Unconventional IS200 intake
Unconventional IS200 intake
FunkMasterJay
16-03-2018, 02:02 PM #11OK mate. rather than clog up this thread do you have face book or something?
Click user cp, them click options down the left hand side, then click enable private messaging.
Dark Samurai
16-03-2018, 10:07 PM #13You can't receive pms yet, so do this to enable them:
Click user cp, them click options down the left hand side, then click enable private messaging.
pm enabled now.
Just ordered the 45 degree and 90 degree bends. Just need to get a filter now.
J
FunkMasterJay
17-03-2018, 12:47 AM #14hello mate.
pm enabled now.
Just ordered the 45 degree and 90 degree bends. Just need to get a filter now.
J
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
I think you need to have a certain number of posts before the forum allows the user PMs, guys...
IS200 Sport - Sold
Mazda 6 MPS - Zoom Zoom!
Modifications
Completed:
Currently 280bhp/295lbft; 3" Meercat custom exhaust; KW Suspension; FMIC; SSP; HPFP; Custom Stainless Steel Dials - for the moment, the only set in the world!! (Till the group buy for MPSOC anyway :lol: )
In Progress:
E-Tuning remap ongoing via Cobb Accessport; Braided brake lines; Stubby aerial; Tinted repeaters and sidelights; 3 Port Boost Control Solenoid; 3" HTP Intake
Are the diameters quoted both OD?
It's just that the site I'm looking on uses ODs for alloy tubing, but IDs for the silicone to make it easier to match up.
Whats the OD of the throttle body?
sprinter2012
27-05-2018, 01:06 PM #17Sorry for thread resurection but this seemed the best place to ask this as it's related to the induction kit mentioned.
Are the diameters quoted both OD?
It's just that the site I'm looking on uses ODs for alloy tubing, but IDs for the silicone to make it easier to match up.
Whats the OD of the throttle body?
63mm / 2.5 inch is the Throttle Body OD. You are right, hose is measured in ID and Pipe (steel) is measured in OD.
Hope this helps
J
FunkMasterJay
27-05-2018, 01:09 PM #18Hello mate.
63mm / 2.5 inch is the Throttle Body OD. You are right, hose is measured in ID and Pipe (steel) is measured in OD.
Hope this helps
J
FunkMasterJay Hello mate.
63mm / 2.5 inch is the Throttle Body OD. You are right, hose is measured in ID and Pipe (steel) is measured in OD.
Hope this helps
J
Cheers matey, I'll get ordering then
Also, what filter do people recommend for a DIY induction kit?
sprinter2012
27-05-2018, 01:11 PM #19FunkMasterJay Hello mate.
63mm / 2.5 inch is the Throttle Body OD. You are right, hose is measured in ID and Pipe (steel) is measured in OD.
Hope this helps
J
Cheers matey, I'll get ordering then
Also, what filter do people recommend for a DIY induction kit?
FunkMasterJay
27-05-2018, 01:14 PM #20Something not too deep. I will eventually go for a carbon enclosed box.
J
7 Guest(s)
7 Guest(s)
Views 464
Last Post by
Views 678
Last Post by
Views 1,099
Last Post by
Views 301
Last Post by
Views 1,108
Last Post by
Views 345
Last Post by
Views 446
Last Post by
Views 482
Last Post by
Views 7,689
Last Post by