bought new ball joints
bought new ball joints
hi guys
do you need to re do your geometry after fitting these?
wahid
yes your better too....
Just ordered me a set of these, thanks for the link mate
used these a couple of weeks ago as ormi says recomended! only isue i had on one side my track rod end had siezed on to the ball joint so got a new one of them as well,
Hi
Sorry to jump this thread Ormi, but i was wondering what made you change your ball joints (i know they are knackered)
But what type of noise does it make .
I have a grinding noise coming from the o/s front wheel and have removed the brake shoes and turned the wheel to see if it is the wheel bearing, but it has no noise at all.
So was wondering what else it could be.
Also is there a special spanner / socket for removing the caliper bolts (main ones) as i have went through two spanners, one socket , one ratchet and two knuckles and i still cannot remove them
Cheers
ydooh
:Mobile:
Right just incase people havent realised (mentioning no names ), this guy has a few other bits at great prices......
2 FRONT UPPER BALL JOINT SET
2 OUTER TIE ROD END SET
2 FRONT Stabilizer Links set
2 REAR STABILIZER LINK SET
These are for the IS, but there are loads of other bits for other cars too