Boot lid
Boot lid
All the other bits like locks, lights ets are easy enough.
OH is there anything to gain by re-locating the reverse camera to the lock?? rather than where most people have installed them - next to the number plate lights.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
04-11-2016, 04:09 AM #1Is the boot lid hard to change? From an electrical point of view i.e. does the wiring harness come away from the rest of the car easily enough??
All the other bits like locks, lights ets are easy enough.
OH is there anything to gain by re-locating the reverse camera to the lock?? rather than where most people have installed them - next to the number plate lights.
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
You may not get the correct angle to cover both left/right extremes of the bumper or a good downward angle..
I looked into this but it looked to me that if the boot release in the car/remote decided not to work then you wouldnt have a manual/key release..
worth experimenting if you have the time..
LEXUS IS200 Sport Navigator - 140.8db
Kenwood DNX 8220 BT - Custom OEM Screen Conversion - PS2 - Epic 150
Front: MB Quart QSC216 / Centre: MB Quart PKH110 / Rear:MB Quart RUA213 / Sub: MB Quart PWH 302 x 2 / AMPS: JL 1000/1 - JL 300/4
you could put the camera in the boot lock however..
You may not get the correct angle to cover both left/right extremes of the bumper or a good downward angle..
I looked into this but it looked to me that if the boot release in the car/remote decided not to work then you wouldnt have a manual/key release..
worth experimenting if you have the time..
LEXUS IS200 Sport Navigator - 140.8db
Kenwood DNX 8220 BT - Custom OEM Screen Conversion - PS2 - Epic 150
Front: MB Quart QSC216 / Centre: MB Quart PKH110 / Rear:MB Quart RUA213 / Sub: MB Quart PWH 302 x 2 / AMPS: JL 1000/1 - JL 300/4
Any idea how the wiring loom comes away?
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
FirebirdPhil
04-11-2016, 05:07 AM #3The angle issue was my thinking, didn't think about the boot release issue should the remote or cable ones fail - thanks for that.
Any idea how the wiring loom comes away?
"Life's goal is not to arrive safely at the grave in a well preserved body. But, rather to skid in sideways........
totally worn out and broken, shouting 'Holy ****, WHAT A RIDE!'"
LEXUS IS200 Sport Navigator - 140.8db
Kenwood DNX 8220 BT - Custom OEM Screen Conversion - PS2 - Epic 150
Front: MB Quart QSC216 / Centre: MB Quart PKH110 / Rear:MB Quart RUA213 / Sub: MB Quart PWH 302 x 2 / AMPS: JL 1000/1 - JL 300/4
i think you have to remove the whole loom off the boot itself iirc
LEXUS IS200 Sport Navigator - 140.8db
Kenwood DNX 8220 BT - Custom OEM Screen Conversion - PS2 - Epic 150
Front: MB Quart QSC216 / Centre: MB Quart PKH110 / Rear:MB Quart RUA213 / Sub: MB Quart PWH 302 x 2 / AMPS: JL 1000/1 - JL 300/4
1 Guest(s)
1 Guest(s)
Views 350
Last Post by
Views 1,013
Last Post by
Views 948
Last Post by