard bit and make it look presentable again.

[Image: DBA46157-44AB-4C6A-A04F-B75FAD0A2065_zpszffq3ihg.jpg]

[Image: E3D9AD9F-08DB-4BE8-BA8A-BADE80B1980F_zpsndjyszgh.jpg]

I decide on a colour change at this point, I wanted a very subtle colour that wasn't in your face and would also be something that looked oem.

[Image: A72FD90D-286D-4F33-AAE1-5D088CA87FF6_zpsyt2ajygk.jpg]

Now all fully rebuild and on the road for now till I can take it off the road again for a Hawkeye swap.

[Image: 4C84BEBF-EDC6-4DDB-8D06-3D7D4E1B9294_zpsv8e8atdk.jpg]

[Image: 79D57E6C-A1B1-4B76-81D7-D94670A3F8DB_zpszubaqwiu.jpg]

Now I'm currently taking a short break then I'll be back onto some more mods.
P3sk3tt
18-05-2023, 01:19 PM #3

Unfortunately due to the mods a bumper wasn't available off the shelf so got creative.

[Image: F72C8A47-04DC-4E37-844B-AE62C5B12602_zpswiglrtms.jpg]

[Image: 8FF449C5-09C8-4F4A-B2E7-6F9BBAC5C284_zps1gkfcmj0.jpg]

Now I handed the car over to a mate to do the hard bit and make it look presentable again.

[Image: DBA46157-44AB-4C6A-A04F-B75FAD0A2065_zpszffq3ihg.jpg]

[Image: E3D9AD9F-08DB-4BE8-BA8A-BADE80B1980F_zpsndjyszgh.jpg]

I decide on a colour change at this point, I wanted a very subtle colour that wasn't in your face and would also be something that looked oem.

[Image: A72FD90D-286D-4F33-AAE1-5D088CA87FF6_zpsyt2ajygk.jpg]

Now all fully rebuild and on the road for now till I can take it off the road again for a Hawkeye swap.

[Image: 4C84BEBF-EDC6-4DDB-8D06-3D7D4E1B9294_zpsv8e8atdk.jpg]

[Image: 79D57E6C-A1B1-4B76-81D7-D94670A3F8DB_zpszubaqwiu.jpg]

Now I'm currently taking a short break then I'll be back onto some more mods.

Sparkystav
Administrator
14,683
18-05-2023, 03:00 PM
#4
Love it!
I've seen this done before and it subtle but looks great!

OutlawJapClub Admin Team
Sparkystav
18-05-2023, 03:00 PM #4

Love it!
I've seen this done before and it subtle but looks great!


OutlawJapClub Admin Team

Jimbob-T-Lex
Moderator
1,674
21-05-2023, 08:44 PM
#5
looks epic mate love the fact you just cut and welded on beyond my comfort zone lol

OutlawJapClub Admin Team
Jimbob-T-Lex
21-05-2023, 08:44 PM #5

looks epic mate love the fact you just cut and welded on beyond my comfort zone lol


OutlawJapClub Admin Team

FOSSIL FUELS
Moderator
892
21-05-2023, 10:36 PM
#6
I really like this car as it's finished to a very high standard.

Would like to see more of this car

[Image: Supra-logo-toyota-supras-119417_1569_512...duxjro.jpg]
Toyota Supra Aero Top... In 202 Black and 18" GOLD & Chrome's with a BGW Wink
OutlawJapClub Admin Team
FOSSIL FUELS
21-05-2023, 10:36 PM #6

I really like this car as it's finished to a very high standard.

Would like to see more of this car


[Image: Supra-logo-toyota-supras-119417_1569_512...duxjro.jpg]
Toyota Supra Aero Top... In 202 Black and 18" GOLD & Chrome's with a BGW Wink
OutlawJapClub Admin Team

Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 30
Views 1,554
04-04-2024, 03:25 PM
Last Post by DannyStock
Replies 10
Views 1,319
10-09-2023, 10:23 PM
Last Post by Jimbob-T-Lex
Replies 9
Views 550
05-01-2023, 06:33 PM
Last Post by Jimbob-T-Lex
Replies 16
Views 1,163
05-01-2023, 01:56 PM
Last Post by Jimbob-T-Lex
Replies 362
Views 29,039
06-08-2022, 09:01 AM
Last Post by john wan
Replies 1,318
Views 87,786
05-06-2022, 08:23 AM
Last Post by sarah0
Replies 21
Views 2,549
03-03-2022, 09:52 AM
Last Post by Lexuspat
Replies 509
Views 42,445
02-03-2022, 03:36 PM
Last Post by Rabster
Replies 5
Views 1,710
16-11-2021, 12:10 PM
Last Post by Rabster