JapCarForum Cars, Cars, Cars! Car Care & Detailing Gtechniq P1 polish/swirl remover

Gtechniq P1 polish/swirl remover

Gtechniq P1 polish/swirl remover

karlp
Senior Member
492
26-03-2018, 09:53 AM
#1
Has anybody used the above by hand and what are the finishes like??
karlp
26-03-2018, 09:53 AM #1

Has anybody used the above by hand and what are the finishes like??

E55EX_RACER
Senior Member
379
10-04-2018, 01:48 AM
#2
It's a very good polish, water based and contains no abrasives, the level of cut is dependent on the pad used. It doesn't leave a finish, it removes scratches, swirls and oxidation so you need to finish with a wax or sealant.

http://www.youtube.com/watch?v=_u-QTCbOUW4

[Image: sig.jpg]
E55EX_RACER
10-04-2018, 01:48 AM #2

It's a very good polish, water based and contains no abrasives, the level of cut is dependent on the pad used. It doesn't leave a finish, it removes scratches, swirls and oxidation so you need to finish with a wax or sealant.

http://www.youtube.com/watch?v=_u-QTCbOUW4


[Image: sig.jpg]

speedfreek
Posting Freak
1,338
06-06-2018, 09:18 AM
#3
I have some and it is excellent. However my Lexus has really hard paint so I would have had a million times better results using a machine.
speedfreek
06-06-2018, 09:18 AM #3

I have some and it is excellent. However my Lexus has really hard paint so I would have had a million times better results using a machine.

Lexusboy
Posting Freak
9,267
06-06-2018, 09:41 AM
#4
Speedfreek sorry bud but your find Lexus paint to be very soft, unless its been resprayed
Lexusboy
06-06-2018, 09:41 AM #4

Speedfreek sorry bud but your find Lexus paint to be very soft, unless its been resprayed

speedfreek
Posting Freak
1,338
06-06-2018, 11:46 AM
#5
In that case, p1 is rubbish lol. I was rubbing like a goodun and it got a lot out but still left a few feint scratches.

Still think the true test is on a machine though Smile

'99 Lexus IS200 SE Navigator


[SIZE=3]'93 Mazda Eunos Roadster Turbo
[/SIZE]

(Current project)

:thumbup1:Follow us on Twitter and join us on Facebook:thumbup1:
speedfreek
06-06-2018, 11:46 AM #5

In that case, p1 is rubbish lol. I was rubbing like a goodun and it got a lot out but still left a few feint scratches.

Still think the true test is on a machine though Smile


'99 Lexus IS200 SE Navigator


[SIZE=3]'93 Mazda Eunos Roadster Turbo
[/SIZE]

(Current project)

:thumbup1:Follow us on Twitter and join us on Facebook:thumbup1:

E55EX_RACER
Senior Member
379
07-06-2018, 02:11 AM
#6
Most Jap paints are soft. It doesn't matter what polish you use if applying by hand it's going to be VERY hard work. So much easier with DA/Rotary Wink

[Image: sig.jpg]
E55EX_RACER
07-06-2018, 02:11 AM #6

Most Jap paints are soft. It doesn't matter what polish you use if applying by hand it's going to be VERY hard work. So much easier with DA/Rotary Wink


[Image: sig.jpg]

Tomo1978
Junior Member
15
17-02-2019, 10:41 PM
#7
I use GTechnique & it's brilliant, if your careful & not using wool you can actually get away with not doing a second stage polish to get rid of marring saving time. I was using Menzerna polishes on my IS220d but Gtechnique is my new weapon of choice. I've even just bought the glass polish & sealant to try so I'll let you all know results when done.
Tomo1978
17-02-2019, 10:41 PM #7

I use GTechnique & it's brilliant, if your careful & not using wool you can actually get away with not doing a second stage polish to get rid of marring saving time. I was using Menzerna polishes on my IS220d but Gtechnique is my new weapon of choice. I've even just bought the glass polish & sealant to try so I'll let you all know results when done.

Recently Browsing
 1 Guest(s)
Recently Browsing
 1 Guest(s)
Related Threads…
Replies 19
Views 2,069
17-02-2019, 10:49 PM
Last Post by Tomo1978
Replies 64
Views 3,352
20-01-2019, 12:59 PM
Last Post by purplewitch
Replies 12
Views 1,061
14-05-2017, 02:41 AM
Last Post by Dave t
Replies 19
Views 1,406
31-03-2017, 12:35 PM
Last Post by E55EX_RACER
Replies 7
Views 765
10-07-2016, 02:25 AM
Last Post by russelllinn
Replies 20
Views 1,324
02-07-2016, 07:05 AM
Last Post by Andy-R.